Abstract:Nonthermal discharges in atmospheric pressure air in contact with water produce large amounts of reactive species in the gas phase that can enter into the water by diffusion, thus inducing the formation of secondary reactive species in the liquid phase, including those long-lived species such as NO<inline-formula> <tex-math notation="LaTeX">$_{2}^{-}$ </tex-math></inline-formula>, NO<inline-formula> <tex-math notation="LaTeX">$_{3}^{-}$ </tex-math></inline-formula>, and H2O2. Depending on the controllable parameters of the discharge, the plasma activated water (PAW) may acquire different physicochemical properties, resulting in various applications. Physicochemical measurements of PAW obtained by means of a water-cathode glow-type discharge in atmospheric pressure air operating in open and closed reactor conditions are reported. The discharge was operated in a millisecond pulsed-dc regime at an rms current value of 100 mA and a power of 100 W. A large volume of 1 L of distilled water was treated for 30 min. In both cases, low pH values of <inline-formula> <tex-math notation="LaTeX">$\sim $ </tex-math></inline-formula>2.5 and very high levels of NO<inline-formula> <tex-math notation="LaTeX">$_{3}^{-}$ </tex-math></inline-formula> (up to 250 mg/L) in PAW were obtained; however, in the closed system, no H2O2 was found and high concentrations of nitrite (120 mg/L) were measured, while in the open system, large levels of H2O2 were observed (45 mg/L) and no NO<inline-formula> <tex-math notation="LaTeX">$_{2}^{-}$ </tex-math></inline-formula> was found. Likewise, the electrical conductivity value for the closed reactor (<inline-formula> <tex-math notation="LaTeX">$\approx 2000 \mu \text{S}$ </tex-math></inline-formula>/cm) was significantly higher than for the open reactor (<inline-formula> <tex-math notation="LaTeX">$\approx 1000 \mu \text{S}$ </tex-math></inline-formula>/cm). The reasons for these different behaviors in terms of PAW chemistry are discussed. Also, the time stability of PAW was measured.

Ultralong-lasting plasma-activated water: production and control mechanisms

Water disinfection by pulsed atmospheric air plasma along water surface

Off-site production of plasma-activated water for efficient disinfection: The crucial role of high valence NOx and new chemical pathways

Off-site production of plasma-activated water for efficient sterilization: the crucial role of high-valence NOx and new chemical pathways

Plasma Acid: Water Treated by Dielectric Barrier Discharge

Post-Discharge Evolution Of Reactive Species In The Water Activated By A Surface Air Plasma: A Modeling Study

The Optimization of Plasma Activated Water ( PAW ) Generation and the Inactivation Mechanism of PAW on Escherichia Coli

Plasma Re-Activation: a Promising Approach to Enhance Chemical Activity for Plasma Activated Water

Upgrading the Production of Plasma-Activated Water for Sterilization by Preloading Long-Lived Reactive Species

Global Model of Plasma-Activated Water over Long Time Scale: Pulsed Discharge and Afterglow

Insights into the mechanisms of plasma physicochemical characteristics on ultralong-lasting plasma-activated water: The influence of DC power polarity on RONS generation

Assessment of the Physicochemical Properties and Biological Effects of Water Activated by Non-Thermal Plasma above and Beneath the Water Surface

Inactivation Efficacy and Mechanisms of Plasma Activated Water on Bacteria in Planktonic State.

Plasma-Activated Hydrogels for Microbial Disinfection

Continuous production for large quantity plasma activated water using multiple plasma device setup

Plasma-activated water retains antimicrobial properties against Escherichia coli after 72 hours of storage

Nitrox surface discharge used for water activation: the reactive species and their correlation to the bactericidal effect

The Rapid Decrease in the Biological Reactivity of Water Activated by Air Spark Discharge Plasma

Physicochemical Properties and Time Stability of Plasma Activated Water by a Liquid-Cathode Glow-Type Discharge in Air: The Effect of Air Confinement

Plasma-Activated Water: Physicochemical Properties, Microbial Inactivation Mechanisms, Factors Influencing Antimicrobial Effectiveness, And Applications In The Food Industry

Plasma-activated Water: Perspective of the Theoretical Model, Safety Assessment and Application in Animal-Derived Products