Abstract:The aim of this paper is to study the impact of various and arbitrary porous structure on the performance of the step bearing lubricated with magnetic fluid. The paper also studied about the effect of squeeze velocity which appears when two lubricated surfaces approaches to each other with a normal velocity. The porous layer (region or wall or matrix) is attached to the lower flat impermeable plate (surface or disc). Two porous structure models given by Kozeny-Carman (a globular sphere model) and Irmay (a capillary fissures model) are considered for the study. The upper surface is a step surface approaching to lower one. The magnetic field considered here is variable and oblique to the lower plate. Expressions for pressure under the step surfaces and load-carrying capacity are obtained. The dimensionless load-carrying capacity [Formula: see text] is calculated for various values of permeability, porous width, length of first step of the bearing, width of the film region, and strength of magnetic field. From the results it is observed that [Formula: see text] increases with the increase of the length of the first step and with the increase of K (which leads increase of H) for both the models. It is also observed that permeability and width of porous matrix have almost no effect on [Formula: see text] . In the case of width of the film region, it is observed that [Formula: see text] attains same behavior whether film thickness is small or large. Moreover, calculation shows that globular sphere model have better performance for [Formula: see text] than capillary fissures model. Thus, it is suggested to have a design of porous squeeze step bearing with globular spheres in the porous region considering variable magnetic field strength H of order 10 4 .

Influence of roughness patterns and slip velocity on the lubrication of MHD-affected secant curved annular plates

Insight into the dynamics of couple-stress fluid through the porous medium between a curved circular plate and a rough flat plate: comparative analysis between radial and azimuthal roughness

Combined effect of magneto hydrodynamics, couple stress, and viscosity variation on squeeze film characteristics of a cylinder and rough flat plate

Magnetohydrodynamics and viscosity variation in couple stress squeeze film lubrication between rough flat and curved circular plates

Effect of magnetic field and slip velocity on the performance of bearings lubricated by couple stress fluid on long cylinder and infinite plate — A theoretical analysis

Combined effect of circumferential roughness and squeeze velocity on ferrofluid squeeze film with rotating sphere and rough plate

Ferrofluid lubrication of circular squeeze film bearings controlled by variable magnetic field with rotations of the discs, porosity and slip velocity

Study on the Influence of Surface Roughness on Wall Slip Effect (in Rheological Measurement) of Magnetic Fluid

An Effect of a Porous Structure, Slip Velocity and Rosensweig’s Viscosity on the Ferrofluid Based Squeeze Film in Porous Curved Annular Plates

Semi-analytical approach-based studies of the squeeze film lubrication between rough porous annular discs: Rabinowitsch fluid model

MHD Effect on Porous Wide Composite Slider Bearing Lubricated with a Couplestress Fluids

Optimization of Surface Drag Reduction Attribute of Non-Newtonian Nanofluids Flow Driven by Magnetic Dipole Enabled Curved Sheet

Effect of Surface Roughness and Viscosity-Pressure Dependency on the Couple Stress Squeeze Film Characteristics of Parallel Circular Plates

Analysis of the Lubrication Performance of Bearing with Non-Newtonian Magnetic Fluids with Considering Stress Couple Effect

Effects of Surface Roughness on the Mixed Thermal Elstohydrodynamic Lubrication Characteristics of Surface Textured Slipper Bearing in Axial Piston Pump

Parallel surface squeeze film bearing using ferrofluid lubricant controlled by transverse magnetic fields

Combined effects of turbulence and elastic deformation on the performance of a journal bearing lubricated with a couple stress fluid

Impact of various and arbitrary porous structure in the study of squeeze step bearing lubricated with magnetic fluid considering variable magnetic field

Coupled nonlinear effects of random surface roughness and rarefaction on slip flow in ultra-thin film gas bearing lubrication

Effect of Surface Roughness on the Stick-slip Behavior of Magnetic Field Controlled-dipolar Suspensions in Simple Linear Shear Mode

Numerical analysis of a rigid rotor mounted on four-pad hydrostatic squeeze film damper lubricated with micropolar lubricant