Abstract:In recent years, studies conducted on foam stabilization have focused on nanoparticles by generating strong adsorption at the interface to stabilize the foam under harsh reservoir conditions. Meanwhile, the selection of a gas source is also of great importance for foam performance. In this study, a mixed system of surfactants was selected, and the foamability and foam stability of nitrogen and methane were evaluated according to the improved jet method. After adding modified SiO<sub>2</sub> nanoparticles, the foam-related parameters were analyzed. The plugging abilities of the different foams were compared through core-flooding experiments, and the oil displacement effects of the different foams were compared through microfluidic experiments. The results show that the amphoteric surfactant betaine has an excellent synergistic effect on the anionic surfactant SDS. The methane foam produced using the jet method has a larger initial volume than the nitrogen foam, but its stability is poor. The half-life of the nitrogen foam is about two times that of the methane foam. After adding 1.0 wt % SiO<sub>2</sub> nanoparticles to the surfactant solution, the viscosity and stability of the formed foam improve. However, the maximum viscosity of the surfactant nanoparticle foam (surfactant-NP foam) is 53 mPa·s higher than that of the surfactant foam. In the core-flooding experiment, the plugging performance of the methane foam was worse than that of the nitrogen foam, and in the microfluidic experiment, the oil displacement abilities of the methane foam and the nitrogen foam were similar. The plugging performance and the oil displacement effect of the foam are greatly improved by adding nanoparticles. The surfactant-NP foam flooding has a better oil displacement effect and can enhance the recovery factor by more than 30%. Under actual high-pressure reservoir conditions, although the stability of the methane foam is weaker than that of the nitrogen foam, some methane may be dissolved in the crude oil to decrease the viscosity after the foam collapses, which leads to the methane foam being the preferred method in oilfields.This article has not yet been cited by other publications.

Stabilization and performance of a novel viscoelastic N2 foam for enhanced oil recovery

Preparation and rheological properties of a stable aqueous foam system

Anionic–zwitterionic viscoelastic surfactant strengthened air foams for heterogeneous reservoirs

Modified silica nanoparticles stabilized foam for enhanced oil recovery

Investigation on the Stability of Janus SiO 2 - n Nanoparticle-Assisted Nonionic Surfactant-Stabilized Foam and Its Application in Enhanced Oil Recovery

Experimental Investigation of Nanolaponite Stabilized Nitrogen Foam for Enhanced Oil Recovery

N 2 Foam Flooding Combined with Gel Plugging for Enhanced Oil Recovery in High-Temperature Reservoirs: Laboratory Experiments and Numerical Simulations

Investigation of the Effect of Nanoparticle-Stabilized Foam on EOR: Nitrogen Foam and Methane Foam

Enhancement on Stability of Oil-Displacement Foam by Palygorskite Nanoparticles

Nano-stabilized foam for enhanced oil recovery using green nanocomposites and anionic surfactants: An experimental study

Gas-liquid surface characterization and liquid film thinning of Non-Aqueous foam

A Novel Foam Flooding for Enhanced Oil Recovery in Fractured Low-Permeability Reservoirs: Performance Evaluation and Mechanism Study

Utilization of Surfactant-Stabilized Foam for Enhanced Oil Recovery by Adding Nanoparticles

Nanoparticle-reinforced foam system for enhanced oil recovery (EOR): Mechanistic review and perspective

Evaluation of the Performances of Foam System as an Agent of Enhancing Oil Recovery

Experimental investigations of enhanced oil recovery using porous SiO2 aerogel nanosuspensions with emulsifying effects

Experimental Study on the Mechanism of Nitrogen Foam to Improve the Recovery of Bottom-Water Heavy Oil Reservoir

A Novel Supercritical CO2 Foam System Stabilized With a Mixture of Zwitterionic Surfactant and Silica Nanoparticles for Enhanced Oil Recovery

Highly viscous liquid foam for oil-displacement: Surface & phase behavior enhancement

Research on EOR for ultralow interfacial tension foam in high-temperature and high-salinity reservoirs: flooding simulation and application in Shengli Oilfield

Displacement characteristics of worm-like micelle CO2 foam and treatment of produced liquid