Abstract:The solidification/stabilization (S/S) method is the usual technique for the remediation of soils polluted by heavy metal in recent years. However, freeze-thaw cycles, an important physical process producing weathering of materials, will affect the long-term stability of engineering characteristics in solidified contaminated soil. In addition, it is still questionable whether using large dosages of binders can enhance the engineering properties of solidified/stabilized contaminated soils. In this study, the three most commonly used binders (i.e., cement, quicklime, and fly ash), alone and mixed in different ratios, were thus added to lead-contaminated soil in various dosages, making a series of cured lead-contaminated soils with different dosages of binders. Afterward, unconfined compression strength tests, direct shear tests, and permeability tests were employed on the resulting samples to find the unconfined compressive strength (UCS), secant modulus ( E 50 ), internal friction angle ( φ ), cohesion ( c ), and permeability coefficient ( k ) of each solidified/stabilized lead-contaminated soil after 0, 3, 7, and 14 days of freeze-thaw cycles. This procedure was aimed at evaluating the influence of freeze-thaw cycle and binder dosage on engineering properties of solidified/stabilized lead-contaminated soils. Results of our experiments showed that cement/quicklime/fly ash could remediate lead-contaminated soils. However, it did not mean that the more the dosage of binder, the better the curing effect. There was a critical dosage. Excessive cementation of contaminated soils caused by too much binder would result in loss of strength and an increase in permeability. Furthermore, it was found that UCS,   E 50 , φ , c , and k values generally decreased with the increase in freeze-thaw cycle time-a deterioration effect on the engineering characteristics of solidified lead-contaminated soils. Avoiding excessive cementation, 2.5% cement or quicklime was favorable for the value of E 50 while a 2.5% fly ash additive was beneficial for the k value. It is also suggested that if the freeze-thaw cycle continues beyond the period supported by excessive cementation, such a cycle will rapidly destroy the original structure of the soil and create large cracks, leading to an increase in permeability. The results also showed that the contaminated soils with a larger dosage of binders exhibited more significant deterioration during freeze-thaw cycles.

Environmental performance of reusing a contaminated soil solidified/stabilized by a low-carbon binder as roadway subgrade material

Environmental behavior and engineering performance of self-developed silico-aluminophosphate geopolymer binder stabilized lead contaminated soil

Geoenvironmental properties of industrially contaminated site soil solidified/stabilized with a sustainable by-product-based binder

Sustainable stabilization/solidification of the Pb, Zn, and Cd contaminated soil by red mud-derived binders

In-situ solidification/stabilization of heavy metals contaminated site soil using a dry jet mixing method and new hydroxyapatite based binder

Time-dependent performance of soil mix technology stabilized/solidified contaminated site soils

Sustainable stabilization/solidification of arsenic-containing soil by blast slag and cement blends

An evaluation of stabilised/solidified contaminated model soil using PC-based and MgO-based binders under semi-dynamic leaching conditions

Environmental, economic, and social sustainability assessment: A case of using contaminated tailings stabilized by waste-based geopolymer as road base

Cement and zeolite stabilization/solidification of heavy metal-contaminated sediments: 841-Day leaching characteristics, mechanisms, and microstructure

Assessment of the long-term leaching characteristics of cement-slag stabilized/solidified contaminated sediment

Three-Dimensional Plasmonic Photocatalyst Consisting of Faceted Gold Nanoparticles and Radial Titanium(IV) Oxide Heteromesocrystals

Industrial by-products-derived binders for in-situ remediation of high Pb content pyrite ash: Synergistic use of ground granulated blast furnace slag and steel slag to achieve efficient Pb retention and CO 2 mitigation

Influence of Freeze-Thaw Cycles and Binder Dosage on the Engineering Properties of Compound Solidified/Stabilized Lead-Contaminated Soils

Evaluation of the effectiveness of ex-situ stabilization for arsenic and antimony contaminated soil: Short-term and long-term leaching characteristics

High industrial solid waste road base course binder: Performance regulation, hydration characteristics and practical application

Mechanical Properties and Leaching Characteristics of Geopolymer-Solidified/Stabilized Lead-Contaminated Soil

Study on the strength, leachability, and electrical resistivity of lead-contaminated soil solidified with a slag-based binder

A laboratory investigation and numerical modeling on fiber reinforced lime and alkaline binder stabilized pavement subgrade soil

Investigation into the Enhancement Characteristics of Fly Ash and Polypropylene Fibers on Calcium Carbide-Residue-Stabilized Soil

Green remediation of contaminated sediment by stabilization/solidification with industrial by-products and CO2 utilization