Abstract:Microcrystalline cellulose (MCC) was successfully synthesized from sugarcane bagasse using a rapid, low-temperature hydrochloric acid (HCl) gas treatment. The primary aim was to develop an energy-efficient "green" cellulose extraction process. Response surface methodology optimized the liquid-phase hydrolysis conditions to 3.3 % HCl at 117 °C for 127 min to obtain MCC with 350 degree of polymerization. An alternative gas-phase approach utilizing gaseous HCl diluted in hot 40 °C air was proposed to accelerate MCC production. The cellulose pulp was moistened to 15–18 % moisture content and then exposed to HCl gas, which was absorbed by the moisture in the cellulose fibers to generate a highly concentrated acidic solution that hydrolyzed the cellulose. The cellulose pulp was isolated from depithed bagasse through soda pulping, multistage bleaching and cold alkali purification. Hydrolysis was conducted by saturating the moist cellulose fibers with gaseous HCl mixed with hot air. Extensive analytical characterization using FT-IR, XRD, SEM, TGA, DSC, particle size, and porosity analyses verified comparable physicochemical attributes between MCC samples prepared via liquid and gas phase methods. The gas-produced MCC revealed 85% crystallinity, 71 Å crystallite dimensions, and thermally stable rod-shaped morphology with an average diameter below 200 μm. The similar material properties validate the proposed gas-based technique as an equally effective yet more energy-efficient alternative to conventional aqueous acid hydrolysis for fabricating highly pure MCC powders from lignocellulose. This sustainable approach enables the value-addition of sugarcane bagasse agro-industrial residue into cellulosic nanomaterials for wide-ranging industrial applications. In summary, the key achievements of this work are rapid MCC production under mild temperatures using HCl gas, optimization of liquid phase hydrolysis, successful demonstration of gas phase method, and extensive characterization verifying equivalence between both protocols. The gas methodology offers a greener cellulose extraction process from biomass.

Sustainable Production of Microcrystalline Cellulose Through Gas Phase Hydrolysis for Pharmaceutical Applications: Characterization and Life Cycle Assessment

Comparative study on liquid versus gas phase hydrochloric acid hydrolysis for microcrystalline cellulose isolation from sugarcane bagasse

One-pot Conversion of Cellulose to HMF under Mild Conditions Through Decrystallization and Dehydration in Dimethyl Sulfoxide/tetraethylammonium Chloride

Extraction and Characterization of Microcrystalline Cellulose from Walnut, Almond and Apricot Stone Shells

Extraction and Characterization of Microcrystalline Cellulose from Lagenaria siceraria Fruit Pedicles

Study on Treating with Acid and Surface Modification by Acetic Anhydride for Cellulose

Sustainable Production of Carboxymethyl Cellulose: A Biopolymer Alternative from Sugarcane (Saccharum officinarum L.) Leaves

Selective Microcrystalline Cellulose Extraction from Chinese Medicine Residues via Direct PMS Oxidation

From Field to Pharmacy: Isolation, Characterization and Tableting Behaviour of Microcrystalline Cellulose from Wheat and Corn Harvest Residues

Preparation of microcrystalline cellulose from Rabdosia rubescens residue and study on its membrane properties

Biotransformation of Microcrystalline Cellulose from Rice Straw Waste using TGJPC-120 Bacteria and its Characterization

A Novel Method for Preparing Microcrystalline Cellulose from Bleached Chemical Pulp Using Transition Metal Ions Enhanced High Temperature Liquid Water Process.

Preparation of Microcrystalline Cellulose by Liquefaction of Eucalyptus Sawdust in Ethylene Glycol Catalyzed by Acidic Ionic Liquid

Effective degradation of cellulose by Microwave irradiation in alkaline solution

ANALYSIS OF THE FLOW OF A FIBROUS SUSPENSION IN A GRINDING PLANT IN THE PRODUCTION OF FINE CELLULOSE

Long-term medium chain carboxylic acids production from liquor -making wastewater: Parameters optimization and toxicity mitigation

Study Process of Microcrystalline Cellulose

Effects of the coagulation bath on the properties of regenerated carboxymethylated cellulose films

Isolation and Characterization of Microcrystalline Cellulose from Bamboo Pulp Through Extremely Low Acid Hydrolysis

Preparing lignin-rich microcrystalline cellulose from spruce chemithermomechanical pulp fiber by Fe3+ enhanced high temperature liquid water treatment

Techno-economic Analysis and Life Cycle Assessment of Manufacturing a Cellulose Nanocrystal-Based Hybrid Membrane