Abstract:The rolling resistance between a pair of contacting particles can be modeled with two mechanisms. The first mechanism, already widely addressed in the DEM literature, involves a contact moment between the particles. The second mechanism involves a reduction of the tangential contact force, but without a contact moment. This type of rotational resistance, termed creep-friction, is the subject of the paper. Within the creep-friction literature, the term "creep" does not mean a viscous mechanism, but rather connotes a slight slip that accompanies rolling. Two extremes of particle motions bound the range of creep-friction behaviors: a pure tangential translation is modeled as a Cattaneo-Mindlin interaction, whereas prolonged steady-state rolling corresponds to the traditional wheel-rail problem described by Carter, Poritsky, and others. DEM simulations, however, are dominated by the transient creep-friction rolling conditions that lie between these two extremes. A simplified model is proposed for the three-dimensional transient creep-friction rolling of two spheres. The model is an extension of the work of Dahlberg and Alfredsson, who studied the two-dimensional interactions of disks. The proposed model is applied to two different systems: a pair of spheres and a large dense assembly of spheres. Although creep-friction can reduce the tangential contact force that would otherwise be predicted with Cattaneo-Mindlin theory, a significant force reduction occurs only when the rate of rolling is much greater than the rate of translational sliding and only after a sustained period of rolling. When applied to the deviatoric loading of an assembly of spheres, the proposed creep-friction model has minimal effect on macroscopic strength or stiffness. At the micro-scale of individual contacts, creep-friction does have a modest influence on the incremental contact behavior.

A Minimum Principle for the Law of Dry Friction, With Application to Elastic Cylinders in Rolling Contact—Part 1: Fundamentals—Application to Steady Rolling

Some New Results in Rolling Contact

Study of the Falling Friction Effect on Rolling Contact Parameters

Transient Phenomena in Two Elastic Cylinders Rolling Over Each Other With Dry Friction

Friction in Rolling a Cylinder on or Under a Viscoelastic Substrate with Adhesion

Transient Rolling Contact Phenomena

Finite element modelling of frictional thermomechanical rolling/sliding contact using an arbitrary Lagrangian–Eulerian formulation

An Approximation of Solutions for the Problem with Quasistatic Contact in the Case of Dry Friction

Towards a statistical theory of solid dry friction

Kalker's algorithm Fastsim solves tangential contact problems with slip-dependent friction and friction anisotropy

Fracture Mechanics implications for apparent static friction coefficient in contact problems involving slip-weakening laws

Analysis of the effects of rigid and elastic boundary conditions in the elastic-plastic finite element analysis of rolling contact

Transient rolling friction model for discrete element simulations of sphere assemblies

Nonsmooth analysis of three-dimensional slipping and rolling in the presence of dry friction

Elastic solids under frictionless rigid contact and configurational force

Explicit and asymptotic solutions for frictional incomplete half-plane contacts subject to general oscillatory loading in the steady-state

Lubrication Of Nonconformal Contacts

Frictional contact analysis in a spherical roller bearing

Model for the resistance force acting on circular bodies in the imminence of rolling