Abstract:Utilising cooling stimulation as a thermal excitation means has demonstrated profound capabilities of detecting sub-surface metal loss using thermography. Previously, a prototype mechanism was introduced which accommodates a thermal camera and cooling source and operates in a reciprocating motion scanning the test piece while cold stimulation is in operation. Immediately after that, the camera registers the thermal evolution. However, thermal reflections, non-uniform stimulation and lateral heat diffusions will remain as undesirable phenomena preventing the effective observation of sub-surface defects. This becomes more challenging when there is no prior knowledge of the non-defective area in order to effectively distinguish between defective and non-defective areas. In this work, the previously automated acquisition and processing pipeline is re-designed and optimised for two purposes: 1-Through the previous work, the mentioned pipeline was used to analyse a specific area of the test piece surface in order to reconstruct the reference area and identify defects. In order to expand the application of this device over the entire test area, regardless of its extension, the pipeline is improved in which the final surface image is reconstructed by taking into account multiple segments of the test surface. The previously introduced pre-processing method of Dynamic Reference Reconstruction (DRR) is enhanced by using a more rigorous thresholding procedure. Principal Component Analysis (PCA) is then used in order for feature (DRR images) reduction. 2-The results of PCA on multiple segment images of the test surface revealed different ranges of intensities across each segment image. This potentially could cause mistaken interpretation of the defective and non-defective areas. An automated segmentation method based on Gaussian Mixture Model (GMM) is used to assist the expert user in more effective detection of the defective areas when the non-defective areas are uniformly characterised as background. The final results of GMM have shown not only the capability of accurately detecting subsurface metal loss as low as 37.5% but also the successful detection of defects that were either unidentifiable or invisible in either the original thermal images or their PCA transformed results.

A Semi-empiric Compensation Model for Defect Segmentation in Ultrasonic Thermographic Inspection of Coatings Based on a Chebyshev Series

Research on Internal Defect Detection of Epoxy Glass Fiber Composites Based on Terahertz Imaging Technology

A Model-Based Regularized Inverse Method for Ultrasonic B-scan Image Reconstruction

Design and Testing of a Micro Thermal Sensor for Non-Contact Surface Defect Detection.

The Study on Thermal State Error Compensation for a High-precision Displacement Measurement System

Exact Localization of Debonding Defects in Thermal Barrier Coatings

Quantitative Characterization of Interfacial Defects in Thermal Barrier Coatings by Long Pulse Thermography

Automatic Extraction of Material Defect Size by Infrared Image Sequence

Experimental investigation on detection of coating debonds in thermal barrier coatings using vibrothermography with a piezoceramic actuator

Visual Defect Recognition and Location for Pulsed Thermography Images Based on Defect-background Contrast Analysis

A Novel Methodology to Predict 3-D Surface Temperature Field on Delamination for Thermography

Thermography Sequence Processing and Defect Edge Identification of TBC Structure Debonding Defects Detection Using Long-Pulsed Infrared Wave Non-Destructive Testing Technology

Numerical Analysis of the Measuring Errors in Quantitative Detection of Defects with Shearing Speckle Pattern Interferometry

Ultrasonic Phased Array Imaging Approach Using Omni-Directional Velocity Correction for Quantitative Evaluation of Delamination in Composite Structure

High fidelity ultrasonic measurements for defect detection and characterization

Gapped Smoothing Algorithm Applied to Defect Identification Using Pulsed Thermography

Segment Anything in Defect Detection

Numerical study of thermomechanical delamination mechanisms in segmented high-temperature coatings

Infrared thermal wave detection of interfacial debonding defects of thermal barrier coatings based on non-linear frequency modulation

Non‐destructive testing method of micro‐debonding defects in composite insulation based on high power ultrasonic

An Automated Pipeline for Dynamic Detection of Sub-Surface Metal Loss Defects across Cold Thermography Images