Abstract:Fiber optic Fabry-Perot interferometer is inherently suitable as the ultrasonic transducer for photoacoustic tomography due to its high sensitivity, broad bandwidth and small footprint. Interrogated by a narrow linewidth continuous wave laser, the sensor’s output power is modulated by the incident ultrasound. During the imaging process, the sensor’s sensitivity is maximized by locking the laser to a spectral point where the sensor’s reflectivity changes most rapidly with wavelength. Traditionally, one needs a fast tunable laser to scan the reflection spectrum of the sensor and subsequently lock the laser frequency to the proper spectral point using a feedback loop. The requirement of a wavelength-tunable, low-noise interrogation laser significantly raises system cost and inhibits parallel detection. In this paper, we present a fiber optic Fabry-Perot acoustic sensor whose reflection spectrum can be swiftly and robustly tuned using an economical visible diode laser. By controlling the power of the illumination laser, the temperature of the sensor cavity can be finely adjusted which leads to altered cavity length and shifted spectrum. With this technique, we are able to tune the spectrum by more than 10 nm with a precision less than 0.1 nm. The sensor was characterized to exhibit a flat frequency response up to 20 MHz and a noise-equivalent pressure below 200 Pa. This sensor can be batch-fabricated and its low cost and easy implementation make parallel detection feasible and affordable, potentially benefiting fast image acquisition. The performance of the sensor was demonstrated in multiple phantom and in vivo imaging experiments.

Acoustic Measurements Using a Fiber Optic Sensor System

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

A Comprehensive Study of Optical Fiber Acoustic Sensing

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

Analysis and Optimization of Acoustic Sensor Based on Fiber Fabry-Pérot Etalon

An Optical Acoustic Detection System Based on Fabry Pérot Etalon Stability Structure

High Sensitivity and High Stability Dual Fabry-Perot Interferometric Fiber-Optic Acoustic Sensor Based on Sandwich-Structure Composite Diaphragm

High-Sensitivity EFPI-Based Acoustic Sensor Using in-Fiber Collimator and Adjustable 45° Mirror

Fiber optic acoustic sensor based on Fiber Bragg grating Fabry-Perot(FBG-FP)cavity

Diaphragm-type Fiber-Optic Interferometric Acoustic Sensor

Broadband Fiber-Optic Acoustic Sensors

Flexible Optical Fiber Fabry–Perot Interferometer Based Acoustic and Mechanical Vibration Sensor

Fiber Acoustic Sensor with Stable Operating-Point Based on a Photo-Thermal Cavity

Ultra-High-Sensitivity, Miniaturized Fabry-Perot Interferometric Fiber-Optic Microphone for Weak Acoustic Signals Detection

Fiber-Optic Sensor for Acoustic Localization

A Phase-Sensitive Optical Time Domain Reflectometry with Non-Uniform Frequency Multiplexed NLFM Pulse

Diaphragm Based Long Cavity Fabry–Perot Fiber Acoustic Sensor Using Phase Generated Carrier

An Optical Fiber Hydrophone Using Equivalent Phase Shift Fiber Bragg Grating for Underwater Acoustic Measurement

Sensitivity Characteristics of Microfiber Fabry-Perot Interferometric Photoacoustic Sensors

Vibration Measurement of Smart Composite Structures by Using the New Intensity Modulated Optical Fiber Sensor

Tunable high-finesse fiber optic Fabry-Perot interferometer for photoacoustic tomography (Conference Presentation)