[Evolution of Extracellular Polymeric Substances of the Activated Sludge with Calcium Ion Addition During Set-up Period of Sequencing Batch Reactors]

Li-Fei Ren,Xin-Ping Yang,Wen-Wen Zhang

DOI: https://doi.org/10.13227/j.hjkx.201612090

2017-06-08

Abstract:Great attention has been paid to accelerate the start-up period and enhance floc properties and structural stability in activated sludge reactors with the aid of inorganic chemical agents such as calcium ion. The laboratory-scale sequencing batch reactors (SBRs) were operated continuously for 35 days to investigate the effect of calcium ion (Ca2+) on the physicochemical properties and evolution of extracellular polymeric substances (EPS) of activated sludge during set-up period. When compared to the control (non-calcium ion addition), the addition of 150 mg·L-1Ca2+ to the influent significantly increased the mixed liquid suspended solids (MLSS) and the mixed liquid volatile suspended solids (MLVSS) by 89.6% and 75.6% on 28 d, respectively, and decreased the sludge volume index (SVI) by 47.9% following SBRs set-up. Compared with the control system, the contents of EPS, polysaccharides (PS) and proteins (PN) were increased by 76.4%, 28.8% and 31.6% under the condition of Ca2+ dosage of 150 mg·L-1. The PS/PN ratio was 68.8 for Ca2+ addition, compared to only 36.6 for the control reactor. Analysis using three-dimensional excitation emission matrix fluorescence spectroscopy and Fourier transform infrared spectrum revealed that Ca2+ addition changed the compositional characteristics of EPS. Results from this study provided a fundamental knowledge basis for the improvement of the settling properties of activated sludge with calcium ion addition.