Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Fatigue life prediction method for reinforced concrete deck slabs subjected to repeated moving wheel loads and failing in shear

A Multi-Level Structural Assessment Strategy for Analysis of RC Bridge Deck Slabs

Shear Capacity of an Existing RC Bridge Deck Slab: FE Analysis Using Continuum Elements

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Investigation of the Fatigue Stress of Orthotropic Steel Decks Based on an Arch Bridge with the Application of the Arlequin Method

Field Destructive Testing of a Reinforced Concrete Bridge Deck Slab

Shear Capacity of a RC Bridge Deck Slab: Comparison Between Multilevel Assessment and Field Test

Punching/Shear Strength of a Full-scale Tested Bridge Deck Slab

A Multi-Level Structural Assessment Strategy for Reinforced Concrete Bridge Deck Slabs

Pseudo-cracking approach to fatigue life assessment of rc bridge decks in service

Three-Dimensional Fatigue Simulation of RC Slabs under Traveling Wheel-Type Loads

Numerical Analysis of High and Low‐cycle Flexural Fatigue for Reinforced Concrete Beams under Full‐range of Varying Amplitudes

Experimental investigation of fatigue behavior of UHPFRC – RC composite deck slabs subjected to moving wheel loading

Fatigue Life Prediction for Orthotropic Steel Deck Details with a Nonlinear Accumulative Damage Model under Pavement Temperature and Traffic Loading

Residual Fatigue Life Assessment of Damaged RC Bridge Slabs Based on Site-Inspection for Cracking: A Quantitative Discussion

Data-based Models for Fatigue Reliability Assessment and Life Prediction of Orthotropic Steel Deck Details Considering Pavement Temperature and Traffic Loads

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

ESS-based Probabilistic Fatigue Life Assessment of Steel Bridges: Methodology, Numerical Simulation and Application

Fatigue Reliability Analysis of a Suspension Bridge Using Long-Term Monitoring Data

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Vibration-Induced Probabilistic Fatigue Life Assessment of A Suspension Bridge Carrying Both Railway and Highway Traffic