Abstract:Cellulose nanocrystals (CNCs) are clean and sustainable materials that have drawn significant attention in academia and industry because of their unique physicochemical properties. However, realizing economical and environmentally friendly production of CNCs remains a challenge. In this study, we proposed an innovative strategy to fabricate CNCs, which involves the acid hydrolysis pretreatment of wood cellulose fibers using innocuous and recyclable ferric chloride hexahydrate (FeCl3·6H2O). During the molten FeCl3·6H2O treatment, the degree of polymerization (DP) of the cellulose fibers sharply decreased, along with the transformation of cellulose I to cellulose II crystallites. Molten FeCl3·6H2O quickly hydrolyzed cellulose fibers within 5 min at 80 °C, inducing a rapid decrease in the DP from 922 to 196, and the water-insoluble solid (WIS) retention reached 80.1%. CNCs were successfully produced from the mechanical disintegration of the WIS with a low energy input. Hence, the yield of CNCs is consistent with that of the WIS. Interestingly, the CNCs exhibited typical cellulose II crystallites, which were significantly different from those of the cellulose feedstock (cellulose I). Detailed characterization revealed that the CNCs had tunable number-averaged heights of 10.4–26.9 nm and high thermal stability (a maximal weight loss temperature of 327 °C). Most notably, FeCl3·6H2O was easily recycled from the hydrolysate after hydrolysis, with a high recovery of 94.0–94.5 wt %, using simple concentration and crystallization technologies. Thus, this study proposes a novel production technology for CNCs that is both economical and eco-friendly, providing new ideas for clean and large-scale production of CNCs.

Cleaner production of cellulose nanocrystals and calcium sulfate whiskers: Process design and life cycle assessment

A COMPARATIVE STUDY OF CELLULOSE NANOWHISKERS (cnws) AND CELLULOSE NANOFIBERS (Cnfs)

Greener production of cellulose nanocrystals: An optimised design and life cycle assessment

Facile Modification and Application of Cellulose Nanocrystals

Advance Study of Cellulose Nanocrystals Properties and Applications

Cellulose Nanocrystal Preparation via Rapid Hydrolysis of Wood Cellulose Fibers Using Recyclable Molten Ferric Chloride Hexahydrate

Sustainable Production of Cellulose Nanocrystals with Sulfuric Acid Recycling Using Diffusion Dialysis and Electrodialysis

Preparation of Cellulose Nanocrystals by Synergistic Action of Ionic Liquid and Recyclable Solid Acid under Mild Conditions

Cellulose nanocrystals produced using recyclable sulfuric acid as hydrolysis media and their wetting molecular dynamics simulation

Extraction of cellulose nanocrystals using a recyclable deep eutectic solvent

High yielding, one-step mechano-enzymatic hydrolysis of cellulose to cellulose nanocrystals without bulk solvent

Preparation of high-aspect-ratio cellulose nanocrystals by solvothermal synthesis followed by mechanical exfoliation

Recycled ionic liquid vs . deep eutectic solvent in cellulose nanocrystals production: Characterization, techno-economic analysis, and life cycle assessment

Cellulose nanocrystals from lignocellulosic feedstock: a review of production technology and surface chemistry modification

Preparation of cellulose nanocrystals by ultrasonication-assisted phosphotungstic acid method: An effective method of high yield and friendly environment

Nanocrystalline cellulose derived from spruce wood: Influence of process parameters

Investigation of a Widely Applicable Process for Extracting Carboxyl-rich Cellulose Nanocrystal (CNC)

Thermo-mechano-chemical deconstruction of cellulose for cellulose nanocrystal production by reactive processing

Extraction and Surface Functionalization of Cellulose Nanocrystals from Sugarcane Bagasse

Preparation and characterization of cellulose nanocrystals from spent culture substrate of Auricularia auricula

Cellulose nanocrystals from agriculture and forestry biomass: synthesis methods, characterization and industrial applications