Abstract:Poly(dimethylsiloxane) (PDMS) materials have been extensively shown to function as excellent fouling-release (FR) coatings in the marine environment. The incorporation of biocide moieties, such as quaternary ammonium salts (QAS), can impart additional antibiofouling properties to PDMS-based FR coating systems. In this study, the molecular surface structures of two different types of QAS-incorporated PDMS systems were investigated in different chemical environments using sum frequency generation vibrational spectroscopy (SFG). Specifically, a series of PDMS coatings containing either a QAS with a single ammonium salt group per molecule or a quaternary ammonium-functionalized polyhedral oligomeric silsesquioxane (QPOSS) were measured with SFG in air, water, and artificial seawater (ASW) to investigate the relationships between the interfacial surface structures of these materials and their antifouling properties. Although previous studies have shown that the above-mentioned materials are promising contact-active antifouling coatings, slight variations of the QAS structure can lead to substantial differences in the antifouling performance. Indeed, the SFG results presented here indicated that the surface structures of these materials depend on several factors, such as the extent of quaternization, the molecular weight of the PDMS component, and the functional groups of the QAS used for incorporation into the PDMS matrix. It was concluded that in aqueous environments a lower extent of QPOSS quaternization and the use of ethoxy (instead of methoxy) functional groups for QAS incorporation facilitated the extension of the alkyl chains away from the nitrogen atom of the QAS on the surface. The SFG results correlated well with the antifouling activity studies that indicated that the coatings exhibiting a lower concentration of longer alkyl chains protruding out of the surface can neutralize microorganisms more effectively, ultimately leading to better antifouling performance. Furthermore, the results of this study provide additional evidence that incorporated QAS exert their antimicrobial activity through a two-step interaction. The first step is the adsorption of the bacteria on the surface as a result of the electrostatic attraction between the negatively charged microorganisms and the positively charged QAS nitrogen atoms on the surface. The second step is the disruption of the cell membranes by the penetration of the QAS long, extended alkyl chains.

Preparation of intrinsic antibacterial silicone rubber with matrix tethering quaternary ammonium salt groups

Preparation and antibacterial properties of silicone-modified polyurethane with pendent quaternary ammonium salts

Sodium alginate coupled with organosilane quaternary ammonium salt for the antibacterial application

Preparation, Surface Properties, and Antibacterial Activity of A Poly(Dimethyl Siloxane) Network Containing A Quaternary Ammonium Salt Side Chain

Durable and Covalently Attached Antibacterial Coating Based on Post-Crosslinked Maleic Anhydride Copolymer with Long-Lasting Performance

A Printing-Spray-transfer Process for Attaching Biocompatible and Antibacterial Coatings to the Surfaces of Patient-Specific Silicone Stents

Microstructure and Antibacterial Performance of Functionalized Polyurethane Based on Polysiloxane Tethered Cationic Biocides

Covalent bonding of quaternary ammonium compounds and zwitterionic polymer functional layers on polydimethylsiloxane against Escherichia Coli adhesion

Preparation of Crosslinked Polystyrenes with Quaternary Ammonium and Their Antibacterial Behavior

Immobilization of poly-L-lysine brush<i> via</i> surface initiated polymerization for the development of long-term antibacterial coating for silicone catheter

Synthesis of a novel hydantoin-containing silane and its effect on the tracking and bacteria resistance of addition-cure liquid silicone rubber

Synthesis and Antibacterial Performance of Quaternary Phosphonium Salts with Reactive Hydroxyl Group

A Simple Preparation Route for Bio-Phenol MQ Silicone Resin via the Hydrosilylation Method and its Autonomic Antibacterial Property

Novel Amphiphilic Poly(Dimethylsiloxane) Based Polyurethane Networks Tethered with Carboxybetaine and Their Combined Antibacterial and Anti-Adhesive Property

Surface structures of PDMS incorporated with quaternary ammonium salts designed for antibiofouling and fouling release applications.

Quaternary Ammonium Salt-Based Intrinsic Antibacterial Polyurethanes: Optimizing the Antibacterial Activity via Cationic Main- or Side-Chain Design in Hard Segments

High Hydrophilic and Antibacterial Efficient UV−Curable Silicone−Containing Choline Chloride Quaternary Ammonium salts Functionalized Materials

One-pot synthesis of antibacterial monomers with dual biocidal modes

Construction of N-halamine Labeled Silica/zinc Oxide Hybrid Nanoparticles for Enhancing Antibacterial Ability of Ti Implants.

Tannic Acid Crosslinked Self-Healing and Reprocessable Silicone Elastomers with Improved Antibacterial and Flame Retardant Properties

Preparation of Gelatin-Quaternary Ammonium Salt Coating on Titanium Surface for Antibacterial/Osteogenic Properties