Aalto-1 CubeSat Mission Design Optimization

Muhammad Siddique

2015-08-24

Abstract:Small satellites are becoming increasingly popular solution for many space organizations and universities, both for commercial applications and scientific experimentation. The advances in electroni ...

Physics,Engineering

What problem does this paper attempt to address?

Nonlinear Programming Control Using Differential Aerodynamic Drag for CubeSat Formation Flying

Sheng-chao Deng,Tao Meng,Zhong-he Jin

DOI: https://doi.org/10.1631/fitee.1500493

2017-01-01

Abstract:Because of their volume and power limitation, it is difficult for CubeSats to configure a traditional propulsion system. Atmospheric drag is one of the space environmental forces that low-orbit satellites can use to realize orbit adjustment. This paper presents an integrated control strategy to achieve the desired in-track formation through the atmospheric drag difference, which will be used on ZJUCubeSat, the next pico-satellite of Zhejiang University and one of the participants of the international QB50 project. The primary mission of the QB50 project is to explore the near-Earth thermosphere and ionosphere at the orbital height of 90–300 km. Atmospheric drag cannot be ignored and has a major impact on both attitude and orbit of the satellite at this low orbital height. We conduct aerodynamics analysis and design a multidimensional nonlinear constraint programming (MNLP) strategy to calculate different desired area–mass ratios and corresponding hold times for orbit adjustment, taking both the semimajor axis and eccentricity into account. In addition, area–mass ratio adjustment is achieved by pitch attitude maneuver without any deployable mechanism or corresponding control. Numerical simulation based on ZJUCubeSat verifies the feasibility and advantage of this design.
CubeSat standardized modular assembly method and design optimization

Jiaolong Zhang,Chao Wang,Haoyu Xing,Jianguo Guo

DOI: https://doi.org/10.1016/j.actaastro.2024.01.011

IF: 2.954

2024-01-10

Acta Astronautica

Abstract:In order to solve the deficiencies of traditional board-level assembly CubeSat, such as low modularity, complex assembly process and poor scalability, a sandwich module assembly structure and method with no drive components is proposed, which can achieve quick connection and flexible assembly between modules. First, the proposed CubeSat standard module can be compatible with the standard interface of traditional CubeSat. The 4-in-1 interface of Mechanical-Electrical-Thermal-Data does not occupy the internal space of the standard module, and the electrical and thermal interfaces meet the requirements of CubeSat in-orbit work. Secondly, in order to improve the reliability of the connection between the modules, a plug-in connection scheme of the mechanical interface was designed. Finally, a genetic algorithm was used to optimize the interface size, so that it has better plug-in performance. The simulation results show that the performance of the male interface of titanium alloy material is the best, and the error between the finite element analysis and genetic algorithm results is less than 4.8 %, which is consistent with the actual tensile test results of the optimized prototype, and meets the mechanical requirements of the launch process and space orbit operation for CubeSat. The test results can guide production and provide a reference for subsequent engineering applications of CubeSat modular assembly.

engineering, aerospace
Automated Design of CubeSats and Small Spacecrafts

Himangshu Kalita,Jekan Thangavelautham

DOI: https://doi.org/10.48550/arXiv.1701.01742

2017-01-07

Abstract:The miniaturization of electronics, sensors and actuators has enabled the growing use of CubeSats and sub-20 kg spacecraft. Their reduced mass and volume has the potential to translate into significant reductions in required propellant and launch mass for interplanetary missions, earth observation and for astrophysics applications. There is an important need to optimize the design of these spacecraft to better ascertain their maximal capabilities by finding optimized solution, where mass, volume and power is a premium. Current spacecraft design methods require a team of experts, who use their engineering experience and judgement to develop a spacecraft design. Such an approach can miss innovative designs not thought of by a human design team. In this work we present a compelling alternative approach that extends the capabilities of a spacecraft engineering design team to search for and identify near-optimal solutions using machine learning. The approach enables automated design of a spacecraft that requires specifying quantitative goals, requiring reaching a target location or operating at a predetermined orbit for a required time. Next a virtual warehouse of components is specified that be selected to produce a candidate design. Candidate designs are produced using an artificial Darwinian approach, where fittest design survives and reproduce, while unfit individuals are culled off. Our past work in space robotic has produced systems designs and controllers that are human competitive. Finding a near-optimal solution presents vast improvements over a solution obtained through engineering judgment and point design alone. The approach shows a credible pathway to identify and evaluate many more candidate designs than it would be otherwise possible with a human design team alone.

