Abstract:Electrosprays operating in the pure-ion regime (PIR) are of particular interest to space propulsion due to its ability to produce high specific impulse and efficient electrical-tokinetic energy transformation, concurrently with its simplicity and compactness. Unlike electrospray emitters operating in the droplet mode, pure-ion emission using ionic liquids (IL) is known to be highly dependent on the meniscus configuration and the upstream conditions of the source, and consequently permissible under specific circumstances, related to its stability. This has conferred pure-ion sources with increased difficulty in controlling and predicting fundamental beam characteristics such as current emitted, while also making it hard to establish the conditions that need to be met by the device structure to support adequate ion emission. Therefore, leading the design of tips to rely on empirical trends, generically based on trial and error. In this paper, a combination of two computational frameworks are proposed, that aim to push the transition from the current empirical design mindset to a quantitative physicsbased model. The first framework utilizes Darcy’s law to calculate a hydraulic impedance of a given emitter tip design. The second framework combines the impedance of an emitter tip, and the physical properties of an IL to compute useful metrics for propulsion (e.g, current emitted, meniscus stability, and physical fields’ distributions). It is built on the foundation of past research on the Taylor-Melcher multi-physics leaky-dielectric model accounting for charge evaporation. Preliminary results indicate that meniscuses operating in the PIR are small (∼ 1 μm), and need a minimum value of hydraulic impedance to operate in a stable regime. ∗PhD Candidate, Aeronautics and Astronautics, and ximogc@mit.edu. †PhD Candidate, Aeronautics and Astronautics, and Bjarni@mit.edu. ‡M. Alemán-Velasco Professor, Aeronautics and Astronautics, and plozano@mit.edu.

Transient Flow in Porous Electrosprays

Monodisperse Porous Emitter Materials for Ion Electrospray Propulsion

Informing the Design of Pure-ion Electrospray Thrusters via Simulation of the Leaky-Dielectric Model with Charge Evaporation

Electrospray propulsion: Modeling of the beams of droplets and ions of highly conducting propellants

Emission Modes in Electrospray Thrusters Operating with High Conductivity Ionic Liquids

Ionic liquid electrospray behavior in a hybrid emitter electrospray thruster

Spraying mode effect on droplet formation and ion chemistry in electrosprays

Experimental investigation on current modes of ionic liquid electrospray from a coned porous emitter

Simulation of Electrospray Emission Processes for Highly Conductive Liquids

Efficiency Mechanisms in Porous-Media Electrospray Thrusters

Characterization of Conical Ionic Liquid Ion Sources for 2-D Electrospray Thruster Arrays on Porous Substrates

Multiscale modeling of electrospray ion emission

Numerical Investigation of Steady and Transient Ion Beam Extraction Mechanisms for Electrospray Thrusters

Multiplexed Electrospray Emission of Green Energetic Ionic Liquids from Wedge-Shaped Porous Emitters

Application of an Equilibrium Model for an Electrified Fluid Interface—Electrospray Using a PDMS Microfluidic Device

Comparison of computational algorithms for simulating an electrospray plume with a n-body approach

Polyatomic Ion-Induced Electron Emission (IIEE) in Electrospray Thrusters

Fabrication and characterization of a fully conventionally machined, high-performance porous-media electrospray thruster