Reduction of core loss for FeSi soft magnetic composites prepared using atomic layer deposition-based coating and high-temperature annealing

Jian Wang,Xin Liu,Zhigang Zheng,Zhaoguo Qiu,Kefeng Li,Jia Xu,Kechao Lu,Dechang Zeng

DOI: https://doi.org/10.1016/j.jallcom.2022.164655

IF: 6.2

2022-07-01

Journal of Alloys and Compounds

Abstract:Using atomic layer deposition and high-temperature annealing to fabricate coatings for Fe-6.5 wt%Si powder reduce the hysteresis losses of the resultant composites drastically without sacrificing the permeability properties, and keep the eddy current losses at a relatively low value. The core loss of annealed FeSi SMCs is 39.67% lower than that of composites prepared using raw Fe-6.5 wt%Si powder, meanwhile the permeability remains at relatively high value (at B = 100 mT, f = 50 kHz). The decreasing of the core loss is mainly attributed to hysteresis loss reduction caused by grain growth. And the low eddy current loss is guaranteed by the uniform, complete, compact coating layer formed the surface of FeSi particles, which transforms to a protective and insulating layer containing silicate and metal oxide after annealing. On the premise of ensuring the integrity of the insulation layer, the annealing temperature of powder is significantly increased by surface modification, so as to reducing the hysteresis loss meanwhile controlling the eddy current loss.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering