Abstract:This paper highlights an experimental model proposed for the management of nuclear materials containing natural uranium and thorium salts, based on technical and legislative methods. The investigated nuclear materials originate from laboratory chemicals with expired validity, having as manufacturers companies specialized in the manufacture of laboratory substances such as: Merck, Chemapol, Sigma Aldrich, Bucharest Reagent. The experimental program refers to several issues of great importance in the waste and environmental management, such as: a) the processing of radioactive substances containing nuclear materials and radioactive waste represented by solid objects contaminated with radionuclides from the radioactive series of U-238 and Th-232; b) gamma dose rate measurement during handling and processing of open sources of ionized radiation; c) measurement of suspicious contamination of the operating personnel which handles the equipment, including the materials used in the processing of open sources of ionizing radiation; and d) the inventory of nuclear materials according to the chemical formula, the mass of chemical substance, the mass of the nuclear element in each container and type of packaging. For the good development of processing these open sources of ionizing radiation containing nuclear materials, the ALARA principle (As Low As Reasonably Achievable) was applied, which is fundamental to the principles of radiation protection. All the measurements for determining the gamma dose rate and suspicious contamination were performed with the aid of a CoMo 170 radiometric device produced by Nuvia Instruments Gmbh Germany, equipped with a 170x100 mm2 PL detector with zinc sulfide calibrated with the aid of C-14, Co-60, Cs-137, U-238 and Am-241 radioactive isotopes and an external probe containing a scintillating crystal with sodium iodide enriched with thallium calibrated with Cs-137.

Validation and improvement of curium radiochronometry to determine the model discharge date of spent nuclear fuels

Note on the potential to increase the accuracy of source term calculations for spent nuclear fuel

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Consistent criticality and radiation studies of Swiss spent nuclear fuel: The CS2M approach

Determination of the 243 Cm/244 Cm ratio alpha spectrometry and spectral deconvolution in environmental samples exposed to discharges from the nuclear fuel cycle

Nuclear data evaluation for decay heat analysis of spent nuclear fuel over 1–100 k year timescale

Spent fuel nondestructive assay integrated characterization from active neutron, passive neutron, and passive gamma

Monte Carlo based absolute efficiency calibration of power reactor spent fuel NDA measurements

Time-dependent variation of the neutron multiplication factor in spent fuel storage

Scaling factors for CANDU reactor waste: how reliable are they?

Fast neutron coincidence counter using scintillators for safeguards verification of the TRU/RE waste

Evaluation of the irradiation-averaged fission yield for burnup determination in spent fuel assays

Simplified Efficiency Calibration Methods for Scintillation Detectors Used in Nuclear Remediation

Design and validation of a gamma-ray scanning system for measuring irradiated nuclear fuel

Management of nuclear materials containing natural uranium and thorium salts

Matrix effect correction in active neutron interrogation for residual fissile mass assessment in radioactive waste drums

Neutron Measurements and Monte Carlo Simulations of Spent Nuclear Fuel in Dry Cask Storage Using a New Remote Monitoring System Prototype

Verifying Spent Fuel Containers Before Deep Geological Storage with Cosmic Ray Muons

Neutron Activation of Structural Materials of a Dry Storage System for Spent Nuclear Fuel and Implications for Radioactive Waste Management

Geant4 model validation of Compton suppressed system for process monitoring of spent fuel

The Effects of Irradiation on Structure and Leaching of Pure and Doped Thin-Film Ceria SIMFUEL Models Prepared via Polymer-Templated Deposition