Abstract:Hemimorphite is important-supplementary resource for the commercial zinc production, but it easy loses into tailings due to extreme difficulty for its surface sulfidization. Adding active metal ions after sulfidization have been widely proposed for enhancing hemimorphite floatability, but its desired efficiency in flotation practice has not yet been completely achieved caused by the instability of sulfide layer. Whereas pre-adsorption of active metal ions to modify the hemimorphite surface has strong potential to make up for this shortcoming. Herein, the feasibility and appropriate environment of free Pb 2+ for modifying the pure hemimorphite surface was evaluated. Subsequently, the performance of Pb 2+ adsorption for enhancing sulfidization stability and floatability of hemimorphite were investigated. The X-ray photoelectron spectroscopy results indicated that the Pb 2+ adsorption on hemimorphite surface was achieved through the Pb ions displacement for Zn ions, and it was bond to oxygen-containing groups on hemimorphite surface. Such adsorption was strengthened with the increasing of solution pH, owing to the abundant Pb hydroxyl species precipitated on mineral under alkaline conditions, in term of the results of visual MINTEQ modeling and time-of-flight secondary-ion mass spectrometry. In addition, the X-ray photoelectron spectroscopy results showed dominant Pb hydroxyl species further reacted with sulfur during subsequent sulfidization to generate much more S species than that of without Pb 2+ pre-modification. Meanwhile, such sulfide layer composed by Pb 2+ on the mineral surface presented much higher stability than Zn-S species, which was verified via adsorption and desorption tests. As a result, the sulfidization and flotation recovery of hemimorphite increased after Pb 2+ pre-adsorption.

Interaction mechanism of lead ions with stibnite surfaces and enhancement of xanthate adsorption

Behavior of Lead Ions in Cassiterite Flotation Using Octanohydroxamic Acid

Surface modification of azurite with lead ions and its effects on the adsorption of sulfide ions and xanthate species

Activation mechanism of lead ions in the flotation of sulfidized azurite with xanthate as collector

Effects of Pb2+ Ions on the Flotation Behavior of Scheelite, Calcite, and Fluorite in the Presence of Water Glass

Decoupling the effects of solid and liquid phases in a Pb-water glass mixture on the selective flotation separation of scheelite from calcite

Novel catalysis mechanisms of benzohydroxamic acid adsorption by lead ions and changes in the surface of scheelite particles

Effect of Zn<SUP>2+</SUP> and its addition sequence on flotation separation of scheelite from calcite using water glass

Lead Recovery from Zinc Leaching Residue by Flotation

Activation Mechanism of Lead Ions in the Flotation of Sphalerite Depressed with Zinc Sulfate

Adsorption differences of xanthate, dithiophosphate and dithiocarbamate on stibnite (010) surface with Cu 2+ activated: Combined DFT calculations and experiments

Lead species formation on pure hemimorphite surface and its performance for subsequent sulfidization

Unraveling roles of lead ions in selective flotation of scheelite and fluorite from atomic force microscopy and first-principles calculations

Cooperative effect of sodium lauryl sulfate collector and sodium pyrophosphate depressant on the flotation separation of lead oxide minerals from hematite

Effect of dissolved species of cerussite on quartz flotation in sulfidization xanthate system

Experimental and density-functional theory simulation studies on the surface of Mn/Pb-activated scheelite

The Interaction between Iron Cyanide and Lead Ions in Pyrite Flotation

Probing a colloidal lead-group multiple ligand collector and its adsorption on a mineral surface

Adsorption characteristics of Pb(II) ions on sulfidized hemimorphite surface under ammonium sulfate system

Interface Interaction of Benzohydroxamic Acid with Lead Ions on Oxide Mineral Surfaces: A Coordination Mechanism Study

Surface modification mechanism of galena with H2SO4 and its effect on flotation separation performance