Abstract:In order to compensate for the hemispherical resonator gyroscope (HRG) dynamic output drift errors, a novel compensation method is presented. Through deriving the resonator motion equations and analyzing the mechanism of HRG dynamic output drift errors, it is found that the resonator defect nonuniformity is the main cause of the HRG dynamic output errors. By analyzing the mechanisms of these errors, the influence of these error sources is interacted and coupled, and it is difficult to analyze the HRG output error mechanism and establish an error model comprehensively. We proposed a compensation prediction model for the HRG dynamic output to suppress the influence of these errors comprehensively. To establish the high-precision HRG dynamic output compensation model, we proposed an improved variational mode decomposition (VMD) method to achieve an accurate HRG output. First, we used VMD to decompose the HRG output, and the optimal VMD decomposition parameters are achieved by a genetic algorithm. In order to better achieve the effective information, the decomposed components of HRG drift are classified using the sample entropy. Then, the mixed components are further processed using time–frequency peak filtering. Finally, the accurate HRG output is achieved by reconstructing all the effective components. The accurate HRG output is used to construct the training set, and the high-precision HRG dynamic output prediction model is established by long short-term memory (LSTM). The software compensation of the HRG dynamic output drift is realized by the prediction model. The experiment shows that the HRG dynamic output drift is mainly produced by the resonator nonuniformity, and it is strongly correlated with the standing wave azimuth, which verifies the correctness of the mechanism analysis. The HRG dynamic drift peak-to-peak value decreases to $5.715\times 10^{-3 \circ }$ /s, which verifies the effectiveness of the compensation method.

Startup drift compensation of RLG based on monotone constrained RBF neural network

A Temperature Drift Compensation Method Applied to Fiber Optic Gyroscope North-Seeking

Temperature drift compensation of fiber strapdown inertial navigation system based on GSA-SVR

Study on FOG Scale Factor Error Calibration in Start-Up Stage Based on GWO-GRU

Learning to Compensate for the Drift and Error of Gyroscope in Vehicle Localization

Study on Nonlinear Error Calibration of Fiber Optical Gyroscope Scale Factor Based on LSTM

Self-Adaptive Prediction and Compensation Model for High-Accuracy Mems Gyro'S Startup Drift

Identification of fiber optic gyroscope drift errors based on RBF neural network

RVM-based prediction and compensation method for the long-term stability of INS system parameters

The In-Operation Drift Compensation of MEMS Gyroscope Based on Bagging-ELM and Improved CEEMDAN

Temperature Energy Influence Compensation for MEMS Vibration Gyroscope Based on RBF NN-GA-KF Method

Analysis of Gyro Bias Depending on the Position of Inertial Measurement Unit in Rotational Inertial Navigation Systems

Multiple-Point Temperature Gradient Algorithm for Ring Laser Gyroscope Bias Compensation

An autonomous and high-accuracy gravity disturbance compensation scheme for rotary inertial navigation system

A Fast Robust In-Motion Alignment Method for Laser Doppler Velocimeter-Aided Strapdown Inertial Navigation System

Depression of Ring Laser Gyro Drift Using Rotation Modulation Technique

Precision Enhancement by Compensation of Hemispherical Resonator Gyroscope Dynamic Output Errors.

A Calibration Method for the Errors of Ring Laser Gyro in Rate-Biased Mode

An Online Gyro Scale Factor Error Calibration Method for Laser RINS

A Novel Temperature-Compensation Method Based on Correlation Analysis for Multi-Fog INS

Cold Starting Temperature Time-Related Compensation Model of Inertial Sensors Based on Particle Swarm Optimization Algorithm.