Abstract:Because of their low density and high specific strength, Mg alloys are considered promising lightweight alloys for various applications. However, due to the high electrochemical activity and poor corrosion resistance, surface modifications of Mg alloys are needed to increase the service life. Hence, an active layered double hydroxides (LDHs) coating was investigated in this study. Owing to the brucite-like layered structure, the weakly bonded interlayer anions can be easily exchanged with other anions in the environment. With the unique anion-exchange mechanism, LDHs coating provides dual protection to the Mg alloy substrate. It can not only act as a physical barrier but also absorb aggressive anions such as Cl - and release corrosion inhibitors to the environment. Compared to the commonly used hydrothermal method to fabricate LDHs coating, which requires high temperature and long process time, electrochemical deposition has the advantages of high deposition rates, simple experimental setup, and highly controllable process parameters. Therefore, in this study, a three-electrode electrochemical setup was used to fabricate Zn-Al LDHs coatings on a ZX21 Mg alloy. Moreover, different anions are intercalated into the interlayer galleries of the prepared Zn-Al LDHs coating through post anion-exchange processes. Through electrochemical analysis in a 3.5 wt% NaCl solution, the prepared anion-exchanged electrodeposited Zn-Al LDHs coating improved the corrosion resistance of ZX21 Mg alloy. Electrochemical impedance spectroscopy (EIS) showed that corrosion impedance increases, while potentiodynamic polarization curves revealed that the corrosion current density ( i corr ) of the coated sample was an order of magnitude lower than the ZX21 Mg alloy substrate. Besides the improvement of corrosion resistance, the formation mechanism of Zn-Al LDHs coating by electrodeposition was also investigated by electrochemical analysis and in situ optical microscopic (OM) observations. The corrosion behavior and microstructure of Zn-Al LDHs coating and the roles played by different intercalated anions will be discussed based on electrochemical analysis and microstructure characterizations. Figure 1

Fabrication of ultra-thin MgAl layered double oxide by cellulose templating and its immobilization effect toward heavy metal ions: cation-exchange and deposition mechanism

Research on the removal of Cr(VI) ions from wastewater by Mg/Al-layered double oxides

Effective adsorption of heavy metals on layered double hydroxides modify through dithiocarbamate prepared by CS 2 and different molecular weight of polyethyleneimine

Efficient and Superstable Mineralization of Toxic Cd2+Ions Through Defect Engineering in Layered Double Hydroxide Nanosheets

Removal of Hg(II) with MgAl-layered double hydroxide functionalized by schiff base ligands: Application and condition optimization

Surface defects enhance the adsorption affinity and selectivity of Mg(OH)2 towards As(v) and Cr(vi) oxyanions: a combined theoretical and experimental study

Synthesis of Layered Double Hydroxides from Municipal Solid Waste Incineration Fly Ash for Heavy Metal Adsorption.

Mixed Oxide Layered Double Hydroxide Materials: Synthesis, Characterization and Efficient Application for Mn2+ Removal from Synthetic Wastewater

The Performance and Mechanism of a Mg-Al Double-Layer Oxide in Chloride ion Removal from an Aqueous Solution

Confinement effect of network-structured carbon dots/cellulose nanocellulose/magnesium hydroxide for enhanced heavy metal ions capture and immobilization

Amino acids-intercalated Mg/Al layered double hydroxides as dual-electronic adsorbent for effective removal of cationic and oxyanionic metal ions

Synthesis of an Mg–Fe–Al layered double oxide with a high arsenic anion adsorption capacity and the establishment of an arsenic anion desorption process

Removal of Cu2+ metal ions from water using Mg-Fe layered double hydroxide and Mg-Fe LDH/5-(3-nitrophenyllazo)-6-aminouracil nanocomposite for enhancing adsorption properties

Hollow microspheres of layered double hydroxides through surfactant-free method enhanced heavy metals removal from soil

Simultaneous toxic Cd(II) and Pb(II) encapsulation from contaminated water using Mg/Al-LDH composite materials

Removal of Cu(II) by mgAl–OH LDHs/birch leaves composites prepared by ball-milling hydrothermal method and mechanism insight

Fabrication of Anion-Exchanged Electrodeposited Zn-Al Layered Double Hydroxides (LDHs) Coating on ZX21 Mg Alloy

Enhanced adsorption effect of defect ordering Mg/Al on layered double hydroxides nanosheets with highly efficient removal of Congo red

Synthesis of stable flowerlike MgAl-LDH@MIL-88A and its adsorption performance for fluoride

Adsorption performance and mechanistic study of Pb, Cd and As by CaAl-LDH in wastewater

Synthesis of High-Crystallinity Mg-Al Hydrotalcite with a Nanoflake Morphology and Its Adsorption Properties for Cu2+ from an Aqueous Solution