Abstract:Traditional prediction of erosion focuses on the use of velocity and impact angle of particles as independent variables in analytically derived models. This approach is most suitable for numerical predictions of erosion in disperse flow fields where particle trajectories may easily be followed prior to impact. For dense particle flows, the prediction of individual particle or particle cluster movement is nearly never attempted by following trajectories. Instead, two-fluid Eulerian–Eulerian approaches are used in which a continuous particle fluid phase is considered.The present study shows that the impact velocity and angle of attack of particles at the eroding surface are difficult to obtain for dense flows, thus being difficult to consider as parameters for predicting erosion. Instead, it is proposed that the normal and the shearing components of the viscous dissipation of the particulate phase are more suitable as independent flow variables governing the erosion process. These variables describe deformation and cutting wear processes, respectively, and are readily derived from the flow field.Eulerian erosion models are proposed, based on these independent variables. It is possible to implement previous results and theories concerning the material–mechanical interaction between the abrasive and an eroding surface to achieve model improvements. In this work, only a simple model taking into account a threshold elastic strain limit is proposed, to more correctly model the deformation wear.The particle-flow boundary condition — a partial-slip condition — significantly influences the erosion process, particularly the cutting erosion. The boundary condition depends on parameters such as the local particle phase flow, the mean diameter and the sharpness of the abrasive as well as the surface roughness.A simple 2D test application — a jet stream of particles impinging a tilted plate — is presented, and the qualitative angular behaviour of ductile and brittle erosion is reproduced at the target position. A scheme is presented for determination of material constants and suitable boundary conditions to be used in the proposed erosion models.

Erosive Wear Caused by Large Solid Particles Carried by a Flowing Liquid: A Comprehensive Review

Visualization and Influence Factors of Erosion at the Working Edge of a Hydraulic Servo Spool Valve

Current Situation and Prospect of Erosion Wear

A comprehensive review on the flow characteristics and erosion wear of the various multi-phase flow handling equipment

Research on Synergistic Erosion by Cavitation and Sediment: A Review

An Impact Energy Erosion Model with an Energy Allocation Rule for the Discrete Element Method

An Erosion Model for the Discrete Element Method

A Coupled Finite Element and Meshfree Analysis of Erosive Wear

Erosive Wear Mechanism of Metal Materials Used in Hydraulic Machines

Finite Element Model of Erosive Wear on Ductile and Brittle Materials

Review on computational fluid dynamics based analysis of surface erosion in hydraulic machinery

An improved model for predicting the erosion within the DEM framework

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Computational Methods of Erosion Wear in Centrifugal Pump: A State-of-the-Art Review

Fluid dynamic mechanisms of particle flow causing ductile and brittle erosion

Multi-Scale Simulation of Fluid-Structure Interaction Induced Erosion on the Pipe Surface

Research on the solid particle erosion wear of pipe steel for hydraulic fracturing based on experiments and numerical simulations

Investigation into the erosion damage mechanism of High-Temperature, High-Pressure, and High-Speed gasflow on metal surfaces

Influence of Some Key Parameters on Erosion Rate for Composite Materials

An Improved Eulerian-Lagrangian Method Combined with Ductile Material Model for Cavitation Erosion Assessment

Erosion Characterization Of Gas-Solid Jets Impinging Onto Inclined Surfaces