Abstract:With the advancement of the Internet of Things (IoTs) technology, security issues have received an increasing amount of attention. Since IoT devices are typically resource-limited, conventional security solutions, such as classical cryptography, are no longer applicable. A physically unclonable function (PUF) is a hardware-based, low-cost alternative solution to provide security for IoT devices. It utilizes the inherent nature of hardware to generate a random and unpredictable fingerprint to uniquely identify an IoT device. However, despite existing PUFs having exhibited a good performance, they are not suitable for effective application on resource-constrained IoT devices due to the limited number of challenge-response pairs (CRPs) generated per unit area and the large hardware resources overhead. To solve these problems, this article presents an ultra-lightweight reconfigurable PUF solution, which is named RPPUF. Our method is built on pico-PUF (PPUF). By incorporating configurable logics, one single RPPUF can be instantiated into multiple samples through configurable information K. We implement and verify our design on the Xilinx Spartan-6 field programmable gate array (FPGA) microboards. The experimental results demonstrate that, compared to previous work, our method increases the uniqueness, reliability and uniformity by up to 4.13%, 16.98% and 10.5%, respectively, while dramatically reducing the hardware resource overhead by 98.16% when a 128-bit PUF response is generated. Moreover, the bit per cost (BPC) metric of our proposed RPPUF increased by up to 28.5 and 53.37 times than that of PPUF and the improved butterfly PUF, respectively. This confirms that the proposed RPPUF is ultra-lightweight with a good performance, making it more appropriate and efficient to apply in FPGA-based IoT devices with constrained resources.

Piezoresistive-Based Physical Unclonable Function

A Strong Physical Unclonable Function with Machine Learning Immunity for Internet of Things Application

A Strong Physical Unclonable Function With Virgin State Embedded Phase Change Memory

Ferroelectric FET-based strong physical unclonable function: a low-power, high-reliable and reconfigurable solution for Internet-of-Things security

PI PUF: A Processor-Intrinsic PUF for IoT

Memristive Crypto Primitive for Building Highly Secure Physical Unclonable Functions

Lightweight Strong PUF for Resource-Constrained Devices

A Proof of Concept SRAM-based Physically Unclonable Function (PUF) Key Generation Mechanism for IoT Devices

Intrinsic Random Optical Features of the Electronic Packages As Physical Unclonable Functions for Internet of Things Security

A Novel Configurable RO-Obfuscated PUF Design with Machine Learning Immunity

Physical unclonable function using photonic spin Hall effect

Design Impedance Mismatch Physical Unclonable Functions for IoT Security

25.2 A Reconfigurable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source with <6×10−6 Native Bit Error Rate

Concealable Physically Unclonable Function Chip with a Memristor Array

High Steady-State Physical Unclonable Function Generator Based On Gas Sensors

Halide perovskite memristors as flexible and reconfigurable physical unclonable functions

A 0.09-Pj/bit Logic-Compatible Multiple-Time Programmable (MTP) Memory-Based PUF Design for IoT Applications

First demonstration of reconfigurable and low-power strong physical unclonable function empowered by FeFET cycle-to-cycle variation

RPPUF: an Ultra-Lightweight Reconfigurable Pico-Physically Unclonable Function for Resource-Constrained IoT Devices

Physical Unclonable Function Chip based on SOT-MRAM in 180 nm CMOS Technology

Building Secure SRAM PUF Key Generators on Resource Constrained Devices