Abstract:Mechanical metamaterials are man-made rationally-designed structures that present unprecedented mechanical properties not found in nature. One of the most well-known mechanical metamaterials is auxetics, which demonstrates negative Poisson’s ratio (NPR) behavior that is very beneficial in several industrial applications. In this study, a specific type of auxetic metamaterial structure namely idealized 3D re-entrant structure is studied analytically, numerically, and experimentally. The noted structure is constructed of three types of struts—one loaded purely axially and two loaded simultaneously flexurally and axially, which are inclined and are spatially defined by angles θ and φ. Analytical relationships for elastic modulus, yield stress, and Poisson’s ratio of the 3D re-entrant unit cell are derived based on two well-known beam theories namely Euler–Bernoulli and Timoshenko. Moreover, two finite element approaches one based on beam elements and one based on volumetric elements are implemented. Furthermore, several specimens are additively manufactured (3D printed) and tested under compression. The analytical results had good agreement with the experimental results on the one hand and the volumetric finite element model results on the other hand. Moreover, the effect of various geometrical parameters on the mechanical properties of the structure was studied, and the results demonstrated that angle θ (related to tension-dominated struts) has the highest influence on the sign of Poisson’s ratio and its extent, while angle φ (related to compression-dominated struts) has the lowest influence on the Poisson’s ratio. Nevertheless, the compression-dominated struts (defined by angle φ) provide strength and stiffness for the structure. The results also demonstrated that the structure could have zero Poisson’s ratio for a specific range of θ and φ angles. Finally, a lightened 3D re-entrant structure is introduced, and its results are compared to those of the idealized 3D re-entrant structure.

Experimental mechanical properties, nonlinear bending and instability analysis of 3D-printed auxetic tubular metastructures using multiscale finite element and Ritz methods

Nonlinear vibration analysis of pre/post-buckled 3D-printed tubular metastructures

An experimental and numerical study on an innovative metastructure for 3D printed thermoplastic polyurethane with auxetic performance

Idealized 3D Auxetic Mechanical Metamaterial: An Analytical, Numerical, and Experimental Study

3D auxetic mechanical metamaterials: an analytical, numerical, and experimental study

Experimental Analysis and Design of 3D-Printed Polymer Elliptical Tubes in Compression

On the Design and Mechanical Properties of a Novel Tubular Auxetic Anti-Tri-Missing Rib Structure

Unveiling the Mechanics of Deep-Sea Sponge-Inspired Tubular Metamaterials: Exploring Bending, Radial, and Axial Mechanical Behavior

Bioinspired 3D‐Printed Auxetic Structures with Enhanced Fatigue Behavior

Design and optimization of bioinspired auxetic structure for biomedical applications

3D printable strain rate-dependent machine-matter

Computing the bond strength of 3D printed polylactic acid scaffolds in mode I and II using experimental tests, finite element method and cohesive zone modeling

3D-Printed Twisting Tubular Metamaterials with Tunable Mechanical and Torsional Characteristics

Effect of design parameters on auxetic behavior and stiffness of additively manufactured 316L stainless steel

Sequentially tunable buckling in 3D printing auxetic metamaterial undergoing twofold viscoelastic resonances

3D-Printed Programmable Mechanical Metamaterials for Vibration Isolation and Buckling Control

Experimental and Numerical Analysis of a Novel Assembled Auxetic Structure with Two-Stage Programmable Mechanical Properties

Influence of Loading Rate and Temperature on the Energy Absorption of 3D-Printed Polymeric Origami Tubes under Quasi-Static Loading

Design and testing of 3D-printed micro-architectured polymer materials exhibiting a negative Poisson's ratio

Mechanical Properties and Energy Absorption Characteristics of a Novel Skeletal-United Tubular Metamaterial with Negative Poisson's Ratio

Study of Mechanical Properties of a New 3D Re‐Entrant Lattice Auxetic Structure under Bending