Instrumentation and Methods for Astrophysics,Systems and Control
Reusable and Reliable Flight-Control Software for a Fail-Safe and Cost-Efficient Cubesat Mission: Design and Implementation

Ibtissam Latachi,Tajjeeddine Rachidi,Mohammed Karim,Ahmed Hanafi

DOI: https://doi.org/10.3390/aerospace7100146

IF: 2.66

2020-10-10

Aerospace

Abstract:While there is no rigorous framework to develop nanosatellites flight software, this manuscript aimed to explore and establish processes to design a reliable and reusable flight software architecture for cost-efficient student Cubesat missions such as Masat-1. Masat-1 is a 1Unit CubeSat, developed using a systems engineering approach, off-the-shelf components and open-source software tools. It was our aim to use it as a test-bed platform and as an initial reference for Cubesat flight software development in Morocco. The command and data handling system chosen for Masat-1 is a system-on-module-embedded computer running freeRTOS. A real-time operating system was used in order to simplify the real-time onboard management. To ensure software design reliability, modularity, reusability and extensibility, our solution follows a layered service oriented architectural pattern, and it is based on a finite state machine in the application layer to execute the mission functionalities in a deterministic manner. Moreover, a client-server model was elected to ensure the inter-process communication and resources access while using uniform APIs to enhance cross-platform data exchange. A hierarchical fault tolerance architecture was also implemented after a systematic assessment of the Masat-1 mission risks using reliability block diagrams (RBDs) and functional failure mode, effect and criticality analysis (FMECA).

engineering, aerospace
Integrated after-market solar panel antennas with multi-diversity

Taha Shahvirdi,Reyhan Baktur

DOI: https://doi.org/10.1109/usnc-ursi.2013.6715417

2013-07-01

Abstract:Cube satellites (CubeSat) are in the family of small satellites and typically a 1U CubeSat is a 10×10×10 cm3 cube. In application, 2 or 3 1U CubeSat can be stacked together to form a satellite in order to perform extended science mission that the 1U ones. As the size of a CubeSat is very small, there is an increased challenge due to the competition of solar cells and antennas for surface space. One effective method to resolve this issue is to integrate antennas with solar panels without affecting the solar cell performance. From such an integration perspective, cavity backed slot antennas become very good choice.
CubeSat Communications: Recent Advances and Future Challenges

Nasir Saeed,Ahmed Elzanaty,Heba Almorad,Hayssam Dahrouj,Tareq Y. Al-Naffouri,Mohamed-Slim Alouini

DOI: https://doi.org/10.36227/techrxiv.12179397

2020-04-23

Abstract:Given the increasing number of space-related applications, research in the emerging space industry is becoming more and more attractive. One compelling area of current space research is the design of miniaturized satellites, known as CubeSats, which are enticing because of their numerous applications and low design-and-deployment cost. The new paradigm of connected space through CubeSats makes possible a wide range of applications, such as Earth remote sensing, space exploration, and rural connectivity. CubeSats further provide a complementary connectivity solution to the pervasive Internet of Things (IoT) networks, leading to a globally connected cyber-physical system. This paper presents a holistic overview of various aspects of CubeSat missions and provides a thorough review of the topic from both academic and industrial perspectives. We further present recent advances in the area of CubeSat communications, with an emphasis on constellation-and-coverage issues, channel modeling, modulation and coding, and networking. Finally, we identify several future research directions for CubeSat communications, including Internet of space things, low-power long-range networks, and machine learning for CubeSat resource allocation.
Utilizing Low-Cost Linux Micro-Computer & Android Phone Solutions on Cube-Satellites

