Abstract:To improve the water absorbency and water-retention rate of superabsorbent materials, a porous calcium carbonate composite superabsorbent polymer (PCC/PAA) was prepared by copolymerization of acrylic acid and porous calcium carbonate prepared from ground calcium carbonate. The results showed that the binding energies of C–O and C=O in the O 1s profile of PCC/PAA had 0.2 eV and 0.1–0.7 eV redshifts, respectively, and the bonding of –COO− groups on the surface of the porous calcium carbonate led to an increase in the binding energy of O 1s. Furthermore, the porous calcium carbonate chelates with the –COO− group in acrylic acid through the surface Ca2+ site to form multidirectional crosslinking points, which would increase the flexibility of the crosslinking network and promote the formation of pores inside the PCC/PAA to improve the water storage space. The water absorbency of PCC/PAA with 2 wt% porous calcium carbonate in deionized water and 0.9 wt% NaCl water solution increased from 540 g/g and 60 g/g to 935 g/g and 80 g/g, respectively. In addition, since the chemical crosslinker N,N′-methylene bisacrylamide is used in the polymerization process of PCC/PAA, N,N′-methylene bisacrylamide and porous calcium carbonate enhance the stability of the PCC/PAA crosslinking network by double-crosslinking with a polyacrylic acid chain, resulting in the crosslinking network of PCC/PAA not being destroyed after water absorption saturation. Therefore, PCC/PAA with 2 wt% porous calcium carbonate improved the water-retention rate by 244% after 5 h at 60 °C, and the compressive strength was approximately five-times that of the superabsorbent without porous calcium carbonate.

Preparation and Properties of Attapulgite/Brucite Fiber-Based Highly Absorbent Polymer Composite

Multiporous Microstructure for Enhancing the Water Absorption and Swelling Rate in Poly(sodium Acrylic Acid) Superabsorbent Hydrogels Based on a Novel Physical and Chemical Composite Foaming System

Absorption Properties of Silk Fibroin/Acrylic Acid/Acrylamide Composite Absorbent Material

Synthesis and Characterization of Silk Sericin/Acrylic Acid/Acrylamide Superabsorbent Polymer

Synthesis and characterization of silk fibroin/acrylic acid/acrylamide superabsorbent polymer

Synthesis and characterization of modified attapulgite/poly(aspartic acid) compound absorbent resin

Preparation and Morphology of High‐performance Exfoliated Poly(sodium Acrylate)/hydrotalcite Nanocomposite Superabsorbents

Preparation of Carboxymethyl Cellulose-g-Poly (acrylic Acid - 2-Acrylamido-2-methylpropane Sulfonic Acid)/Attapulgite Superabsorbent Composite

Preparation and Characterization of Poly(acrylic Acid-Co-acrylamide)/hydrotalcite Nanocomposite Superabsorbent

Studies on poly(acrylic acid)/attapulgite superabsorbent composite. I. Synthesis and characterization

Study on superabsorbent composite. III. Swelling behaviors of polyacrylamide/attapulgite composite based on acidified attapulgite and organo-attapulgite

Preparation and characterization of cellulose/attapulgite composite aerogels with high strength and hydrophobicity

Study on Superabsorbent Composite. Viii. Effects of Acid- and Heat-Activated Attapulgite on Water Absorbency of Polyacrylamide/Attapulgite

Preparation of Nanocomposite Superabsorbents Based on Hydrotalcite and Poly(acrylic-Co-acrylamide) by Inverse Suspension Polymerization

Synthesis and property of composite super absorbent polymer

Study on superabsorbent composite. XI. Effect of thermal treatment and acid activation of attapulgite on water absorbency of poly(acrylic acid)/attapulgite superabsorbent composite

Preparation and Characterisation of Phenolic Foam/Htab-Atp Nanocomposites

Preparation of a clay based superabsorbent polymer composite of copolymer poly(acrylate-co-acrylamide) with bentonite via microwave radiation

Preparation and adsorption property of attapulgite/carbon nanocomposite

Enhanced Water Absorbency and Water Retention Rate for Superabsorbent Polymer via Porous Calcium Carbonate Crosslinking

Effect of Dendrimer‐like PAMAM Grafted Attapulgite on the Microstructure and Morphology of Nylon‐6