Fabrication of Poly(Lactic Acid)@TiO2 Electrospun Membrane Decorated with Metal–Organic Frameworks for Efficient Air Filtration and Bacteriostasis

Minggang Lin,Jinlin Shen,Qiaonan Qian,Tan Li,Chuyang Zhang,Huan Qi

DOI: https://doi.org/10.3390/polym16070889

IF: 5

2024-03-25

Polymers

Abstract:The development of high-performance filtration materials is essential for the effective removal of airborne particles, and metal–organic frameworks (MOFs) anchored to organic polymer matrices are considered to be one of the most promising porous adsorbents for air pollutants. Nowadays, most air filters are generally based on synthetic fiber polymers derived from petroleum residues and have limited functionality, so the use of MOFs in combination with nanofiber air filters has received a lot of attention. Here, a conjugated electrostatic spinning method is demonstrated for the one-step preparation of poly(lactic acid) (PLA) nanofibrous membranes with a bimodal diameter distribution and the anchoring of Zeolitic Imidazolate Framework-8 (ZIF-8) by the introduction of TiO2 and in situ generation to construct favorable multiscale fibers and rough structures. The prepared PLA/TZ maintained a good PM2.5 capture efficiency of 99.97%, a filtration efficiency of 96.43% for PM0.3, and a pressure drop of 96.0 Pa, with the highest quality factor being 0.08449 Pa−1. Additionally, ZIF-8 was uniformly generated on the surface of PLA and TiO2 nanofibers, obtaining a roughened structure and a larger specific surface area. An enhanced filtration retention effect and electrostatic interactions, as well as active free radicals, can be generated for the deep inactivation of bacteria. Compared with the unmodified membrane, PLA/TZ prepared antibacterial characteristics induced by photocatalysis and Zn2+ release, with excellent bactericidal effects against S. aureus and E. coli. Overall, this work may provide a promising approach for the development of efficient biomass-based filtration materials with antimicrobial properties.

polymer science

What problem does this paper attempt to address?

The main problem this paper attempts to address is the development of an efficient, eco-friendly, and antibacterial air filtration material. Specifically, the researchers prepared polylactic acid (PLA)@titanium dioxide (TiO₂) nanofiber membranes through electrospinning technology and in situ generated zeolitic imidazolate framework-8 (ZIF-8) on their surface to enhance the air filtration efficiency and antibacterial properties of the material.

### Main Issues:
1. **Efficient Air Filtration**: Existing air filtration materials are typically based on petroleum-derived synthetic fiber polymers, which have limited functionality, especially in filtering fine particles (such as PM0.3 and PM2.5). Therefore, new filtration materials need to be developed to improve filtration efficiency and reduce pressure drop.
2. **Antibacterial Properties**: Traditional filtration materials mainly act as physical barriers and lack antibacterial functions. During use, these materials are easily contaminated by harmful microorganisms, leading to secondary transmission. Therefore, it is necessary to develop filtration materials with antibacterial properties to enhance their application potential in medical and high-efficiency air filtration.
3. **Environmental Friendliness**: Traditional polymer materials are difficult to degrade after use, posing an environmental burden. Therefore, biodegradable filtration materials need to be developed to reduce environmental pollution.

### Solutions:
- **Material Selection**: Use polylactic acid (PLA) as the base material, which is biodegradable and can decompose into carbon dioxide and water, making it environmentally friendly.
- **Nanocomposite Materials**: By introducing titanium dioxide (TiO₂) and ZIF-8 nanoparticles, the surface roughness and porous structure of the material are enhanced, thereby improving filtration efficiency and antibacterial properties.
- **Electrospinning Technology**: Utilize conjugate electrospinning technology to prepare nanofiber membranes with bimodal diameter distribution, improving filtration performance and significantly reducing resistance.

### Experimental Results:
- **Filtration Performance**: The prepared PLA/TZ membrane achieved a PM2.5 capture efficiency of 99.97%, a PM0.3 filtration efficiency of 96.43%, a pressure drop of 96.0 Pa, and a maximum quality factor of 0.08449 Pa⁻¹.
- **Antibacterial Properties**: The PLA/TZ membrane exhibited excellent antibacterial effects through photocatalysis and Zn²⁺ release, showing good bactericidal action against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli).
- **Characterization Analysis**: Through scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), the successful loading and uniform distribution of TiO₂ and ZIF-8 nanoparticles were confirmed.

In summary, this study provides a promising approach for developing efficient biomass-based filtration materials with excellent air filtration and antibacterial properties.