Abstract:Linear Fresnel collector system is a type of solar thermal utilization installation. It is mainly used to focus solar radiation on the receiver tube to generate high temperature thermal energy which can be applied in many aspects. This study investigates five different types of receiver tube models using water as the flowing medium, which leads to improving heat transfer performance by means of being equipped with enhancers. The optical results and thermohydraulic performance of the Linear Fresnel collector system are evaluated through Monte Carlo Ray Tracing and Computational Fluid Dynamics (CFD) simulation methods. The obtained optical results reveal that the distribution of energy flux density concentrating on the receiver tube surpasses that of the parabolic trough collector system. In order to maintain an energy reception rate of 90.0% or higher, the installation height range of the receiver tube should be between 1468–1532 mm. When the sun-tracking error increases from 0.0° to 1.0°, the overall optical efficiency of the Linear Fresnel collector system decreases from 98.9% to 79.7%. The thermohydraulic performance shows that the enhancers can generate a swirling flow as its main feature, which effectively promotes the homogenization of the temperature field and destroys the boundary layer near the receiver tube wall, thus greatly improving the convective heat transfer in the receiver tube. However, the introduction of the enhancers also means that the pressure drop loss of the receiver tube increases. Furthermore, the impact of the Kenics mixer's enhancer on heat transfer and flow characteristics is further amplified as the rotation rate decreases, owing to its alternating and complex structure. Through a comparative analysis of the influence of different receiver tube models on Nusselt number (Nu), Frictional resistance coefficient ( f ) and comprehensive evaluation criterion (PEC) under four rotation rate conditions (y = 6.3, 8.1, 11.34, 18.9), the conclusions present that the receiver tube with an enhancer at a low rotation rate has a larger Nu than that at a high rotation rate, while the Frictional resistance coefficient changes little at different rotation rates. Therefore, the PEC is higher when the receiver tube is equipped with a low-rotation-rate enhancer. Moreover, the receiver tube equipped with a Kenics mixer at a rotation rate of 6.3 was found to be the overall optimum case, with the PEC value varying from 1.47 to 1.73.

Thermal efficiency and endurance enhancement of tubular solar receivers using functionally graded materials

A Practical Method to Evaluate the Thermal Efficiency of Solar Molten Salt Receivers

Experimental and Simulation Study of Mn–Fe Particles in a Controllable-Flow Particle Solar Receiver for High-Temperature Thermochemical Energy Storage

Thermal-hydraulic and Thermodynamic Performance of Parabolic Trough Solar Receiver Partially Fi Lled with Gradient Metal Foam

Coupled optical and thermal simulation of the thermal performance of a 50 MWe external cylindrical solar receiver

Concentrated Solar Power Tower Systems Coupled Locally with Spectrally Selective Coatings for Enhancement of Solar-Thermal Conversion and Economic Performance

Optimization and performance evaluation of a high-temperature solar receiver for concentrated solar power applications

Thermo-mechanical performance enhancement of volumetric solar receivers using graded porous absorbers

Negative Thermal-Flux Phenomenon and Regional Solar Absorbing Coating Improvement Strategy for the Next-Generation Solar Power Tower

A comprehensive methodology for the design of solar tower external receivers

An Optimized Model and Test of the China'S First High Temperature Parabolic Trough Solar Receiver

Coupled optical-thermal-stress characteristics of a multi-tube external molten salt receiver for the next generation concentrating solar power

Enhancing optical and thermohydraulic performance of linear Fresnel collectors with receiver tube enhancers: A numerical study

Thermal-fluid-mechanical analysis of tubular solar receiver panels using supercritical CO2 as heat transfer fluid under non-uniform solar flux distribution

Hydrothermal performance assessment of a parabolic trough with proposed conical solar receiver

Performance Enhancement of Parabolic Trough Collector by Using Homogenizer and Spiral

Parabolic Trough Collector with Internal Fractal Fins in Receiver to Increase Thermal Performance in Working Fluid

Thermal Performance and Thermal Stress Analysis of a 600 MWth Solar Cylinder External Receiver

Numerical investigation on heat transfer and thermoelastic stress in a solar cavity receiver

Thermal performance simulation of parabolic trough collector with ternary nanofluid flows and half-star-shaped fins inserts in different receivers

Thermal performance analysis of eccentric double-selective-coated parabolic trough receivers with flat upper surface