Ahmed Farid,Ahmed Samy,Ahmed Shalaby,Ahmed Tarek,Mahmoud Ayyad,Muhammad Assem,Samy Amin

DOI: https://doi.org/10.48550/arXiv.2205.08255

2022-05-15

Abstract:Realizing functional space systems using flight-tested components is problematic in developing economies, as such components are costly for most institutions to sponsor. The <a class="link-external link-http" href="http://B.Sc" rel="external noopener nofollow">this http URL</a>. project, Subsystems for 2nd Iteration Cairo University Cube-Satellite, addresses technology demonstration using commercially available electronics and low cost computing platforms, such as Android phones and Raspberry Pi Linux micro-computer as computing hardware. As for software, the project makes use of open-source modules and locally developed code to implement needed functionalities, in addition to a mechanism to operate a virtual desktop Linux OS in parallel to an Android application. The paper aims to demonstrate the significance, operation design, and problem solving of such approaches. The paper concludes with future prospects for improving upon the proposed computing systems

Other Computer Science
Open-Source CubeSat Solar Panels: Design, Assembly, Testing, and On-Orbit Demonstration

Nicholas J. Sorensen,Erik F. Halliwell

2024-07-28

Abstract:Cube satellites, or CubeSats, are small satellites commonly used to perform Earth imaging and on-orbit scientific experiments. CubeSats are often powered using expensive, inflexible commercial-off-the-shelf solar panels, largely due to a lack of flight-qualified open-source alternatives. Here, we describe the design of customizable, deployable solar panels, offering an open-source, cost-effective alternative. Towards a fully open-source CubeSat, our designs have mission-tailored power generation capabilities and simple electrical and mechanical integration. The solar panel designs were demonstrated on-orbit on three satellites in the Northern SPIRIT constellation and will be on AlbertaSat's Ex-Alta~3 satellite, which will launch in 2025. The design files, assembly procedures, and best practices will be open-source-published online. This work lowers the barrier of entry into space, making satellite design easier and less expensive -- students helping students design better satellites.

Instrumentation and Detectors
SSS-2A: A 3U CubeSat Project for an In-Orbit Formation Flying Mission

Huang Yixin,Mu Zhongcheng,Chu Sunhao,Wu Shufan

DOI: https://doi.org/10.1007/978-981-16-8154-7_25

2022-01-01

Abstract:The Student Small Satellite (SSS) project is an education and training program for university students to have hands-on experience on the satellite design, development, and implementation practice. It consists of 3 Micro/Nano satellites forming an in-orbit formation flying for technology demonstration and some in-orbit experiments. SSS-1 is a microsatellite of 30 kg mass, being developed by a consortium of 4 countries, with Beihang University as the lead, and being participated by teams from Pakistan, Iran, and Turkey. SSS-2A is a 3U CubeSat, being developed by the Shanghai Jiao Tong University. And the SSS-2B is another 3U CubeSat, being developed by a team from Turkey, together with support from Thailand. This paper mainly introduces the SSS project and further presents the detailed system design and development of the SSS-2A CubeSat, including its main system constitution, main payload selection, and the latest development status and schedule. Technical details of each subsystem will also be discussed and analysed. Some simulation results will be given to show the design performance. It is going to be launched before the end of 2021.
Modular Multifunctional Composite Structure for CubeSat Applications: Preliminary Design and Structural Analysis

