Abstract:The renovation wave calls for an integrated, participatory, and neighbourhood to neighbourhood approach tailored to the local environments. This can be hindered by the lack of geometric and performance input data about the existing building stock. A parametric digital urban building energy modelling (UBEM) tool was developed for local municipalities to automate calculations for comprehensive renovation strategies utilizing public databases specifically at the neighbourhood level. This article compares the accuracy of two energy performance calculation models (seasonal heat balance method and hourly resistance–capacitance method) used within the tool to detailed energy simulation software and measured energy consumption data of existing group of residential buildings in a same neighbourhood. The accuracy for estimating the total primary energy demand was roughly below 10 % for both simplified models. The seasonal calculation method showed consistent overestimation of space heating, depending on building characteristics. Solar and internal heat gains significantly affect the accuracy of simplified heat balance calculations, particularly in well-insulated buildings, while the more detailed 5R1C lumped capacitance hourly method provides improved accuracy for space heating demand. The comparison of uniform (proportional) and project based window area distribution used in the calculation models showed only marginal difference. The study validated simple seasonal and 5R1C hourly calculation methods using data from an apartment building neighbourhood with 22 apartment buildings. Despite larger deviations in the case of individual buildings, the average deviation from measured heating demand was only around 3 %, the seasonal method slightly overestimating and the 5R1C hourly method slightly underestimating the measured values. The primary energy demand including typical values of domestic hot water and household electricity was overestimated by both simplified methods due to lower electricity and water consumption in reality although the difference was below 7 % for the entire district. This concludes that pooling the building envelope heat loss calculation on a district level improves accuracy on average allowing better assessment of comparative renovation strategies.

The Analysis and Validation of the Measured Heating Energy Consumption of a Single-Family Residential Passive House in Lithuania

Energy Efficiency For Airtightness And Exterior Wall Insulation Of Passive Houses In Hot Summer And Cold Winter Zone Of China

Maintenance of Passive House Standard in the Light of Long-Term Study on Energy Use in a Prefabricated Lightweight Passive House in Central Europe

Techno-Economic Analysis of the Heating System Robustness

Quantifying the Enhanced Performance of Multifamily Residential Passive House over Conventional Buildings in Terms of Energy Use

Feasibility analysis of retrofitting existing residential towards the EnerPHit standard in HSCW zone: A case study in Guilin, China

Statistical Analysis of the Variability of Energy Efficiency Indicators for a Multi-Family Residential Building

An energy analysis methodology for residential heat pump retrofits

Assessment of an Integrated Active Solar and Air-Source Heat Pump Water Heating System Operated Within A Passive House in A Cold Climate Zone

Dynamic Energy Analysis of Different Heat Pump Heating Systems Exploiting Renewable Energy Sources

Applying the passive house concept to a social housing project in Austria – evaluation of the indoor environment based on long-term measurements and user surveys

A review of the 1-2 apartment residential building stock in Lithuania based on an analysis of Energy Performance Certificates

A Review of Heat Pump Systems and Applications in Cold Climates: Evidence from Lithuania

Long-Term Performance Measurement and Analysis of a Small-Scale Ground Source Heat Pump System

Energy Analysis and Cost-Effective Design Solutions for a Dual-Source Heat Pump System in Representative Climates in Europe

Evaluating the performance of six 1970s off-gas deep retrofit bungalows

Passive and active performance assessment of building integrated hybrid solar photovoltaic/thermal collector prototypes: Energy, comfort, and economic analyses

Performance Assessment of a Building Integrated Photovoltaic Thermal System in Mediterranean Climate—A Numerical Simulation Approach

Hybrid Heat Pump Performance Evaluation in Different Operation Modes for Single-Family House

EVALUATION OF THE ENERGY EFFICIENCY OF HEAT SUPPLY SYSTEMS OF A RESIDENTIAL BUILDING WITH HEAT PUMPS BASED ON COMPUTER SIMULATION

Comparative assessment of simple and detailed energy performance models for urban energy modelling based on digital twin and statistical typology database for the renovation of existing building stock