Abstract:Abstract Over the past two decades, researchers have advanced and employed integrated microfluidic circuitry to enable a wide range of chemical and biological ‘lab-on-a-chip’ capabilities. Yet in recent years, a wholly different field, soft robotics, has begun harnessing microfluidic circuitry as a promising means to enhance soft robot autonomy. Unfortunately, key challenges associated with not only the fabrication of microfluidic circuitry, but also its integration with soft robotic systems represent critical barriers to progress. To overcome such issues, here we present a strategy that leverages ‘ in situ direct laser writing ( is DLW)’—a submicron-scale additive manufacturing (or ‘three-dimensional (3D) printing’) approach developed previously by our group—to fabricate microfluidic circuit elements and soft microrobotic actuators directly inside of enclosed microchannels. In addition, we introduce ‘normally closed’ microfluidic transistors that comprise free-floating sealing discs designed to block source-to-drain fluid flow until the application of a target gate pressure. As an exemplar, we printed microfluidic transistors with distinct gate activation properties as well as identical soft microgrippers downstream of each drain within 40 μ m-tall microchannels. Experimental results for a source pressure of 100 kPa revealed that microgripper deformation was prevented in the absence of a gate input; however, increasing the gate pressure to 300 kPa induced actuation of one set of microgrippers, while a further increase to 400 kPa led to both sets of microgrippers actuating successfully. These results suggest that the presented is DLW-based strategy for manufacturing and integrating 3D microfluidic circuit elements and microrobotic end effectors could offer unique potential for emerging soft robotic applications.

Synergizing microfluidics with soft robotics: A perspective on miniaturization and future directions

Microfluidic Strategies in Soft Robotics: Actuators, Control Systems, and Pumps

Soft Pumps: Catalysts for Advancing Fluid‐Driven Soft Robots

Will microfluidics enable functionally integrated biohybrid robots?

A Review of Soft Microrobots: Material, Fabrication, and Actuation

Multicomponent and multifunctional integrated miniature soft robots

Fabrication strategy for micro soft robotics with semiconductor devices integration

Customizing a self-healing soft pump for robot

Pioneering healthcare with soft robotic devices: A review

Soft medical microrobots: Design components and system integration

Integrated 3D printed microfluidic circuitry and soft microrobotic actuators via in situ direct laser writing

Design and batch fabrication of anisotropic microparticles toward small-scale robots using microfluidics: recent advances

Recent advances in small-scale hydrogel-based robots for adaptive biomedical applications

Soft microswimmers: Material capabilities and biomedical applications

Soft tubular microfluidics for 2D and 3D applications

Soft Nanofluidic Machinery

Recent progress in soft robots: Principles, designs, and applications

Fabrication and Functionality Integration Technologies for Small‐scale Soft Robots

Advancements in materials, manufacturing, propulsion and localization: propelling soft robotics for medical applications

Hydrogels in Soft Robotics: Past, Present, and Future

The science of soft robot design: A review of motivations, methods and enabling technologies