Giorgio Capovilla,Enrico Cestino,Leonardo M. Reyneri,Giulio Romeo

DOI: https://doi.org/10.3390/aerospace7020017

IF: 2.66

2020-02-24

Aerospace

Abstract:CubeSats usually adopt aluminum alloys for primary structures, and a number of studies exist on Carbon Fiber Reinforced Plastic (CFRP) primary structures. The internal volume of a spacecraft is usually occupied by battery arrays, reducing the volume available to the payload. In this paper, a CFRP structural/battery array configuration has been designed in order to integrate the electrical power system with the spacecraft bus primary structure. The configuration has been designed according to the modular design philosophy introduced in the AraMiS project. The structure fits on an external face of a 1U CubeSat. Its external side houses two solar cells and the opposite side houses power system circuitry. An innovative cellular structure concept has been adopted and a set of commercial LiPo batteries has been embedded between two CFRP panels and spaced out with CFRP ribs. Compatibility with launch mechanical loads and vibrations has been shown with a finite element analysis. The results suggest that, even with a low degree of structural integration applied to a composite structural battery, more volume and mass can be made available for the payload, with respect to traditional, functionally separated structures employing aluminum alloy. The low degree of integration is introduced to allow the use of relatively cheap and commercial-off-the-shelf components.

engineering, aerospace
Low Cost Radiation Hardened Software and Hardware Implementation for CubeSats

Brosnan Yuen,Mihai Sima

DOI: https://doi.org/10.18357/tar91201818386

2019-02-12

Abstract:CubeSats are small satellites used for scientific experiments because they cost less than full sized satellites. Each CubeSat uses an on-board computer. The on-board computer performs sensor measurements, data processing, and CubeSat control. The challenges of designing an on-board computer are costs, radiation, thermal stresses, and vibrations. An on-board computer was designed and implemented to solve these challenges. The on-board computer used special components to mitigate radiation effects. Software was also used to provide redundancies in cases of faults. This paper may aid future spacecraft design as it improves the reliability of spacecraft, while keeping costs low.

Space Physics,Instrumentation and Methods for Astrophysics
Advanced CubeSat Antennas for Deep Space and Earth Science Missions: A review

Nacer Chahat,Emmanuel Decrossas,David Gonzalez-Ovejero,Okan Yurduseven,Matthew J. Radway,Richard E. Hodges,Polly Estabrook,John D. Baker,David J. Bell,Thomas A. Cwik,Goutam Chattopadhyay

DOI: https://doi.org/10.1109/map.2019.2932608

IF: 3.179

2019-10-01

IEEE Antennas and Propagation Magazine

Abstract:Small satellites (smallsats) provide low-cost access to space and have historically been used for flight technology demonstrations and limited-function space science activities. Novel antenna technologies have enabled high-performance smallsat telecommunications, science in Earth orbit, and the first CubeSat mission to deep space. In the past five years, technologists at NASA's Jet Propulsion Laboratory (JPL) have designed, tested, and successfully flown these innovative and enabling smallsat antennas. This article describes these innovations and their impact on smallsat performance for recent and future NASA missions.

telecommunications,engineering, electrical & electronic
Modular Multifunctional Composite Structure for CubeSat Applications: Embedded Battery Prototype Modal Analysis

Giorgio Capovilla,Enrico Cestino,Leonardo Reyneri

DOI: https://doi.org/10.3390/aerospace10121009

IF: 2.66

2023-11-30

Aerospace

Abstract:Current CubeSats usually exhibit a low structural mass efficiency and a low internal volume for their payloads. The present work aims to propose an advanced structural architecture for CubeSats that addresses the issues of low structural mass efficiency and payload volume. The starting concept is the smart tiles architecture for satellites developed for the ARAMIS (an Italian acronym for a highly modular architecture for satellite infrastructures) CubeSat project. By introducing multifunctional structures and lightweight, composite materials in the design of smart tiles, the volumetric and structural mass efficiency of the entire CubeSat are enhanced. The advantages of the chosen approach are preliminarily analyzed in terms of the volumetric efficiency and amplitude of the payload design space. A 1U battery tile design is then selected to investigate the multifunctional structures design aspects in the project of space structures. A battery tile prototype is designed, produced, and tested. The CubeSat volumetric increment and the payload volume gain with respect to the traditional architecture is shown to reach a maximum of 37%. The CubeSat structural mass ratio can be reduced to 16.7%.

