Abstract:A discrete element method (DEM) model is developed to simulate the dynamics of wet, flexible fibers. The angles of repose of dry and wet fibers are simulated, and the simulation results are in good agreement with experimental results, validating the wet, flexible fiber model. To study wet fiber flow behavior, the model is used to simulate shear flows of wet fibers in a periodic domain under Lees-Edwards boundary conditions. Significant agglomeration is observed in dilute shear flows of wet fibers. The size of the largest agglomerate in the flow is found to depend on a Bond number, which is proportional to liquid surface tension and inversely proportional to the square of the shear strain rate. This Bond number reflects the relative importance of the liquid-bridge force to the particle's inertial force, with a larger Bond number leading to a larger agglomerate. As the fiber aspect ratio (AR) increases, the size of the largest agglomerate increases, while the coordination number in the largest agglomerate initially decreases and then increases when the AR is greater than four. A larger agglomerate with a larger coordination number is more likely to form for more flexible fibers with a smaller bond elastic modulus due to better connectivity between the more flexible fibers. Liquid viscous force resists pulling of liquid bridges and separation of contacting fibers, and therefore it facilitates larger agglomerate formation. The effect of liquid viscous force is more significant at larger shear strain rates. The solid-phase shear stress is increased due to the presence of liquid bridges in moderately dense flows. As the solid volume fraction increases, the effect of fiber-fiber friction coefficient increases sharply. When the solid volume fraction approaches the maximum packing density, the fiber-fiber friction coefficient can be a more dominant factor than the liquid bridge force in determining the solid-phase shear stress.

Dynamics of fibers in a wide microchannel

Dynamics of rigid fibers interacting with triangular obstacles in microchannel flows

Dynamics of Fluid Displacement in Mixed-Wet Porous Media

Dynamics of flexible fibers in viscous flows and fluids

Fiber Orientation Distributions in Slit Channel Flows with Abrupt Expansion for Fiber Suspensions

Microstructures of fiber suspensions in complex geometry

Dynamics of flexible fibers in shear flow

Hydrodynamic Instability of Fiber Suspensions in Channel Flows

Discrete element simulation studies of angles of repose and shear flow of wet, flexible fibers.

Numerical Simulation of Interactions Between Rigid Rod-Like Polymers and Coherent Structures in a Mixing Layer

A simulation platform for slender, semiflexible, and inextensible fibers with Brownian hydrodynamics and steric repulsion

Coarse-graining the dynamics of immersed and driven fiber assemblies

Cross-streamline migration and near-wall depletion of elastic fibers in micro-channel flows

Dynamics of Sedimentation of Flexible Fibers in Moderate Reynolds Number Flows

Complex dynamics of long, flexible fibers in shear

On the Relative Rotational Motion Between Rigid Fibers and Fluid in Turbulent Channel Flow

A fast platform for simulating flexible fiber suspensions applied to cell mechanics

The dynamics of fibers dispersed in viscoelastic turbulent flows

An integral-based spectral method for inextensible slender fibers in Stokes flow

Semiflexible polymer conformation, distribution and migration in microcapillary flows