Modelling the pyrite oxidation level in a refractory gold-bearing stockpile to assess its potential for gold recovery by direct cyanide leaching

Hang Wang,Chaoshui Xu,Peter A. Dowd
DOI: https://doi.org/10.1016/j.mineng.2021.107089
IF: 5.479
2021-09-01
Minerals Engineering
Abstract:This study presents a three-dimensional numerical modelling method for predicting the pyrite oxidation level in refractory gold-bearing stockpiles under various conditions. The physical and chemical processes incorporated into the model include oxygen transport, heat transfer, air convection and pyrite oxidation. Different reaction rate models based on the shrinking core model are used to quantify the oxidation of pyrite grains in rock particles considering the influence of oxygen concentration, degree of water saturation, temperature and pH conditions. The extent of pyrite oxidation is a function of the oxygen concentration gradient within rock particles and is determined by the diffusion–reaction equation using the polar-coordinate system. Particle size distributions for both pyrite grains and rock particles are incorporated in the modelling of pyrite oxidation and oxygen consumption. Several scenarios with different parameters were examined and the simulation results show that after ten years, the pyrite oxidation level over the stockpile is up to 50% depending on the location within the stockpile, the rock types and stockpile properties such as porosity and water content. The model can simulate the overall pyrite oxidation level as well as the oxidation profile of the pyrite grains, i.e., the oxidation depth of pyrite grains of different sizes and at different locations within the rock particles. These are essential inputs required for the estimation of gold recovery by direct cyanide leaching for possible reclamation of the partially oxidised stockpile without incurring expensive pre-treatment of the material.
engineering, chemical,mining & mineral processing,mineralogy
What problem does this paper attempt to address?