Abstract:Safety and high energy density have long restricted the large-scale practical application of lithium metal batteries because of the unbridled growth of lithium dendrites and the rapid deteriorating cycle performance of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode. Herein, an additive of RbNO3 with multiple functions is proposed for dendrite-free NCM811 lithium metal batteries. Benefiting from the electrostatic shielding effect formed by Rb+ during the Li+ deposition process and the solvation effect of NO3– to regulate lithium deposition, a high Coulombic efficiency of 95.02% (compared with the low Coulombic efficiency of 89.37% in the blank electrolyte) is acquired in Li//Cu cells, and the uniform growth of the lithium metal deposition with a large strawberry-like morphology is achieved. Moreover, when a cathode of NCM811 matches with a lithium metal anode, an extraordinary capacity retention of 93.67% after 200 cycles with a high Coulombic efficiency of 99.7% in the electrolyte with the RbNO3 system (a capacity retention of 80.1% with a Coulombic efficiency of 98.0% for the blank electrolyte) is achieved at 1C. This work provides guidance for the development of high-efficiency additives with dual synergistic regulation effects of anions and cations for lithium metal batteries in the future.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14290.Li//Cu test with concentration gradient additives; EIS plots; linear sweep voltammetry (LSV) curves; the schematic diagram of an equivalent fitting circuit; MD simulations of the N(r) function; SEM image of deposition of the lithium metal; XPS results of the copper surface; capacity–voltage curve; comparison of the Coulombic efficiency in cycle performance; XRD patterns of the NCM811 electrode; the comparison of the atomic percentage for the elements of the NCM811 electrode; and the detailed values of resistance of cells (PDF)This article has not yet been cited by other publications.

Two-in-one strategy: Discretely functionalized electrolyte additive for stable lithium metal batteries coupled with Ni-rich cathode

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Multifunctional Electrolyte Additive Stabilizes Electrode–Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

Synchronously Stabilizing the Interphase of Cathode and Anode Enabling Lithium Metal Batteries via Multiple Electrolyte Additives

Dual‐Salt Electrolyte with Synergistic Effect for Lithium Metal Batteries with Prolonging Cyclic Performance

Active Diluent‐Anion Synergy Strategy Regulating Nonflammable Electrolytes for High‐Efficiency Li Metal Batteries

A gradient solid electrolyte interphase with high Li+ conductivity induced by bisfluoroacetamide additive for stable lithium metal batteries

N-Fluorobenzenesulfonimide as a multifunctional electrolyte additive for co-stabilizing dual-electrodes of lithium metal batteries with enhanced electrochemical performance

High-performance Li/LiNi0.8Co0.1Mn0.1O2 batteries enabled by optimizing carbonate-based electrolyte and electrode interphases via triallylamine additive

Enhancing High‐Voltage LNMO Cathode Performance in Li‐Metal Batteries Via Anionic Electrolyte Additive‐Integrated CEI Engineering

Multifunctional High-Efficiency Additive with Synergistic Anion and Cation Coordination for High-Performance LiNi0.8Co0.1Mn0.1O2 Lithium Metal Batteries.

Additives strategies to improving cycling stability of Li metal batteries by modifying electrode electrolyte interphases

Dual Additives for Stabilizing Li Deposition and SEI Formation in Anode‐Free Li‐Metal Batteries

Acceleration of interfacial kinetics induced by regulation of Li + desolvation process in lithium metal-based batteries

Synergistic Dual‐Additive Electrolyte Enables Practical Lithium‐Metal Batteries

Compositionally Sequenced Interfacial Layers for High‐Energy Li‐Metal Batteries

Multifunctional High-Efficiency Additive with Synergistic Anion and Cation Coordination for High-Performance LiNi 0.8 Co 0.1 Mn 0.1 O 2 Lithium Metal Batteries

Simultaneous modulation of cathode/anode and electrolyte interfaces via a nitrile additive for high-energy-density lithium-metal batteries

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive