Custom liver models to aid surgeons

Ariane Vartanian

DOI: https://doi.org/10.1038/s41578-024-00646-5

IF: 83.5

2024-01-06

Nature Reviews Materials

Abstract:An article in Nature Communications reports 3D-printed personalized liver models that can self-heal and are as soft as real livers.

materials science, multidisciplinary,nanoscience & nanotechnology

What problem does this paper attempt to address?

3D printing of self-healing personalized liver models for surgical training and preoperative planning

Yahui Lu,Xing Chen,Fang Han,Qian Zhao,Tao Xie,Jingjun Wu,Yuhua Zhang

DOI: https://doi.org/10.1038/s41467-023-44324-6

IF: 16.6

2023-12-19

Nature Communications

Abstract:Abstract 3D printing can produce intuitive, precise, and personalized anatomical models, providing invaluable support for precision medicine, particularly in areas like surgical training and preoperative planning. However, conventional 3D printed models are often significantly more rigid than human organs and cannot undergo repetitive resection, which severely restricts their clinical value. Here we report the stereolithographic 3D printing of personalized liver models based on physically crosslinked self-healing elastomers with liver-like softness. Benefiting from the short printing time, the highly individualized models can be fabricated immediately following enhanced CT examination. Leveraging the high-efficiency self-healing performance, these models support repetitive resection for optimal trace through a trial-and-error approach. At the preliminary explorative clinical trial (NCT06006338), a total of 5 participants are included for preoperative planning. The primary outcomes indicate that the negative surgery margins are achieved and the unforeseen injuries of vital vascular structures are avoided. The 3D printing of liver models can enhance the safety of hepatic surgery, demonstrating promising application value in clinical practice.

multidisciplinary sciences
Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training

Arnau Valls-Esteve,Aitor Tejo-Otero,Pamela Lustig-Gainza,Irene Buj-Corral,Felip Fenollosa-Artés,Josep Rubio-Palau,Ignasi Barber-Martinez de la Torre,Josep Munuera,Constantino Fondevila,Lucas Krauel

DOI: https://doi.org/10.3390/gels9040339

IF: 4.6

2023-04-17

Gels

Abstract:Background: Pre-surgical simulation-based training with three-dimensional (3D) models has been intensively developed in complex surgeries in recent years. This is also the case in liver surgery, although with fewer reported examples. The simulation-based training with 3D models represents an alternative to current surgical simulation methods based on animal or ex vivo models or virtual reality (VR), showing reported advantages, which makes the development of realistic 3D-printed models an option. This work presents an innovative, low-cost approach for producing patient-specific 3D anatomical models for hands-on simulation and training. Methods: The article reports three paediatric cases presenting complex liver tumours that were transferred to a major paediatric referral centre for treatment: hepatoblastoma, hepatic hamartoma and biliary tract rhabdomyosarcoma. The complete process of the additively manufactured liver tumour simulators is described, and the different steps for the correct development of each case are explained: (1) medical image acquisition; (2) segmentation; (3) 3D printing; (4) quality control/validation; and (5) cost. A digital workflow for liver cancer surgical planning is proposed. Results: Three hepatic surgeries were planned, with 3D simulators built using 3D printing and silicone moulding techniques. The 3D physical models showed highly accurate replications of the actual condition. Additionally, they proved to be more cost-effective in comparison with other models. Conclusions: It is demonstrated that it is possible to manufacture accurate and cost-effective 3D-printed soft surgical planning simulators for treating liver cancer. The 3D models allowed for proper pre-surgical planning and simulation training in the three cases reported, making it a valuable aid for surgeons.

polymer science
The Long Road to Develop Custom-built Livers: Current Status of 3D Liver Bioprinting

Arthur A Cross-Najafi,Kristine Farag,Angela M Chen,Lester J Smith,Wenjun Zhang,Ping Li,Burcin Ekser

DOI: https://doi.org/10.1097/TP.0000000000004668

2024-02-01

Transplantation

Abstract:Although liver transplantation is the gold-standard therapy for end-stage liver disease, the shortage of suitable organs results in only 25% of waitlisted patients undergoing transplants. Three-dimensional (3D) bioprinting is an emerging technology and a potential solution for personalized medicine applications. This review highlights existing 3D bioprinting technologies of liver tissues, current anatomical and physiological limitations to 3D bioprinting of a whole liver, and recent progress bringing this innovation closer to clinical use. We reviewed updated literature across multiple facets in 3D bioprinting, comparing laser, inkjet, and extrusion-based printing modalities, scaffolded versus scaffold-free systems, development of an oxygenated bioreactor, and challenges in establishing long-term viability of hepatic parenchyma and incorporating structurally and functionally robust vasculature and biliary systems. Advancements in liver organoid models have also increased their complexity and utility for liver disease modeling, pharmacologic testing, and regenerative medicine. Recent developments in 3D bioprinting techniques have improved the speed, anatomical, and physiological accuracy, and viability of 3D-bioprinted liver tissues. Optimization focusing on 3D bioprinting of the vascular system and bile duct has improved both the structural and functional accuracy of these models, which will be critical in the successful expansion of 3D-bioprinted liver tissues toward transplantable organs. With further dedicated research, patients with end-stage liver disease may soon be recipients of customized 3D-bioprinted livers, reducing or eliminating the need for immunosuppressive regimens.
Insight to Biofabrication of Liver Microtissues for Disease Modeling: Challenges and Opportunities

Hengameh Dortaj,Negar Azarpira,Sara Pakbaz

DOI: https://doi.org/10.2174/011574888X257744231009071810

Abstract:In the last decade, liver diseases with high mortality rates have become one of the most important health problems in the world. Organ transplantation is currently considered the most effective treatment for compensatory liver failure. An increasing number of patients and shortage of donors has led to the attention of reconstructive medicine methods researchers. The biggest challenge in the development of drugs effective in chronic liver disease is the lack of a suitable preclinical model that can mimic the microenvironment of liver problems. Organoid technology is a rapidly evolving field that enables researchers to reconstruct, evaluate, and manipulate intricate biological processes in vitro. These systems provide a biomimetic model for studying the intercellular interactions necessary for proper organ function and architecture in vivo. Liver organoids, formed by the self-assembly of hepatocytes, are microtissues and can exhibit specific liver characteristics for a long time in vitro. Hepatic organoids are identified as an impressive tool for evaluating potential cures and modeling liver diseases. Modeling various liver diseases, including tumors, fibrosis, non-alcoholic fatty liver, etc., allows the study of the effects of various drugs on these diseases in personalized medicine. Here, we summarize the literature relating to the hepatic stem cell microenvironment and the formation of liver Organoids.
Hybrid Additive Fabrication of a Transparent Liver with Biosimilar Haptic Response for Preoperative Planning

Paolo Aseni,Tommaso Santaniello,Francesco Rizzetto,Lorenzo Gentili,Federico Pezzotta,Francesco Cavaliere,Maurizio Vertemati,Paolo Milani

DOI: https://doi.org/10.3390/diagnostics11091734

IF: 3.6

2021-09-21

Diagnostics

Abstract:Due to the complexity of liver surgery, the interest in 3D printing is constantly increasing among hepatobiliary surgeons. The aim of this study was to produce a patient-specific transparent life-sized liver model with tissue-like haptic properties by combining additive manufacturing and 3D moulding. A multistep pipeline was adopted to obtain accurate 3D printable models. Semiautomatic segmentation and registration of routine medical imaging using 3D Slicer software allowed to obtain digital objects representing the structures of interest (liver parenchyma, vasculo-biliary branching, and intrahepatic lesion). The virtual models were used as the source data for a hybrid fabrication process based on additive manufacturing using soft resins and casting of tissue-mimicking silicone-based blend into 3D moulds. The model of the haptic liver reproduced with high fidelity the vasculo-biliary branching and the relationship with the intrahepatic lesion embedded into the transparent parenchyma. It offered high-quality haptic perception and a remarkable degree of surgical and anatomical information. Our 3D transparent model with haptic properties can help surgeons understand the spatial changes of intrahepatic structures during surgical manoeuvres, optimising preoperative surgical planning.

medicine, general & internal
A Functional Human Liver Tissue Model: 3D Bioprinted Co-culture Discoids

Vignesh Subramaniam,Carolina Abrahan,Brett Higgins,Steven J. Chisolm,Baleigh Sweeney,Senthilkumar Duraivel,Leandro Balzano-Nogueira,Glyn D. Palmer,Thomas E. Angelini

2024-12-31

Abstract:To reduce costs and delays related to developing new and effective drugs, there is a critical need for improved human liver tissue models. Here we describe an approach for 3D bioprinting functional human liver tissue models, in which we fabricate disc-shaped structures (discoids) 200 {\mu}m in thickness and 1-3 mm in diameter, embedded in a highly permeable support medium made from packed microgels. We demonstrate that the method is precise, accurate, and scalable; up to 100 tissues per hour can be manufactured with a variability and error in diameter of about 4%. Histologic and immunohistochemical evaluation of printed discs reveal self-organization, cell cohesion, and key liver marker expression. During the course of 3-4 weeks in culture, the tissues stably synthesize albumin and urea at high levels, outperforming spheroid tissue models. We find the tissues express more than 100 genes associated with molecular absorption, distribution, metabolism, and excretion (ADME) at levels within the range of human liver. The liver tissue models exhibit enzymatic formation of metabolites after exposure to multiple test compounds. Together, these results demonstrate the promise of 3D printed discoids for pharmacological and toxicological applications.

Soft Condensed Matter,Biological Physics,Tissues and Organs
Customized liver organoids as an advanced in vitro modeling and drug discovery platform for non-alcoholic fatty liver diseases

Dong Wook Han,KangHe Xu,Zhe-Long Jin,Yong-Nan Xu,Ying-Hua Li,Lin Wang,Qilong Cao,Kee-Pyo Kim,DongHee Ryu,Kwonho Hong,Nam-Hyung Kim

DOI: https://doi.org/10.7150/ijbs.85145

2023-07-09

Abstract:Non-alcoholic fatty liver disease (NAFLD) and its progressive form non-alcoholic steatohepatitis (NASH) have presented a major and common health concern worldwide due to their increasing prevalence and progressive development of severe pathological conditions such as cirrhosis and liver cancer. Although a large number of drug candidates for the treatment of NASH have entered clinical trial testing, all have not been released to market due to their limited efficacy, and there remains no approved treatment for NASH available to this day. Recently, organoid technology that produces 3D multicellular aggregates with a liver tissue-like cytoarchitecture and improved functionality has been suggested as a novel platform for modeling the human-specific complex pathophysiology of NAFLD and NASH. In this review, we describe the cellular crosstalk between each cellular compartment in the liver during the pathogenesis of NAFLD and NASH. We also summarize the current state of liver organoid technology, describing the cellular diversity that could be recapitulated in liver organoids and proposing a future direction for liver organoid technology as an in vitro platform for disease modeling and drug discovery for NAFLD and NASH.
3D Liver Tissue Model with Branched Vascular Networks by Multimaterial Bioprinting (adv. Healthcare Mater. 23/2021)

Xin Liu,Xinhuan Wang,Liming Zhang,Lulu Sun,Heran Wang,Hao Zhao,Zhengtao Zhang,Wenli Liu,Yiming Huang,Shen Ji,Jingjinqiu Zhang,Kai Li,Biaobiao Song,Chun Li,Hui Zhang,Song Li,Shu Wang,Xiongfei Zheng,Qi Gu

DOI: https://doi.org/10.1002/adhm.202170114

IF: 10

2021-01-01

Advanced Healthcare Materials

Abstract:3D Bioprinting In article number 2101405 by Shu Wang, Xiongfei Zheng, Qi Gu, and co-workers, a bioprinting methodology with multistage-temperature-control is developed, producing centimeter-scale vascularized soft tissues containing branched endothelialized vasculatures and well-formed 3D capillary networks. It ensures cellular activities and then mimics mature and functional liver tissue.
3D Liver Tissue Model with Branched Vascular Networks by Multimaterial Bioprinting

Xin Liu,Xinhuan Wang,Liming Zhang,Lulu Sun,Heran Wang,Hao Zhao,Zhengtao Zhang,Wenli Liu,Yiming Huang,Shen Ji,Jingjinqiu Zhang,Kai Li,Biaobiao Song,Chun Li,Hui Zhang,Song Li,Shu Wang,Xiongfei Zheng,Qi Gu

DOI: https://doi.org/10.1002/adhm.202101405

IF: 10

2021-10-20

Advanced Healthcare Materials

Abstract:Complicated vessels pervade almost all body tissues and influence the pathophysiology of the human body significantly. However, current fabrication strategies have limited success at multi-scale vascular biofabrication. This study reports a methodology to fabricate soft vascularized tissue at centimeter-scale using multi-material bioprinting by a customized multistage-temperature-control printer. The printed constructs could be perfused via the branched endothelialized vasculatures to support the well-formed 3D capillary networks, which would ensure cellular activities with sufficient nutrient supply and then mimic a mature and functional liver tissue in terms of synthesis of liver-specific proteins. Moreover, an inner and external pressure-bearing layer was printed to support the direct surgical anastomosis of the carotid artery to the jugular vein. In summary, we present a versatile platform to recapitulate the vasculature network, in which case sustaining the optimal cellularization in engineered tissues is achievable.This article is protected by copyright. All rights reserved

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Advancements in Research on Constructing Physiological and Pathological Liver Models and Their Applications Utilizing Bioprinting Technology

Zibei Ming,Xinyu Tang,Jing Liu,Banfeng Ruan

DOI: https://doi.org/10.3390/molecules28093683

IF: 4.6

2023-04-25

Molecules

Abstract:In recent decades, significant progress has been made in liver tissue engineering through the use of 3D bioprinting technology. This technology offers the ability to create personalized biological structures with precise geometric design capabilities. The complex and multifaceted nature of liver diseases underscores the need for advanced technologies to accurately mimic the physiological and mechanical characteristics, as well as organ-level functions, of liver tissue in vitro. Bioprinting stands out as a superior option over traditional two-dimensional cell culture models and animal models due to its stronger biomimetic advantages. Through the use of bioprinting, it is possible to create liver tissue with a level of structural and functional complexity that more closely resembles the real organ, allowing for more accurate disease modeling and drug testing. As a result, it is a promising tool for restoring and replacing damaged tissue and organs in the field of liver tissue engineering and drug research. This article aims to present a comprehensive overview of the progress made in liver tissue engineering using bioprinting technology to provide valuable insights for researchers. The paper provides a detailed account of the history of liver tissue engineering, highlights the current 3D bioprinting methods and bioinks that are widely used, and accentuates the importance of existing in vitro liver tissue models based on 3D bioprinting and their biomedical applications. Additionally, the article explores the challenges faced by 3D bioprinting and predicts future trends in the field. The progress of 3D bioprinting technology is poised to bring new approaches to printing liver tissue in vitro, while offering powerful tools for drug development, testing, liver disease modeling, transplantation, and regeneration, which hold great academic and practical significance.

chemistry, multidisciplinary,biochemistry & molecular biology
3D Printing for Liver Tissue Engineering: Current Approaches and Future Challenges

Phillip L. Lewis,Ramille N. Shah

DOI: https://doi.org/10.1007/s40472-016-0084-y

2016-01-22

Current Transplantation Reports

Abstract:Recent developments in 3D printing have greatly accelerated progress in the field of liver tissue engineering by enabling the fabrication of more tissue-mimetic structures capable of restoring function. A variety of 3D printing and additive manufacturing techniques ranging from stereolithography to direct ink writing have shown great promise in liver tissue engineering and the study of cellular interactions. Despite these advances, however, there is significant room for improvement. Furthermore, because of the enormous capabilities of 3D printing, methods to analyze complex heterogeneous tissues in vitro have yet to be perfected. Investigations into the ability of 3D printing to recreate the macro- and microstructural components of the liver are still in their infancy. These specific issues need to be addressed in combination with massive scale up if 3D-printed tissue-engineered livers are to reach clinical relevance.

English Else
Current Advances on 3D‐Bioprinted Liver Tissue Models

Liang Ma,Yutong Wu,Yuting Li,Abdellah Aazmi,Hongzhao Zhou,Bin Zhang,Huayong Yang

DOI: https://doi.org/10.1002/adhm.202001517

IF: 10

2020-10-19

Advanced Healthcare Materials

Abstract:<p>The liver, the largest gland in the human body, plays a key role in metabolism, bile production, detoxification, and water and electrolyte regulation. The toxins or drugs that the gastrointestinal system absorbs reach the liver first before entering the bloodstream. Liver disease is one of the leading causes of death worldwide. Therefore, an in vitro liver tissue model that reproduces the main functions of the liver can be a reliable platform for investigating liver diseases and developing new drugs. In addition, the limitations in traditional, planar monolayer cell cultures and animal tests for evaluating the toxicity and efficacy of drug candidates can be overcome. Currently, the newly emerging 3D bioprinting technologies have the ability to construct in vitro liver tissue models both in static scaffolds and dynamic liver‐on‐chip manners. This review mainly focuses on the construction and applications of liver tissue models based on 3D bioprinting. Special attention is given to 3D bioprinting strategies and bioinks for constructing liver tissue models including the cell sources and hydrogel selection. In addition, the main advantages and limitations and the major challenges and future perspectives are discussed, paving the way for the next generation of in vitro liver tissue models.</p>

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Bioprinting of hepatic tissue using 3D technology: Transitioning beyond laboratory models to real-world applications in medical treatments

Suraj Kumar,Rishabha Malviya

DOI: https://doi.org/10.1016/j.apmt.2024.102307

IF: 8.663

2024-08-01

Applied Materials Today

Abstract:This study discusses the potential for mending portions or entire hepatic to cure persistent liver disease. Fabricating functioning organs is the ultimate objective of tissue science, and this study highlights the possibility of being accomplished. The liver, the most significant gland in the human body, serves as accountable for a wide range of metabolism-related processes and activities. Persistent liver failure is a prevalent cause of mortality worldwide, and the currently prevalent technique of organ transplantation has challenges. Therefore, it is necessary to develop an artificial liver model in the laboratory that accurately replicates the natural surroundings. The generated model should be dependable in comprehending the etiology, evaluating medications, and aiding in the restoration and substitution of the impaired liver. 3-D bioprinting is a promising method that develops an in vitro model that closely resembles the in vivo environment, with the ultimate aim of being used for transplantation by tissue engineers. The technique has significant promise as a result of its exact manipulation and its capacity to uniformly disperse cells across all levels inside an intricate framework. This study provides a comprehensive examination of liver tissue engineering, specifically highlighting the use of three-dimensional bioprinting and bio-inks for liver disease models and pharmaceutical screening.

materials science, multidisciplinary
Microfabrication of liver and heart tissues for drug development

Grace E. Brown,Salman R. Khetani

DOI: https://doi.org/10.1098/rstb.2017.0225

2018-05-21

Abstract:Drug-induced liver- and cardiotoxicity remain among the leading causes of preclinical and clinical drug attrition, marketplace drug withdrawals and black-box warnings on marketed drugs. Unfortunately, animal testing has proven to be insufficient for accurately predicting drug-induced liver- and cardiotoxicity across many drug classes, likely due to significant differences in tissue functions across species. Thus, the field of in vitro human tissue engineering has gained increasing importance over the last 10 years. Technologies such as protein micropatterning, microfluidics, three-dimensional scaffolds and bioprinting have revolutionized in vitro platforms as well as increased the long-term phenotypic stability of both primary cells and stem cell-derived differentiated cells. Here, we discuss advances in engineering approaches for constructing in vitro human liver and heart models with utility for drug development. Design features and validation data of representative models are presented to highlight major trends followed by the discussion of pending issues. Overall, bioengineered liver and heart models have significantly advanced our understanding of organ function and injury, which will prove useful for mitigating the risk of drug-induced organ toxicity to human patients, reducing animal usage for preclinical drug testing, aiding in the discovery of novel therapeutics against human diseases, and ultimately for applications in regenerative medicine. This article is part of the theme issue ‘Designer human tissue: coming to a lab near you’.
Three-dimensional Modeling in Complex Liver Surgery and Liver Transplantation

Jian-Peng Liu,Jan Lerut,Zhe Yang,Ze-Kuan Li,Shu-Sen Zheng

DOI: https://doi.org/10.1016/j.hbpd.2022.05.012

2022-01-01

Abstract:Liver resection and transplantation are the most effective therapies for many hepatobiliary tumors and diseases. However, these surgical procedures are challenging due to the anatomic complexity and many anatomical variations of the vascular and biliary structures. Three-dimensional (3D) printing models can clearly locate and describe blood vessels, bile ducts and tumors, calculate both liver and residual liver volumes, and finally predict the functional status of the liver after resection surgery. The 3D printing models may be particularly helpful in the preoperative evaluation and surgical planning of especially complex liver resection and transplantation, allowing to possibly increase resectability rates and reduce postoperative complications. With the continuous developments of imaging techniques, such models are expected to become widely applied in clinical practice.
3D Printing of a Vascularized Mini‐Liver Based on the Size‐Dependent Functional Enhancements of Cell Spheroids for Rescue of Liver Failure (adv. Sci. 17/2024)

Jiabin Zhang,Xiaodie Chen,Yurong Chai,Chenya Zhuo,Yanteng Xu,Tiantian Xue,Dan Shao,Yu Tao,Mingqiang Li

DOI: https://doi.org/10.1002/advs.202470093

IF: 15.1

2024-01-01

Advanced Science

Abstract:Advanced ScienceVolume 11, Issue 17 2470093 Cover PictureOpen Access 3D Printing of a Vascularized Mini-Liver Based on the Size-Dependent Functional Enhancements of Cell Spheroids for Rescue of Liver Failure (Adv. Sci. 17/2024) Jiabin Zhang, Jiabin ZhangSearch for more papers by this authorXiaodie Chen, Xiaodie ChenSearch for more papers by this authorYurong Chai, Yurong ChaiSearch for more papers by this authorChenya Zhuo, Chenya ZhuoSearch for more papers by this authorYanteng Xu, Yanteng XuSearch for more papers by this authorTiantian Xue, Tiantian XueSearch for more papers by this authorDan Shao, Dan ShaoSearch for more papers by this authorYu Tao, Yu TaoSearch for more papers by this authorMingqiang Li, Mingqiang LiSearch for more papers by this author Jiabin Zhang, Jiabin ZhangSearch for more papers by this authorXiaodie Chen, Xiaodie ChenSearch for more papers by this authorYurong Chai, Yurong ChaiSearch for more papers by this authorChenya Zhuo, Chenya ZhuoSearch for more papers by this authorYanteng Xu, Yanteng XuSearch for more papers by this authorTiantian Xue, Tiantian XueSearch for more papers by this authorDan Shao, Dan ShaoSearch for more papers by this authorYu Tao, Yu TaoSearch for more papers by this authorMingqiang Li, Mingqiang LiSearch for more papers by this author First published: 08 May 2024 https://doi.org/10.1002/advs.202470093AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onEmailFacebookTwitterLinkedInRedditWechat Graphical Abstract 3D Printing of a Vascularized Mini-Liver In article number 2309899, Yu Tao, Mingqiang Li, and co-workers report the superior hepatic differentiation and pro-angiogenic effects of human mesenchymal stromal/stem cell spheroids. Moreover, coculture with hexagonally and coaxially patterned endothelial cells further contributes to the production of hepatocyte-like cells. Leveraging these significant benefits, a vascularized hepatic lobule-like mini-liver is fabricated by 3D bioprinting, demonstrating effective treatment of acute liver failure. Volume11, Issue17May 8, 20242470093 RelatedInformation
Three-dimensional Printing-Driving Liver Therapies

Xiaohong Li,Liang Wen,Jiao Liu,Xiaohong Wang

DOI: https://doi.org/10.2174/0929867328666210419124246

IF: 4.74

2021-01-01

Current Medicinal Chemistry

Abstract:End-stage liver diseases have long been a threat to human health, and so far, the treatment of these diseases lacks effective means. Allogenic organ transplantation has become the last straw for most of the patients with end-stage liver diseases. However, this technique has been greatly limited by the serious shortage of donors and other factors, such as immune rejection, drug syndrome, and high cost. Recently, the emergence of three-dimensional (3D) bioprinting technologies, together with the magnetic resonance imaging (MRI) and computed tomography (CT) techniques, has driven the rapid growth of this field toward liver therapies. There are several basic requirements for liver 3D bioprinting. From information collection of diseased livers, to 3D printing of liver substitutes (containing the major structural, material and functional characters), and to clinical applications, suitable 'bioinks' and 'bioprinters' have played essential roles. In this review, we highlight the advanced 'bioinks' and 'bioprinters' that have been used for vascularized and innervated liver tissue 3D bioprinting. Further studies for the incorporation of biliary networks in the bioartificial livers have been emphasized. It is expected that when all the bottle-neck problems for liver 3D bioprinting are solved, batch (i.e. mass) and personalized production of bioartificial livers will make it very easy to treat end-stage liver diseases.
Development of a flexible liver phantom for hepatocellular carcinoma treatment planning: a useful tool for training & education

Abdulla Al-Thani,Abdulrahman Sharif,Sami El Borgi,Shameel Abdulla,Mahmoud Raja Ahmed Saleh,Reem Al-Khal,Carlos Velasquez,Omar Aboumarzouk,Sarada Prasad Dakua

DOI: https://doi.org/10.1186/s41205-024-00228-9

2024-07-22

Abstract:Purpose: Hepatocellular carcinoma (HCC) is one of the most common types of liver cancer that could potentially be surrounded by healthy arteries or veins that a surgeon would have to avoid during treatment. A realistic 3D liver model is an unmet need for HCC preoperative planning. Methods: This paper presents a method to create a soft phantom model of the human liver with the help of a 3D-printed mold, silicone, ballistic gel, and a blender. Results: For silicone, the elastic modulus of seven different ratios of base silicone and silicone hardener are tested; while for ballistic gel, a model using 20% gelatin and 10% gelatin is created for the tumor and the rest of the liver, respectively. It is found that the silicone modulus of elasticity matches with the real liver modulus of elasticity. It is also found that the 10% gelatin part of the ballistic gel model is an excellent emulation of a healthy human liver. Conclusion: The 3D flexible liver phantom made from a 10% gelatin-to-water mixture demonstrates decent fidelity to real liver tissue in terms of texture and elasticity. It holds significant potential for improving medical training, preoperative planning, and surgical research. We believe that continued development and validation of such models could further enhance their utility and impact in the field of hepatobiliary treatment planning and education.
Three-dimensional bio-printing of primary human hepatocellular carcinoma for personalized medicine

Feihu Xie,Lejia Sun,Yuan Pang,Gang Xu,Bao Jin,Haifeng Xu,Xin Lu,Yiyao Xu,Shunda Du,Yanan Wang,Shi Feng,Xinting Sang,Shouxian Zhong,Xin Wang,Wei Sun,Haitao Zhao,Hongbing Zhang,Huayu Yang,Pengyu Huang,Yilei Mao

DOI: https://doi.org/10.1016/j.biomaterials.2020.120416

IF: 14

2021-01-01

Biomaterials

Abstract:<p>Hepatocellular carcinoma (HCC) is one of the most lethal tumors worldwide. This study aims to address the lack of faithful and available in vitro models for patient-specific drug screening for HCC. We recently established a novel modeling system using three-dimensional (3D) bioprinting technology and constructed hepatorganoids with HepaRG cells, which retain the liver function and prolong the survival of mice with liver failure after abdominal transplantation. Here we extend this modeling system to establish individualized model for hepatocellular carcinoma. HCC specimens were obtained from six patients after surgery. Primary HCC cells were isolated and mixed with gelatin and sodium alginate to form the bioink for printing. Patient-derived three-dimensional bio-printed HCC (3DP-HCC) models were successfully established afterward and grew well during long-term culture. These models retained the features of parental HCCs, including stable expression of the biomarker, stable maintenances of the genetic alterations and expression profiles. 3DP-HCC models are capable of displaying the results of drug screening intuitively and quantitatively. In conclusion, 3DP-HCC models are faithful in vitro models that are reliable in long-term culture and able to predict patient-specific drugs for personalized treatment.</p>

engineering, biomedical,materials science, biomaterials
Unconventional strategies for liver tissue engineering: plant, paper, silk and nanomaterial-based scaffolds

Sanyam Jain,Jai Gopal Sharma

DOI: https://doi.org/10.1080/17460751.2024.2378615

Abstract:The paper highlights how significant characteristics of liver can be modeled in tissue-engineered constructs using unconventional scaffolds. Hepatic lobular organization and metabolic zonation can be mimicked with decellularized plant structures with vasculature resembling a native-hepatic lobule vascular arrangement or silk blend scaffolds meticulously designed for guided cellular arrangement as hepatic patches or metabolic activities. The functionality of hepatocytes can be enhanced and maintained for long periods in naturally fibrous structures paving way for bioartificial liver development. The phase I enzymatic activity in hepatic models can be raised exploiting the microfibrillar structure of paper to allow cellular stacking creating hypoxic conditions to induce in vivo-like xenobiotic metabolism. Lastly, the paper introduces amalgamation of carbon-based nanomaterials into existing scaffolds in liver tissue engineering.

Custom liver models to aid surgeons

3D printing of self-healing personalized liver models for surgical training and preoperative planning

Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training

The Long Road to Develop Custom-built Livers: Current Status of 3D Liver Bioprinting

Insight to Biofabrication of Liver Microtissues for Disease Modeling: Challenges and Opportunities

Hybrid Additive Fabrication of a Transparent Liver with Biosimilar Haptic Response for Preoperative Planning

A Functional Human Liver Tissue Model: 3D Bioprinted Co-culture Discoids

Customized liver organoids as an advanced in vitro modeling and drug discovery platform for non-alcoholic fatty liver diseases

3D Liver Tissue Model with Branched Vascular Networks by Multimaterial Bioprinting (adv. Healthcare Mater. 23/2021)

3D Liver Tissue Model with Branched Vascular Networks by Multimaterial Bioprinting

Advancements in Research on Constructing Physiological and Pathological Liver Models and Their Applications Utilizing Bioprinting Technology

3D Printing for Liver Tissue Engineering: Current Approaches and Future Challenges

Current Advances on 3D‐Bioprinted Liver Tissue Models

Bioprinting of hepatic tissue using 3D technology: Transitioning beyond laboratory models to real-world applications in medical treatments

Microfabrication of liver and heart tissues for drug development

Three-dimensional Modeling in Complex Liver Surgery and Liver Transplantation

3D Printing of a Vascularized Mini‐Liver Based on the Size‐Dependent Functional Enhancements of Cell Spheroids for Rescue of Liver Failure (adv. Sci. 17/2024)

Three-dimensional Printing-Driving Liver Therapies

Development of a flexible liver phantom for hepatocellular carcinoma treatment planning: a useful tool for training & education

Three-dimensional bio-printing of primary human hepatocellular carcinoma for personalized medicine

Unconventional strategies for liver tissue engineering: plant, paper, silk and nanomaterial-based scaffolds