Abstract:The physical mechanisms for the size effects on the flow and heat transfer have been divided into two classifications: (a) variations of the predominant factors influence the relative importance of various phenomena in the flow and heat transfer as the characteristic length decrease, even if the continuum assumption is still valid; (b) the continuum assumption breaks down as the characteristic length of the flow becomes comparable to the mean free path of the molecules. The departure of most flow and thermal phenomena in the MEMS from conventional ones is due to the variation of predominant factors in the flow and heat transfer problems, rather than that Navier-Stokes equation and Fourier heat conduction equation etc are no longer valid. Due to the larger surface to volume ratio for microchannels and microdevices, factors related to surface effects have more impact to microscale flow and heat transfer. For example, surface friction induced flow compressibility makes the fluid velocity profiles flatter and leads to higher friction factors and Nusselt numbers; surface roughness is likely responsible for the increased friction factor; the early transition from laminar to turbulent flow and Nusselt number; and other effects, such as the axial heat conduction in the channel wall, the channel surface geometry, surface electrostatic charges, and measurement errors, could lead to different flow and heat transfer behaviors from that at conventional scales. The condensation/evaporation across the liquid-vapor interface and the liquid-vapor nucleation are processes at nanometer scale. In these cases the macroscopic approach is hard to reveal the details at nanometer scales, while the molecular dynamic simulation is a powerful tool to describe such microscopic processes, and has been applied to investigate the density and temperature profiles across the liquid-vapor interface. The condensation coefficient on the liquid-vapor interface under thermodynamic equilibrium condition has been well predicted based on. the characteristic time method, which can distinguish the condensed particles from the reflected particles. Molecular dynamics simulations show that liquid-vapor nucleation undergoes three stages, namely, cavity growth, cavity coalescence and bubble formation.

Laminar jet flow at the microscale: The characteristic sizes and the wave development

Hydrodynamics and Local Turbulent Mixing of Submerged, Parallel Liquid Jets: Experiments and CFD Simulations

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

Spray Trajectory and 3D Droplets Distribution of Liquid Jet in Crossflow with Digital Inline Holography

Experimental Investigation on Submerged Gas-Liquid Mixture Injection into Water Through A Micro-Channel

Experimental Study on Gas-Liquid Flow Characteristics of Submerged Air Jets

A Micro-Capillary Jetting Technology for Liquid-Liquid Microdispersion with Narrow Size Distribution

Jet Formation During the Gas Penetration Through a Thin Liquid Layer

Beating the jetting regime

Hydrodynamics and Scaling Laws of Gas–Liquid Taylor Flow in Viscous Liquids in a Microchannel

Synthesis of Scalable Micro-Droplets with Heat-Driven Effect in Flow-Focusing Device.

Inner circulation flow characteristics of coalescence droplets in microchannel

SOME FLOW AND THERMAL PHENOMENA AT MICROSCALE

Numerical and experimental investigation of dripping and jetting flow in a coaxial micro-channel

Effects of Coherent Structures on Nanoparticle Coagulation and Dispersion in a Round Jet

SOME FLOW AND THERMAL PHENOMENA AT MICRO/NANO SCALE

Universal self-scalings in a micro-co-flowing

Bubble Statistics in Shallow Angle Plunging Liquid Jets

Detailed Numerical Simulation of Multi-scale Interface-Vortex Interactions of Liquid Jet Atomization in Crossflow

Periodic and aperiodic bubbling in submerged gas-liquid jets through a micro-channel

Experimental investigation on flow characteristics and instability of submerged high-speed gaseous jets under co-flow