The Effect of Bacteria-to-Calcium Ratio on Microbial-Induced Carbonate Precipitation (MICP) under Different Sequences of Calcium-Source Introduction

Teng Zhao,Hongxiu Du,Ruihua Shang
DOI: https://doi.org/10.3390/ma17081881
IF: 3.4
2024-04-20
Materials
Abstract:To explore the effects of the introduction order of calcium sources and the bacteria-to-calcium ratio on the microbially induced calcium carbonate precipitation (MICP) product CaCO3 and to achieve the regulation of CaCO3 crystal morphology, the mineralisation products of MICP were compared after combining bacteria and calcium at ratios of 1/9, 2/9, 3/9, 4/9, 5/9, and 6/9. A bacterial solution was combined with a urea solution in two calcium addition modes: calcium-first and calcium-later modes. Finally, under the calcium-first addition method, the output of high-purity vaterite-type CaCO3 was achieved at bacteria-to-calcium ratios of 2/9 and 3/9; under the calcium-later addition method, the output of calcite-type CaCO3 could be stabilised, and the change in the bacteria-to-calcium ratio did not have much effect on its crystalline shape.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to explore the influence of different ratios of bacteria to calcium (bacteria - calcium ratio) on microbially - induced calcium carbonate precipitation (MICP), and to discuss how to control the morphology of CaCO₃ crystals by adjusting the bacteria - calcium ratio under different orders of calcium source addition. Specifically, the research aims to: 1. **Explore the order of calcium source addition**: Compare the effects of two methods, adding the calcium source first and adding it later, on the MICP process. 2. **Influence of the bacteria - calcium ratio**: Study the effects of different bacteria - calcium ratios (1/9, 2/9, 3/9, 4/9, 5/9, 6/9) on the yield and crystallization morphology of CaCO₃, the product of MICP. 3. **Regulate crystal morphology**: Realize the regulation of CaCO₃ crystal morphology by changing the order of calcium source addition and the bacteria - calcium ratio. ### Main research contents - **Experimental design**: - Prepare solutions with different bacteria - calcium ratios. - Conduct experiments using the methods of adding the calcium source first and adding it later respectively. - Observe and analyze the CaCO₃ precipitation under different conditions. - **Measurement methods**: - Use means such as X - ray diffraction (XRD), scanning electron microscope (SEM), energy - dispersive spectroscopy (EDS), thermogravimetric - differential scanning calorimetry (TG - DSC) and nanoindentation test to analyze the crystal structure, morphology, chemical composition and mechanical properties of the mineralized products. ### Experimental results - **Influence of the order of calcium source addition**: - Adding the calcium source first (Group A): The deposition rate of CaCO₃ is slow, the product is in a flocculent suspension, the color is yellowish, and it slowly deposits at the bottom of the bottle. - Adding the calcium source later (Group B): The deposition rate of CaCO₃ is significantly accelerated, the product is white, it quickly deposits at the bottom of the bottle, and the stratification between the solution and the mineralized product is obvious. - **Influence of the bacteria - calcium ratio**: - When the bacteria - calcium ratio increases from 1/9 to 2/9, the CaCO₃ yield in the group adding the calcium source first (Group A) increases significantly, from 22.48% to 70.01%. - The change in the CaCO₃ yield in the group adding the calcium source later (Group B) is not significant, but as the bacteria - calcium ratio increases, the yield gradually approaches 100%. - **Regulation of crystal morphology**: - Under the condition of adding the calcium source first, as the bacteria - calcium ratio increases, the main crystal phase of CaCO₃ changes from calcite to aragonite. - Under the condition of adding the calcium source later, the main crystal phase of CaCO₃ is always calcite, and the purity is relatively high, and the change in the bacteria - calcium ratio has little influence on its crystal phase. ### Conclusions - By changing the order of calcium source addition and the bacteria - calcium ratio, the crystal morphology and yield of CaCO₃ can be effectively regulated. - Under the condition of adding the calcium source first, a higher bacteria - calcium ratio is conducive to the formation of aragonite - type CaCO₃. - Under the condition of adding the calcium source later, CaCO₃ mainly exists in the calcite type, and the change in the bacteria - calcium ratio has little influence on its crystal phase, which is suitable for the stable formation of calcite - type CaCO₃. This research provides important theoretical basis and technical support for the application of microbially - induced calcium carbonate precipitation.