engineering, aerospace
CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Shoaib Ahmed Khan,Yang Shiyou,Anwar Ali,Mustafa Tahir,Shah Fahad,Shaowei Rao

DOI: https://doi.org/10.1016/j.asr.2022.10.053

IF: 2.611

2023-01-01

Advances in Space Research

Abstract:After deployment from a rocket, a CubeSat is detumbled using magnetorquer rods bringing the norm to the point where the reaction wheels take over to reduce the angular velocity to null. Therefore, utilizing reaction wheels for satellite detumbling at higher initial velocities is vital but they are heavy and occupy significant space on a spacecraft having challenging control. To address this challenge, this paper features a disruptive approach that conducts the control only by the PCB-integrated magnetorquers with various geometries using a diverse non-unity track width ratio. The trace widths are parametrized such that the optimal torque to power dissipation ratio is investigated. The optimizations are then simulated for various geometric distributions and validated through comprehensive measurement setups that establish a framework for selecting the best-case coil configuration according to mission requirements. The detumbling rates of multiple asymmetric coil configurations are compared with the embedded designs in published literature and state of the art. It is found that the proposed asymmetric embedded magnetorquers can detumble the vehicle at high initial angular velocities. Lastly, the simulation results of thermal analysis are validated for selecting the application-specific optimal coils configuration. At the end, the proposed system is compared with the embedded magnetorquers available in the literature and commercial attitude control systems.
Design and Implementation of a Cube Satellite Mission for Antarctic Glacier and Sea Ice Observation

Shufan Wu,Tiancheng Zhao,Yuan Gao,Xiao Cheng

DOI: https://doi.org/10.1016/j.actaastro.2017.07.023

IF: 2.954

2017-01-01

Acta Astronautica

Abstract:The research for global climate changes calls for high quality satellite data and imageries regarding the Polar Regions. In recent years, the emerging Earth-Observation micro/nano satellite technology provides new data sources for polar region observations. The STU-2A, also named TW-1A, is such a nano satellite designed for polar region observation activities. It is a 3U CubeSat of 2.9 kg with a size of 30 x 10 x 10 cm carrying an Earth observation camera, launched into a Sun Synchronous Orbit (SSO) at 481 km with an inclination of 97.3, on September 25, 2015. During the Antarctic summer of 2015/16, it has acquired visible-light true color images with a resolution of 94 m, covering different sea and coastal regions including Amundsen Sea, Ross Sea and Vincennes Bay. These images were used to analyze the change of glacier and sea ice, compared and calibrated with reference to the publically available MODIS images with a resolution of 250 m. As the camera was specially designed for the Polar regions which have an environment of low solar elevation angle and high surface reflectance, it eliminates the oversaturation problem of the MODIS sensors and can provide high quality images. Based on data analysis and assessment, it is confirmed that this satellite data can meet the demand of glacier and sea ice observation. This paper presents the Cubesat system design and configuration, the payload camera design, and its application in Antarctic glacier and sea ice observation.
CubeSats for Astronomy and Astrophysics

Ewan S. Douglas,Kerri L. Cahoy,Mary Knapp,Rachel E. Morgan

DOI: https://doi.org/10.48550/arXiv.1907.07634

2019-12-02

Abstract:CubeSats have the potential to expand astrophysical discovery space, complementing ground-based electromagnetic and gravitational-wave observatories. The CubeSat design specifications help streamline delivery of instrument payloads to space. CubeSat planners have more options for tailoring orbits to fit observational needs and may have more flexibility in rapidly rescheduling observations to respond to transients. With over 1000 CubeSats launched, there has been a corresponding increase in the availability and performance of commercial-off-the-shelf (COTS) components compatible with the CubeSat standards, from solar panels and power systems to reaction wheels for three axis stabilization and precision attitude control. Commercially available components can reduce cost CubeSat missions, allowing more resources to be directed toward scientific instrument payload development and technology demonstrations.

