Abstract:Indoor air pollution remains a major concern, with formaldehyde (HCHO) a primary contributor due to its long emission period and associated health risks, including skin allergies, coughing, and bronchitis. This study evaluated the adsorption performance and economic efficiency of various adsorbents (biochar, activated carbon, zeolites A, X, and Y) selected for HCHO removal. The impact of thermal treatment on adsorbent regeneration was also assessed. The experimental apparatus featured an adsorption column and HCHO concentration meter with an electrochemical sensor designed for adsorption analysis. Zeolite X exhibited the highest adsorption performance, followed by zeolite A, zeolite Y, activated carbon, and biochar. All adsorbents displayed increased HCHO removal rates with an extended length/diameter (L/D) ratio of the adsorption column. Zeolite A demonstrated the highest economic efficiency, followed by zeolite X, activated carbon, zeolite Y, and biochar. Higher L/D ratios improved economic efficiency and prolonged the replacement cycle (the optimal timing for adsorbent replacement to maintain high adsorption performance). Sensitivity analysis of adsorbent regeneration under varying thermal treatment conditions (150, 120, and 80°C) and durations (60, 45, and 30 min) revealed minimal changes in adsorption efficiency (±3%). The results indicated the potential of adsorbent regeneration under energy-efficient thermal treatment conditions (80°C, 30 min). In conclusion, this study underscores the importance of a comprehensive assessment, considering factors such as adsorption performance, replacement cycle, economic efficiency, and regeneration performance for the selection of optimal adsorbents for HCHO adsorption and removal. Implications : This study underscores the importance of adsorption technology for the removal of formaldehyde and similar volatile organic compounds (VOCs), highlighting the potential of alternative adsorbents, such as environmentally friendly biochar, in addition to traditional strategies, such as activated carbon and zeolites. Our findings demonstrate the feasibility of adsorbent regeneration under energy-efficient thermal treatment conditions. These results hold promise for improving indoor air quality, reducing environmental pollutants, and enhancing responses to air contaminants like fine dust and VOCs.

Competitive adsorption of gaseous acetic acid, ethanol and acetaldehyde onto wool powder

Kinetic and thermodynamic studies on gas adsorption behaviour of natural fibres

The adsorption kinetics and mechanism of odorous gases onto textile fibers

Correlations and Prediction of Adsorption Capacity and Affinity of Aromatic Compounds on Activated Carbons

Competitive adsorption characteristics of VOCs and water vapor by activated carbon prepared from Fe/N-doped pistachio shell

Porous, Colorful and Gas-Adsorption Powder from Wool Waste for Textile Functionalization

Optimized Porous Clay Heterostructure for Removal of Acetaldehyde and Toluene from Indoor Air

Investigation of the competitive adsorption mechanism between typical volatile organic compounds (VOCs) and water vapor in waste gas emissions from the fermentation industry

High-efficiency Removal of Gaseous HCHO by Amine Functionalized Natural Opoka

Experimental and molecular perspective on VOCs adsorption and separation: Study of the surface heterogeneity and oxygen functionalizing

EXPERIMENTAL AND MODELED RESULTS DESCRIBING THE ADSORPTION OF TRACE VOCS ON ACTIVATED CARBON FIBERS

Adsorption materials for volatile organic compounds (VOCs) and the key factors for VOCs adsorption process: A review

The contribution of oxygen-containing functional groups to the gas-phase adsorption of volatile organic compounds with different polarities onto lignin-derived activated carbon fibers

Experiment on Adsorption Characteristics of Nonwoven Cloth with Activated Carbon for VOC from Varnish

Deep eutectic solvents for effective removal of indoor formaldehyde: Theoretical design, experiment, and adsorption mechanism study

Study on adsorption and gas sensitive behavior of WO 3 (002) and (200) crystal planes

Adsorption Characteristics of Dichloromethane-Ethyl Acetate/toluene Vapor on a Hypercrosslinked Polystyrene Adsorbent.

Evaluation of the adsorption performance and thermal treatment-associated regeneration of adsorbents for formaldehyde removal

Experimental and Modeled Results Describing Adsorption of Trace VOCs Onto Oxidized ACF

Management of typical VOCs in air with adsorbents: status and challenges

Liquid film coated porous sorbents to trap gaseous acetaldehyde