High‐gain tapered monopulse antenna based on octuple excitation method in diffusion bonding technology at W‐band

Adham Mahmoud,Takashi Tomura,Mauro Ettorre,David González‐Ovejero,Ronan Sauleau,Jiro Hirokawa

DOI: https://doi.org/10.1049/mia2.12456

2024-03-07

IET Microwaves Antennas & Propagation

Abstract:The authors present the design, fabrication and testing of a highly directive antenna at W‐band for MPT. Diffusion bonding is used to integrate a wideband planar monopulse comparator with a novel corporate feeding network (CFN) used to feed a 48 × 48 slot antenna array. The measured realised gain is more than 35 dBi across the full frequency band. The authors present the design, fabrication and testing of a W‐band monopulse antenna. This antenna consists of three main building blocks: an array with 48 × 48 slots, a tapered corporate‐feed network and a comparator. The comparator has four input ports to generate sum and difference patterns in orthogonal cardinal planes for monopulse operation. A novel octuple excitation is adopted for the corporate network to achieve a side lobe level lower than −20 dB for the sum patterns and simultaneously reduce drastically the manufacturing complexity. Diffusion bonding technology is used for fabrication. Twenty‐four etched copper sheets with a thickness of 0.2 mm are stacked to realise the prototype. The total size of the antenna is 40.76×40.76×1.51λ03 , with λ0 being the wavelength at the centre frequency (94 GHz). The antenna presents an isolation better than 12 dB among the input ports in the 84–100 GHz band. The realised measured gain is 40.7 dBi at 94 GHz. The measured 3‐dB gain bandwidth is 17.4%. The difference patterns at 94.0 GHz present null depths of −24.0, −18.0, −17.5, and −17.4 dB, in the E‐, H‐, 45°‐, and 135°‐planes, respectively.

telecommunications,engineering, electrical & electronic