ZIF-67 Anchored on MoS2/rGO Heterostructure for Non-Enzymatic and Visible-Light-Sensitive Photoelectrochemical Biosensing

Qiaolin Fan,Xiao Li,Hui Dong,Zhonghua Ni,Tao Hu
DOI: https://doi.org/10.3390/bios14010038
2024-01-13
Biosensors
Abstract:Graphene and graphene-like two-dimensional layered nanomaterials-based photoelectrochemical (PEC) biosensors have recently grown rapidly in popularity thanks to their advantages of high sensitivity and low background signal, which have attracted tremendous attention in ultrahigh sensitive small molecule detection. This work proposes a non-enzymatic and visible-light-sensitive PEC biosensing platform based on ZIF-67@MoS2/rGO composite which is synthesized through a facile and one-step microwave-assisted hydrothermal method. The combination of MoS2 and rGO could construct van der Waals heterostructures, which not only act as visible-light-active nanomaterials, but facilitate charge carriers transfer between the photoelectrode and glassy carbon electrode (GCE). ZIF-67 anchored on MoS2/rGO heterostructures provides large specific surface areas and a high proportion of catalytic sites, which cooperate with MoS2 nanosheets, realizing rapid and efficient enzyme-free electrocatalytic oxidation of glucose. The ZIF-67@MoS2/rGO-modified GCE can realize the rapid and sensitive detection of glucose at low detection voltage, which exhibits a high sensitivity of 12.62 μAmM−1cm−2. Finally, the ZIF-67@MoS2/rGO PEC biosensor is developed by integrating the ZIF-67@MoS2/rGO with a screen-printed electrode (SPE), which exhibits a high sensitivity of 3.479 μAmM−1cm−2 and a low detection limit of 1.39 μM. The biosensor's selectivity, stability, and repeatability are systematically investigated, and its practicability is evaluated by detecting clinical serum samples.
chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation
What problem does this paper attempt to address?
The main problem this paper attempts to address is the development of an efficient, sensitive, and stable non-enzymatic visible light-sensitive photoelectrochemical (PEC) biosensor for glucose detection. Specifically, the researchers synthesized a composite material by anchoring ZIF-67 onto a MoS₂/rGO heterostructure and applied it to a photoelectrochemical biosensing platform. This material combines the advantages of MoS₂ and rGO, not only enhancing the absorption capacity of visible light but also promoting the transfer of charge carriers, thereby achieving rapid and efficient non-enzymatic electrocatalytic oxidation of glucose. Additionally, the researchers further developed a portable PEC glucose biosensor by integrating this composite material onto a screen-printed electrode (SPE), demonstrating its potential for practical applications. ### Main Problems: 1. **Improving the sensitivity and stability of photoelectrochemical sensors**: Traditional glucose sensors suffer from low sensitivity, high background signals, and susceptibility to environmental factors. This study aims to improve the sensitivity and stability of the sensor by designing and synthesizing novel composite materials. 2. **Achieving non-enzymatic catalysis**: Although traditional enzyme-based sensors have high sensitivity, enzymes are prone to denaturation and are significantly affected by environmental factors such as temperature and pH. This study achieves non-enzymatic glucose detection by introducing the metal-organic framework (MOFs) material ZIF-67, avoiding the instability and limitations of enzymes. 3. **Enhancing visible light response performance**: Traditional semiconductor materials such as ZnO and TiO₂ have poor visible light absorption due to their wide band gaps. This study enhances the material's visible light absorption capacity and charge transfer efficiency by constructing a MoS₂/rGO heterostructure, thereby enhancing the photocurrent response. ### Solutions: 1. **Material Synthesis**: The ZIF-67@MoS₂/rGO composite material was synthesized in one step using a microwave-assisted hydrothermal method. This method is efficient, simple to operate, and low-cost. 2. **Material Characterization**: The successful synthesis and unique hierarchical geometric structure of the composite material were verified using SEM, XRD, and Raman spectroscopy. 3. **Photoelectrochemical Performance Testing**: The excellent performance of the ZIF-67@MoS₂/rGO composite material in glucose detection was verified by systematically optimizing experimental conditions such as detection potential, light source intensity, and electrolyte pH using methods like chronoamperometry. 4. **Practical Application**: The ZIF-67@MoS₂/rGO composite material was integrated onto a screen-printed electrode (SPE) to develop a portable PEC glucose biosensor. Its feasibility and reliability in practical applications were verified by detecting clinical serum samples. In summary, this study successfully developed an efficient, sensitive, and stable non-enzymatic visible light-sensitive photoelectrochemical glucose biosensor through innovative material design and synthesis methods, providing new ideas and technical support for future biomedical detection.