Instrumentation and Methods for Astrophysics
Agile Stage-Gate Approach for Design, Integration, and Testing of a 1U CubeSat

Enrique Rafael García-Sánchez,Héctor Simón Vargas-Martínez,Filiberto Candia-García,Joel Contreras-Lima

DOI: https://doi.org/10.3390/aerospace11040324

IF: 2.66

2024-04-23

Aerospace

Abstract:Life cycle stages are very important for the aerospace industry. Many models have emerged for handling the processes within and across the development of new products. Developing CubeSat-based missions has shortened the required time and has reduced expenses. However, the lack of strategic planning in the design, integration, and testing of product development models has been highlighted as one of the key issues contributing to failures. The objective of this study is to propose a new hybrid model for the physical development of a product using an Agile Stage-Gate methodology focused on a 1U CubeSat (AztechSat-1). This study aims to explain the full process throughout the project timeline from conceptualization to execution. The benefits of such a model include ensuring adaptive responses to not only improve technical integration but also allow the successful validation and verification of a nanosatellite. Our theoretical approach articulates an in-depth understanding of Agile Stage-Gate methodology through experience obtained from experts and team members. Our analysis supports the expected benefits of the iterative process at every stage. Through this approach, product development could benefit from reduced times and better innovations. Nevertheless, there are also drawbacks to this method. The requirements of greater human effort, more frequent demonstrations, and a constant review process have negative impacts. Additionally, particular modifications must be made for each area of research. For educational purposes, the initial results seem to be encouraging.

engineering, aerospace
Design and Implementation of a Ka-band Folding Rib Mesh Antenna for CubeSats

Jonathan F. Sauder,Nacer Chahat,Richard E. Hodges,Yahya Rahmat-Samii,Mark Thomson

DOI: https://doi.org/10.2514/1.j064010

IF: 2.624

2024-10-17

AIAA Journal

Abstract:In the past decade, CubeSats have undergone a revolution, moving from university research projects to enabling industry opportunities and government missions. In 2014, the Jet Propulsion Laboratory, California Institute of Technology (JPL/Caltech) initiated a research and technology development effort to advance CubeSat communication capabilities. One of the critical thrusts was the Ka-band parabolic deployable antenna (KaPDA). This antenna started with the ambitious goal of fitting a 42 dB, 0.5 m, 35 GHz antenna in a 1.5U canister. At that time, there had been minimal development in high-gain CubeSat antennas, critical for high-data-rate communications and remote sensing science. A Ka-band high-gain antenna would provide a 10,000 times increase in data communication rates over an X-band patch antenna and a 100 times increase over state-of-the-art S-band parabolic antennas. This paper discusses designing, building, integrating, and operating the flight antenna from a mechanical perspective, its final performance, and lessons learned. KaPDA enabled the RainCube mission, the first Earth Science CubeSat to have an active instrument. RainCube was launched in May 2018, making KaPDA the second deployable parabolic antenna to fly on a CubeSat and the first to operate in Ka-band, enabling follow-on opportunities for high-rate antenna communications and remote sensing science.

engineering, aerospace
CubeSat Deployable Ka-Band Mesh Reflector Antenna Development for Earth Science Missions

Nacer Chahat,Richard E. Hodges,Jonathan Sauder,Mark Thomson,Eva Peral,Yahya Rahmat-Samii

