Abstract:The solid oxide fuel cell (SOFC) anode is often composed of nickel (Ni) and yttria-stabilized zirconia (YSZ). The yttria is added in small quantities (e.g., 8 mol %) to maintain the crystallographic structure throughout the operating temperatures (e.g., room-temperature to >800 °C). The YSZ skeleton provides a constraining structural support that inhibits degradation mechanisms such as Ni agglomeration and thermal expansion miss-match between the anode and electrolyte layers. Within this structure, the Ni is deposited in the oxide form and then reduced during start-up; however, exposure to oxygen (e.g., during gasket failure) readily re-oxidizes the Ni back to NiO, impeding electrochemical performance and introducing complex structural stresses. In this work, we correlate lab-based X-ray computed tomography using zone plate focusing optics, with X-ray synchrotron diffraction computed tomography to explore the crystal structure of a partially re-oxidized Ni/NiO-YSZ electrode. These state-of-the-art techniques expose several novel findings: non-isotropic YSZ lattice distributions; the presence of monoclinic zirconia around the oxidation boundary; and metallic strain complications in the presence of variable yttria content. This work provides evidence that the reduction–oxidation processes may destabilize the YSZ structure, producing monoclinic zirconia and microscopic YSZ strain, which has implications upon the electrode’s mechanical integrity and thus lifetime of the SOFC.

High-temperature Raman spectroscopy of solid oxide fuel cell materials and processes.

In-situ Raman spectroscopy analysis of the interfaces between Ni-based SOFC anodes and stabilized zirconia electrolyte

The Detection of Monoclinic Zirconia and Non-Uniform 3D Crystallographic Strain in a Re-Oxidized Ni-YSZ Solid Oxide Fuel Cell Anode

Insight into Carbon Removal from Solid Oxide Fuel Cells via Operando Spectroscopy

Rational SOFC material design: new advances and tools

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Application of Infrared Thermal Imaging to Map Stress Distributions in a Solid Oxide Fuel Cell

Structural and compositional characterization of yttria-stabilized zirconia: evidence of surface-stabilized, low-valence metal species

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Thin-film solid oxide fuel cell with high performance at low-temperature

Quantifying microstructure features for high performance solid oxide cells

Apparatus for Operando X-ray Diffraction of Fuel Electrodes in High Temperature Solid State Electrochemical Cells

Impedance analysis of thin YSZ electrolyte for low-temperature solid oxide fuel cells

Electrochemical Performance and Stability of Sr-doped LaMnO 3 -Infiltrated Yttria Stabilized Zirconia Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Visualizing the Structural Evolution of LSM/ X YSZ Composite Cathodes for SOFC by In-Situ Neutron Diffraction

In-situ Analysis of Anode Atmosphere in a Flat-Tube Solid Oxide Fuel Cell Operated with Dry Reforming of Methane

In situ XAFS–XRD study of the Zr–Y2O3 interaction at extra‐high temperatures

Impact of yttria-stabilized zirconia contents in nickel cermet anodes for intermediate temperature-operated syngas-fueled thin film solid oxide fuel cells

Quantifying Microstructure Features for High-Performance Solid Oxide Cells

Performance and Electrochemical Analysis of Solid Oxide Fuel Cells Based on LSCF‐YSZ Nano‐electrode