Abstract:Hydrogen sulfide is hazardous and toxic, and is present at many waste streams of industry processes. Anodic sulfide oxidation is a potentially effective approach to remove sulfide in aqueous media. This study therefore prepared and optimized surface oxide film on AISI 304 stainless steel (SS) as active and stable anode for sulfide removal. Among stainless steel samples of different anodization pretreatment duration, the anode with 15 min pretreatment (SS-15) resulted in the best sulfide removal at the same testing conditions, and achieved 48% and 18% improvement in terms of sulfide removal efficiency compared with the untreated SS and graphite, respectively. ANOVA-based tests (overall and for pairwise comparisons) also suggest the data are indeed valid. When anode potential was set no more than 1.62 V vs. reversible hydrogen electrode (RHE), direct sulfide oxidation dominated; and further increase in anode potential would initiate oxygen evolution reaction (OER) which contributed to indirect sulfide oxidation. Surface characterization found that the varying corrosion pre-treatment duration led to oxide films of different thickness and chemical composition. The pretreatment duration from 15 min to 90 min increased the oxide film thickness from 178 nm to 264 nm and decreased the composition of FeOOH and NiOOH, which were most likely the catalytic active species for sulfide oxidation revealed by high -resolution XPS. Electrochemical analysis confirmed that the smaller thickness and enriched FeOOH/NiOOH composition in SS-15 led to a lower charge transfer resistance, a lower mass transfer resistance, and meanwhile a greater material stability. Depth profiling via high-resolution XPS identified metallic Fe inside oxide films and its presence may also promote the conductivity of the oxide film. This study demonstrated that anodization pre-treatment of stainless steel was able to prepare effective and stable anode for electrochemical sulfide removal by controlling the thickness and composition of oxide films.

Anodized stainless steel as a durable and stable catalyst for Photo-Fenton degradation of organic contaminants

Controlling the Thickness and Composition of Stainless Steel Surface Oxide Film for Anodic Sulfide Removal

Base-metal Oxide Semiconductor Electrodes for PPCP Degradation: Ti-doped Α-Fe2o3 for Sulfosalicylic Acid Oxidation As an Example.

Porous Photo-Fenton Catalysts Rapidly Triggered by Levodopa-Based Mussel-Inspired Coatings for Enhanced Dye Degradation and Sterilization.

Dual Modification of Stainless Steel by Small Molecule Oxalic Acid for Oxygen Evolution Reaction

Cu-MOF for effectively organic pollutants degradation and E. coli inactivation via catalytic activation of peroxymonosulfate

Modification of α-Fe2O3 Nanoparticles with Carbon Layer for Robust Photo-Fenton Catalytic Degradation of Methyl Orange

Development and evaluation of a novel flexible UV-LED TiO2/graphite photoanode for the removal of organic pollutants in water

Anodic Fenton Process Assisted by a Microbial Fuel Cell for Enhanced Degradation of Organic Pollutants.

Development of MoS2-stainless steel catalyst by 3D printing for efficient destruction of organics via peroxymonosulfate activation

Aeration‐Free Photo‐Fenton‐Like Reaction Mediated by Heterojunction Photocatalyst toward Efficient Degradation of Organic Pollutants

Nano-PAA-CuCl2 Composite as Fenton-Like Reusable Catalyst to Enhanced Degrade Organic Pollutant MB/MO

Fe Single-Atom Catalyst for Efficient and Rapid Fenton-Like Degradation of Organics and Disinfection against Bacteria.

In Situ Organic Fenton-like Catalysis Triggered by Anodic Polymeric Intermediates for Electrochemical Water Purification.

Fenton-like membrane reactor assembled by electron polarization and defect engineering modifying Co3O4 spinel for flow-through removal of organic contaminants

Degradation of Organic Methyl Orange (MO) Dye Using a Photocatalyzed Non-Ferrous Fenton Reaction

Activation stainless steel with electrochemical etching-hydrothermal as an efficient and stable alkaline water oxidation electrode

Electronic structure regulation of Fe single atom coordinated nitrogen doping MoS2 catalyst enhances the Fenton-like reaction efficient for organic pollutant control

Ru Single Atom Catalyst with Dual Reaction Sites for Efficient Fenton-Like Degradation of Organic Contaminants

Electrochemical Advanced Oxidation combined to Electro-Fenton for effective Treatment of Perfluoroalkyl substances "PFAS" in Water using a Magnéli phase-based Anode

A Facile Solution to Mature Cathode Modified by Hydrophobic Dimethyl Silicon Oil (DMS) Layer for Electro-Fenton Processes: Water Proof and Enhanced Oxygen Transport