Abstract:We evaluate the retrieval performance of the automated, unsupervised inversion algorithm, Tikhonov Advanced Regularization Algorithm (TiARA), which is used for the autonomous retrieval of microphysical parameters of anthropogenic and natural pollution particles. TiARA (version 1.0) has been developed in the past 10 years and builds on the legacy of a data-operator-controlled inversion algorithm used since 1998 for the analysis of data from multiwavelength Raman lidar. The development of TiARA has been driven by the need to analyze in (near) real time large volumes of data collected with NASA Langley Research Center's high-spectral-resolution lidar (HSRL-2). HSRL-2 was envisioned as part of the NASA Aerosols-Clouds-Ecosystems mission in response to the National Academy of Sciences (NAS) Decadal Study mission recommendations 2007. TiARA could thus also serve as an inversion algorithm in the context of a future space-borne lidar. We summarize key properties of TiARA on the basis of simulations with monomodal logarithmic-normal particle size distributions that cover particle radii from approximately 0.05 μm to 10 μm. The real and imaginary parts of the complex refractive index cover the range from non-absorbing to highly light-absorbing pollutants. Our simulations include up to 25% measurement uncertainty. The goal of our study is to provide guidance with respect to technical features of future space-borne lidars, if such lidars will be used for retrievals of microphysical data products, absorption coefficients, and single-scattering albedo. We investigate the impact of two different measurement-error models on the quality of the data products. We also obtain for the first time, to the best of our knowledge, a statistical view on systematic and statistical uncertainties, if a large volume of data is processed. Effective radius is retrieved to 50% accuracy for 58% of cases with an imaginary part up to 0.01i and up to 100% of cases with an imaginary part of 0.05i. Similarly, volume concentration, surface-area concentration, and number concentrations are retrieved to 50% accuracy in 56%-100% of cases, 99%-100% of cases, and 54%-87% of cases, respectively, depending on the imaginary part. The numbers represent measurement uncertainties of up to 15%. If we target 20% retrieval accuracy, the numbers of cases that fall within that threshold are 36%-76% for effective radius, 36%-73% for volume concentration, 98%-100% for surface-area concentration, and 37%-61% for number concentration. That range of numbers again represents a spread in results for different values of the imaginary part. At present, we obtain an accuracy of (on average) 0.1 for the real part. A case study from the ORCALES field campaign is used to illustrate data products obtained with TiARA.

Advancement and demonstration of a perturbative retrieval technique for temperature profiling in the lower troposphere using differential absorption light detection and ranging

Global Estimation of Range Resolved Thermodynamic Profiles from MicroPulse Differential Absorption Lidar

Research on Atmospheric Temperature Fine Measurements from Near Surface to 60 Km Altitude Based on an Integrated LIDAR System

Radiometric Profiling of Temperature, Water Vapor and Cloud Liquid Water Using Various Inversion Methods

Development and Metrological Characterization of a Tunable Diode Laser Absorption Spectroscopy (TDLAS) Spectrometer for Simultaneous Absolute Measurement of Carbon Dioxide and Water Vapor

Atmospheric carbon dioxide profile detection with a continuous-wave differential absorption lidar

Design of a High-Spectral-resolution Lidar for Atmospheric Temperature Measurement Down to the Near Ground.

Imaging of atmospheric dispersion processes with Differential Absorption Lidar

Development of a Raman Temperature LiDAR with Low Energy and Small Aperture by Parameter Optimization

Retrieval and Analysis of Atmospheric Temperature Using a Rotational Raman Lidar Observation.

Atmosphere Temperature Profiling And A Fusion Algorithm Based On Polarization Hsrl And Mwr

The Microwave Temperature and Humidity Profiler: Description and Preliminary Results

An Economical Tunable-Diode Laser Spectrometer for Fast-Response Measurements of Water Vapor in the Atmospheric Boundary Layer

Retrieval algorithm development and product validation for TERRA/MOPITT

Rayleigh-Raman Scattering Lidar for Atmospheric Temperature Profiles Measurements

Improving CO2 Concentration Profile Measurements From a Ground-Based CO2-DIAL Through Conditional Adjustment

Absolute detection of atmospheric temperature by using a scanning Fabry-Pérot interferometer in high spectral resolution lidar

Correction of Temperature Influence on the Wind Retrieval from a Mobile Rayleigh Doppler Lidar

Synergetic use of IASI profile and TROPOMI total-column level 2 methane retrieval products

Automated, unsupervised inversion of multiwavelength lidar data with TiARA: assessment of retrieval performance of microphysical parameters using simulated data