Anisotropic characteristics of layered backfill: Mechanical properties and energy dissipation

Huisheng Qu,Lang Liu,Yonglu Suo,Mengbo Zhu,Pan Yang,Caixing Zhang,Geng Xie
DOI: https://doi.org/10.1016/j.jrmge.2023.02.034
IF: 5.915
2023-11-02
Journal of Rock Mechanics and Geotechnical Engineering
Abstract:Highlights • The concept of angular layered backfilling body was proposed. • Relationships between layer parameters, P-wave velocity and strength were studied. • Influences of layer parameters on energy dissipation were estimated. • Fracture development and failure mode of layered backfill were explored. • Analysis of layer effect and suggestions for engineering practice were given. Layered backfill is commonly used in mining operations, and its mechanical behavior is strongly influenced by delamination parameters. In this study, 13 specimens with different numbers of delamination and delamination angle were prepared to investigate the anisotropic mechanical behavior, energy dissipation characteristics and crack development of backfill. P-wave velocity, uniaxial compression, scanning electron microscope (SEM), and acoustic emission (AE) experiments were conducted. The results indicate that: (1) The P-wave velocity has linear and elliptical relationships with the number of delamination surface and delamination angle, respectively; the strength, delamination parameters and P-wave velocity show a high degree of coincidence in terms of their function relationship, which can realize the rapid prediction of strength. (2) The microstructure of the delaminated surface is looser than that of the matrix, leading to a decrease in strength and an increase at the pore-fissure compaction stage. The number and angle of delamination increases linearly with the anisotropy coefficient. (3) The energy evolution in angle-cut backfill can be divided into four stages, with a decrease in the proportion of elastic energy at the initiation stress and peak stress with increasing number of delamination planes and delamination angle. (4) Crack development increases with the number of delamination surface and delamination angle, resulting in a decrease in energy dissipation coefficient and peak AE energy. These findings provide valuable insights for the design of filling materials and processes in mining operations.
engineering, geological
What problem does this paper attempt to address?