Abstract:<p>The reported laser welding of dissimilar materials (metal and plastic) mostly focuses on the optimization of parameters and process, the process is complex and the cost is high. Liquid crystal polymer (LCP) has attracted much attention due to its excellent electrical properties. With the rapid development of information technology, 5G high-frequency communication is gradually emerging. At the same time, there are many problems to be solved, such as the serious skin effect caused by the large copper foil surface roughness and large energy consumption. Therefore, it is urgent to solve this problem for the development of communication technology. Nowadays, the manufacturing process of a two-layer flexible copper clad laminate is not only complex, but also high production cost. In order to try a new manufacturing method and balance the copper foil surface roughness and the bonding strength between the copper foil and LCP, this study proposes a laser integrated manufacturing method for two-layer flexible copper clad laminates, including LCP laser etching, copper foil laser etching and laser welding. We fabricated regular microstructures on the copper foil surface by laser etching, used ultraviolet laser to irradiate the LCP surface, the copper foil and LCP were welded together by laser conduction welding. The surface roughness of the sample was measured by atomic force microscope, the surface morphology was observed by optical microscope, and the bonding strength and peel strength between the etched copper foil and LCP were tested by micro-tensile test. The welding sample bonding strength obtained by this way can reach the ultimate tensile strength of the copper foil, and the peel strength can reach 682.78 N/m, which is close to the reported peel strength obtained by other methods. High-resolution field emission scanning electron microscope and X-ray photoelectron spectrometer were used to reveal the bonding mechanism of the samples. The integrated method is easier to realize automation for the actual production process. Therefore, we have verified that the two-layer flexible copper clad laminate with high bonding strength and peel strength can be prepared by laser processing.</p>

Bonding mechanism of laser joining of Poly-Ether-Ether-Ketone film which used for 5G antenna substrate to copper foil

Direct bonding of copper foil and liquid crystal polymer by laser etching and welding

Comparison of the effects of femtosecond and nanosecond laser tailoring on the bonding performance of the heterojunction between PEEK/CFRP and Al–Li alloy

Research on temperature-assisted laser transmission welding of copper foil and polyethylene terephthalate

Study on microstructures and mechanical performance of laser transmission welding of poly-ether-ether-ketone (PEEK) and carbon fiber reinforced PEEK (CFR-PEEK)

Effect of IR ‐laser treatment parameters on surface structure, roughness, wettability and bonding properties of fused deposition modeling‐printed PEEK / CF

Nanosecond laser ablation for improving the strength of CFRTP and aluminum alloy adhesively bonded joints

Interlayer bonding improvement of PEEK and CF-PEEK composites with laser-assisted fused deposition modeling

Improving bonding strength of aluminium-PEEK hybrid metal-polymer joints by two-step laser surface treatment

Laser Joining of Continuous Carbon Fiber-Reinforced PEEK and Titanium Alloy with High Strength

Effect of Laser Micro-Texturing on Laser Joining of Carbon Fiber Reinforced Thermosetting Composites to TC4 Alloy

Enhancing Bond Strength Between Carbon Fiber Reinforced Thermoplastic and Aluminum Alloys Through Laser Surface Treatment

Effect of beam shaping on laser joining of CFRP and Al-Li alloy

Enhancement mechanism of ultrasonic vibration on interface bonding strength in laser joining of polymer to ceramic

Effect of Interface Pretreatment of Al Alloy on Bonding Strength of the Laser Joined Al/CFRTP Butt Joint.

Improve the binding force of PEEK coating with Mg surface by femtosecond lasers induced micro/nanostructures

The damage characteristics and mechanism of CFRP during laser joining of CFRP/mild steel dissimilar joint

Enhanced laser direct joining of continuous carbon fiber reinforced polyetheretherketone and titanium alloy with controllable mechanical interlocks

Elucidation of role of carbon fibers on joining of metal to composite

Design of metalized polyether-ether-ether-ketone based on semi-additive manufacture for 5G applications: from bottom-up assembly to selective electroplating

Laser surface treatment to enhance the adhesive bonding between steel and CFRP: Effect of laser spot overlapping and pulse fluence