Abstract:The current policy of managing high-level waste (HLW) derived in the closed nuclear fuel cycle consists in their vitrification into B-Si or Al-P vitreous forms. These compounds have rather limited capacity with respect to the HLW (5–20 wt%), and their properties change over time due to devitrification of the glasses. Cardinal improvement in the management of HLW can be achieved by their separation onto groups of elements with similar properties, followed by their immobilization in robust waste forms (matrices) and emplacement in deep disposal facilities. One of the possible fractions contains trivalent rare-earth elements (REEs) and minor actinides (MAs = Am and Cm). REEs are the fission products of actinides, which are mainly represented by stable isotopes of elements from La to Gd as well as Y. This group also contains small amounts of short-lived radionuclides with half-lives (T1/2) from 284 days (144Ce) to 90 years (151Sm), including 147Pm (T1/2 = 2.6 years), 154Eu (T1/2 = 8.8 years), and 155Eu (T1/2 = 5 years). However, the main long-term environmental hazard of the REE–MA fraction is associated with Am and Cm, with half-lives from 18 years (244Cm) to 8500 years (245Cm), and their daughter products: 237Np (T1/2 = 2.14 × 106 years), 239Pu (T1/2 = 2.41 × 104 years), 240Pu (T1/2 = 6537 years), and 242Pu (T1/2 = 3.76 × 105 years), which should be immobilized into a durable waste form that prevents their release into the environment. Due to the heat generated by decaying radionuclides, the temperature of matrices with an REE–MA fraction will be increased by hundreds of centigrade above ambient. This process can be utilized by selecting a vitreous waste form that will crystallize to form durable crystalline phases with long-lived radionuclides. We estimated the thermal effects in a potential REE–MA glass composite material based on the size of the block, the content of waste, the time of storage before immobilization and after disposal, and showed that it is possible to select the waste loading, size of blocks, and storage time so that the temperature of the matrix during the first decades will reach 500–700 °C, which corresponds to the optimal range of glass crystallization. As a result, a glass–ceramic composite will be produced that contains monazite ((REE,MA)PO4) in phosphate glasses; britholite (Cax(REE,MA)10-x(SiO4)6O2) or zirconolite ((Ca,REE,MA)(Zr,REE,MA)(Ti,Al,Fe)2O7), in silicate systems. This possibility is confirmed by experimental data on the crystallization of glasses with REEs and actinides (Pu, Am). The prospect for the disposal of glasses with the REE–MA fraction in deep boreholes is briefly considered.

A review of brannerite structured materials for nuclear waste management

Current advances on titanate glass-ceramic composite materials as waste forms for actinide immobilization: A technical review

Ceramic Mineral Waste-Forms for Nuclear Waste Immobilization

Ceramic–Metal (Cermet) Composites: A Review of Key Properties and Synthesis Methods Focused on Nuclear Waste Immobilization

Advancements in immobilization of cesium and strontium radionuclides in cementitious wasteforms—A review

Recent advances in immobilization of radioactive cesium and strontium-bearing wastes in alkali activated materials - A review

Ceramics for high level radioactive waste solidification

Insight into γ-Irradiation-Induced Structure Evolution of Uranium(IV) Germanates as Crystalline Nuclear Waste Forms

Thermal Effects and Glass Crystallization in Composite Matrices for Immobilization of the Rare-Earth Element–Minor Actinide Fraction of High-Level Radioactive Waste

Alpha-particle Irradiation Effects on Uranium-Bearing Gd 2 Zr 2 O 7 Ceramics for Nuclear Waste Forms

Modeling of Nuclear Waste Forms: State-of-the-Art and Perspectives

Sodium zirconium phosphate‐based glass‐ceramics as potential wasteforms for the immobilization of nuclear wastes

Immobilize Nd2O3 as simulated nuclear waste in silicate-apatite glass-ceramics

Solidification performance and mechanism of typical radioactive nuclear waste by geopolymers and geopolymer ceramics: A review

The Advancement of Neutron Shielding Materials for the Storage of Spent Nuclear Fuel

High-entropy A2B2O7-type oxide ceramics: A potential immobilising matrix for high-level radioactive waste

Probing into the optimum preparation and the chemical durability of Sr0.5Zr2(PO4)3-SmPO4 dual-phase ceramics for nuclear waste forms via in-situ synthesis

Self-sealing behavior of bentonite-based materials in high-level radioactive waste disposal: A systematic review

Review of biomass-based materials for uranium adsorption

Insight into Immobilization Mechanism of Nuclear Waste Management by Granite: Impact of Waste Chemical Species

Zirconia/garnet multi‐phase ceramics with high immobilization capacity for Nd confers better physical and chemical stability