Abstract:The cyclonic microbubble flotation column is an efficient separation equipment in the beneficiation process of metallic and non-metallic minerals. However, the higher detachment rate of coarse particles in the pulp, pulp-froth interfacial zone, and froth zone is an issue that needs to be addressed urgently in column flotation. Compared with traditional air-water bubbles, oily bubbles have higher hydrophobicity, which is beneficial for strengthening the bubble-particle attachment and inhibiting the bubble-particle detachment. Therefore, oily bubbles were introduced into the cyclonic microbubble flotation column to reduce the particle detachment rate. Firstly, an improved cyclonic microbubble flotation column was set up, and traditional air-water bubbles were placed by oily bubbles through the combined use of an atomizer and a bubble generator during experiments. Subsequently, we investigated the feasibility of using oily bubbles as a flotation carrier to regulate the particle detachment rate, improve the particle recovery, and explore the mechanism behind this. Column flotation results showed that recovery rates generated from experiments with oily bubbles are higher than those with air-water bubbles under different operation conditions, and the particle detachment rate in the interfacial region was significantly reduced with the use of oily bubbles. Recoveries and flotation rate constants generated from collection zones for each particle size range indicated that the use of oily bubbles can increase the upper limit of flotation particle size compared with the use of air-water bubbles. Calculated detachment rates showed that the use of oily bubbles can effectively reduce the detachment probability of particles with different sizes in the collection zone. Combined with the observation of ultrasonic-assisted oscillation, it is proved that the oil coating film on the oily bubble significantly improves the resistance of oily bubbles to turbulent disturbance. In addition, the increase in hydrophobic force between oily bubbles and particles and the growth of the three-phase contact periphery are beneficial to reducing the particle detachment probability due to turbulent disturbance in the collection zone. Results from bubble coalescence experiments showed that the existence of oily bubbles significantly reduced bubble coalescence time and increased the damping coefficient. Compared with air-water bubbles, oily bubbles have a stronger damping effect on the oscillation caused by bubble coalescence, inhibiting the violent bubble surface deformation and the induced particle detachment during bubble coalescence. Therefore, the introduction of oily bubbles is a promising idea to reduce the detachment probability of coarse particles and increase the upper limit of particle size in column flotation.

Effect of surface pore on bubble–solid surface collisional interaction and adhesion process

Molecular-level study of hydrophobic interactions during low-rank coal particle-bubble attachment

Molecular Dynamics Simulation Study of Bubble Attachment at the Coal Surface with Varying Coalification Degrees

Influence of oil film on the interaction between bubble and bubble/lignite particle

Effect of surfactant on the attachment between coal particles and bubbles: An experimental and molecular dynamics simulation study

A mechanism for the stable adhesion of bubbles and particles: The effect of particle surface properties

Detachment of a particle from the surface of a bubble colliding with a solid surface

A novel method for evaluating the hydrophobic interaction between coal particles and air bubbles and its role in flotation

Study on the Dynamic Process of the Attachment of a Single Bubble to Rough Surfaces with Different Hydrophobicity

Synergistic Adsorption Mechanism of Anionic and Cationic Surfactant Mixtures on Low-Rank Coal Flotation

Understanding the role of kerosene on the coal particle and bubble attachment process

Parameters of Collision and Adhesion Process Between a Rising Bubble and Quartz in Long-Chain Amine Solution and Their Correlation with Flotation

Microscopic spreading characteristics of non-polar oil droplet on low rank coal surface: Effects of surfactant pretreatment and oxygen-containing groups

Study on the effects of surfactants on the interface characteristics and wettability of lignite

Effect of Particle Size and Hydrophobicity on Bubble-Particle Collision Detachment at the Slurry-Foam Phase Interface

Effect of Froth on the Interaction Between Coal Particles and Cake Structures in the Dewatering Process of Clean Coal

Study on inhibition mechanisms of detachment of coal particles from oily bubbles in flotation column

A microscopic mechanism study of the effect of binary surfactants on the flotation of Wiser bituminous coal

Effect of oily bubbles on the detachment behavior between bubbles and coarse particles

Effect of bio-based surfactant on wettability of low-rank coal surface and its mechanism

Enhancement in kerosene droplet–coal particle collision and adsorption by bubble trailing vortex in coal slurry conditioning: Energy evolution of collision process