DOI: https://doi.org/10.1109/tap.2016.2546306

IF: 5.7

2016-06-01

IEEE Transactions on Antennas and Propagation

Abstract:CubeSats are positioned to play a key role in Earth Science, wherein multiple copies of the same RADAR instrument are launched in desirable formations, allowing for the measurement of atmospheric processes over a short evolutionary timescale. To achieve this goal, such CubeSats require a high-gain antenna (HGA) that fits in a highly constrained volume. This paper presents a novel mesh deployable Ka-band antenna design that folds in a 1.5U $(10\times 10 \times 15 \,\text{cm}^{3})$ stowage volume suitable for 6U $(10\times 20 \times 30 \,\text{cm}^{3})$ class CubeSats. Considering all aspects of the deployable mesh reflector antenna including the feed, detailed simulations and measurements show that 42.6-dBi gain and 52% aperture efficiency is achievable at 35.75GHz. The mechanical deployment mechanism and associated challenges are also described, as they are critical components of a deployable CubeSat antenna. Both solid and mesh prototype antennas have been developed and measurement results show excellent agreement with simulations.

telecommunications,engineering, electrical & electronic
Optimized Design of Embedded Air Coil for Small Satellites with Various Dimensions

Shoaib Ahmed Khan,Anwar Ali,Yang Shiyou,Jijun Tong,Josep M. Guerrero

DOI: https://doi.org/10.2514/1.I010882

2021-01-01

Journal of Aerospace Information Systems

Abstract:Active attitude control systems using a novel six-layer electromagnetic embedded printed air coil for small satellites with various dimensions are presented in this paper. The proposed designs are optimized in terms of available area, generated torque, power dissipation, and generated magnetic dipole moment. The designed printed air coils are the best choice for small satellites' attitude stabilization in terms of their modularity, reconfigurability, lower cost, lesser space occupation, and low mass. The printed air coil is designed and analyzed for three small satellites with dimensions 10, 13, and 16 cm(3). The design is implemented with commercial off-the-shelf microdevices that are inexpensive, reliable, and easily accessible. The printed air coil is integrated in internal layers of printed circuit board, which does not require additional space on the spacecraft. The proposed air coil with additional configurability features (2x3, 3x2 hybrid) provides more flexibility to the design aspects by changing the arrangement through the onboard processor according to mission requirements. Electrothermal analysis of the air coil module is done to keep the thermals in check and validate its feasibility. Time-varying rotational operation of nanosatellites is performed to test the rotation time for spin-stabilized satellites. Significant performance parameters like generated magnetic moment, resultant torque, and power dissipation are evaluated and compared with the already commercial state-of-the-art.

Aalto-1 CubeSat Mission Design Optimization

Nonlinear Programming Control Using Differential Aerodynamic Drag for CubeSat Formation Flying

CubeSat standardized modular assembly method and design optimization

Automated Design of CubeSats and Small Spacecrafts

Reusable and Reliable Flight-Control Software for a Fail-Safe and Cost-Efficient Cubesat Mission: Design and Implementation

Integrated after-market solar panel antennas with multi-diversity

CubeSat Communications: Recent Advances and Future Challenges

Utilizing Low-Cost Linux Micro-Computer & Android Phone Solutions on Cube-Satellites

Open-Source CubeSat Solar Panels: Design, Assembly, Testing, and On-Orbit Demonstration

SSS-2A: A 3U CubeSat Project for an In-Orbit Formation Flying Mission

Modular Multifunctional Composite Structure for CubeSat Applications: Preliminary Design and Structural Analysis

Low Cost Radiation Hardened Software and Hardware Implementation for CubeSats

Advanced CubeSat Antennas for Deep Space and Earth Science Missions: A review

Modular Multifunctional Composite Structure for CubeSat Applications: Embedded Battery Prototype Modal Analysis

CubeSats Detumbling Using Only Embedded Asymmetric Magnetorquers

Design and Implementation of a Cube Satellite Mission for Antarctic Glacier and Sea Ice Observation

CubeSats for Astronomy and Astrophysics

Agile Stage-Gate Approach for Design, Integration, and Testing of a 1U CubeSat

Design and Implementation of a Ka-band Folding Rib Mesh Antenna for CubeSats

CubeSat Deployable Ka-Band Mesh Reflector Antenna Development for Earth Science Missions

Optimized Design of Embedded Air Coil for Small Satellites with Various Dimensions