[Treatment guidelines in gynecologic malignancies].

K. Hasegawa,Ryoko Ichikawa,K. Kawamura,Y. Udagawa

2012-06-01

Abstract:

What problem does this paper attempt to address?

High-Spatial-Resolution Quantitative Chemomechanical Mapping of Organic Composite Cathodes for Sulfide-Based Solid-State Batteries

Qing Ai,Zhaoyang Chen,Boyu Zhang,Fan Wang,Tianshu Zhai,Yifeng Liu,Yifan Zhu,Tanguy Terlier,Qiyi Fang,Yanliang Liang,Lihong Zhao,Chaoshan Wu,Hua Guo,Zheng Fan,Ming Tang,Yan Yao,Jun Lou

DOI: https://doi.org/10.1021/acsenergylett.2c02430

IF: 22

2023-01-24

ACS Energy Letters

Abstract:Understanding the chemomechanical behaviors of electrodes, particularly at electrode/electrolyte interfaces, is critical for improving the performance of all-solid-state batteries. However, due to the instability of electrolyte materials under ambient conditions, such characterizations are challenging, particularly for sulfide-based all-solid-state batteries. Herein, by combining time-of-flight secondary-ion mass spectroscopy (ToF-SIMS) and in-SEM nanoindentation measurements, a systematic quantitative investigation of the chemomechanical behaviors of pyrene-4,5,9,10-tetraone (PTO)/Li6PS5Cl composite cathodes is carried out. Chemical and quantitative mechanical information on the composite cathode was collected with high spatial resolution after developing and implementing an air-free characterization protocol. By directly connecting the Young’s modulus and hardness with the Li distribution in the composite cathode, a comprehensive chemomechanical mapping of the PTO/Li6PS5Cl composite cathode has been established. This work improves our knowledge of the critical chemomechanical phenomena that occur at the cathode/electrolyte interfaces in all-solid-state batteries.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
In Situ Probing Multiple-Scale Structures of Energy Materials for Li-Ion Batteries

He Zhu,Yalan Huang,Hekang Zhu,Liguang Wang,Si Lan,Xinhui Xia,Qi Liu

DOI: https://doi.org/10.1002/smtd.201900223

IF: 12.4

2020-01-01

Small Methods

Abstract:Knowledge of atomic interactions with high-energy photons or particles has opened a window to the microscopic structures of materials. In particular, X-rays and neutrons interact with electrons and nuclei of atoms in different ways, which enables their complementary scattering, spectroscopic, and imaging capabilities for structural characterizations. In the past decades, techniques based on X-ray and neutron interactions, capable of being time-resolved and combined, have been well developed for encoding structures in various length, elemental and temporal levels, and, in turn, have ignited breakthroughs in the field of battery science and engineering. Herein are reviewed the advanced in situ X-ray and neutron techniques for studying lithium-ion batteries, which offer dynamic observations of chemical, electronic, and geometric changes during realistic battery operations. For each of the techniques, with a brief description of the theory on account of characterizing principles is given (i.e., scattering, excitation, and emission), followed by an introduction of operando methodologies including instruments, setups, and cell designs employed in synchrotron and neutron beamlines. Finally, a few practical examples are presented to demonstrate the applicability of these techniques in studying Li-ion batteries, with a particular emphasis on each of their structural sensitivities at various time, elemental, and length levels.
Probing Battery Electrochemistry with in Operando Synchrotron X‐Ray Imaging Techniques

Liguang Wang,Jiajun Wang,Pengjian Zuo

DOI: https://doi.org/10.1002/smtd.201700293

IF: 12.4

2018-01-01

Small Methods

Abstract:In operando tracking of the complex phase transformation pathway in battery materials and correlating morphology change, chemical composition, and phase structure with electrochemical performance is critical in exploring advanced battery systems with high energy density and safety. Emerging synchrotron X‐ray imaging techniques with high spatial, temporal, and chemical resolution provides unique tools to elucidate the underlying mechanisms in battery electrochemical reactions. Here, the recent significant progress in a number of rapidly growing synchrotron X‐ray imaging techniques that have been applied in battery research under in operando conditions is summarized. The basic principle and in operando experimental setup of these X‐ray imaging methods are briefly introduced. The unique capabilities of each X‐ray technique and the critical achieved scientific insights in a variety of battery materials are discussed, with particular emphasis on how these in operando X‐ray imaging techniques can advance fundamental understanding of the complex battery electrochemistry. Perspectives on the challenges and future trends in technology development for in operando X‐ray imaging study are also briefly proposed.
Electrochemical Processes and Reactions in Rechargeable Battery Materials Revealed Via in Situ Transmission Electron Microscopy

Zhefei Sun,Jianhai Pan,Weiwei Chen,Haoyu Chen,Shenghui Zhou,Xiaoyu Wu,Yangsu Wang,Kangwoon Kim,Jie Li,Haodong Liu,Yifei Yuan,Jiangwei Wang,Dong Su,Dong-Liang Peng,Qiaobao Zhang

DOI: https://doi.org/10.1002/aenm.202303165

IF: 27.8

2024-01-01

Advanced Energy Materials

Abstract:Rechargeable batteries that make renewable energy resources feasible for electrification technologies have been extensively investigated. Their corresponding performance is strongly dependent on the structural characteristics and chemical dynamics of internal electrode and electrolyte materials under operating conditions. To enhance battery performance and lifetime, a comprehensive understanding of the structure‐dynamics‐performance correlation of such materials under different working conditions is of great significance. Fortunately, in situ transmission electron microscopy (TEM) encompassing high‐resolution imaging, diffraction, and spectroscopic analysis, offers unprecedented insights into the nano/atomic scale structural changes and degradation pathways of rechargeable battery materials under operational conditions. Such insights are pivotal for a deep‐rooted understanding of reaction mechanisms and the structure‐activity interplay within battery materials. This work, therefore, highlights the advances in in situ TEM's utility in unveiling dynamic chemical and physical changes in real‐time within battery materials of rechargeable batteries. Electrochemical processes and degradation mechanisms are systematically explored and summarized. Moreover, the technical progress, challenges, and valuable insights provided by in situ TEM techniques for addressing critical issues in battery materials are underscored. The work concludes with a discussion of emerging research directions that hold the potential to revolutionize the renewable energy field in the near future.
Recent advance into understanding electro-chemo-mechanical behavior of lithium ion batteries by electron microscopy

Yonghe Li,Xiaopeng Cheng,Kejie Zhao,Yuefei Zhang

DOI: https://doi.org/10.1016/j.mtnano.2019.100040

IF: 10.3

2019-01-01

Materials Today Nano

Abstract:The amount and kinetics of intercalation and extraction of electrons and ions in electrodes is critical for high-performance Li-ion batteries (LIBs), which are rather complicated involving tight interactions of both electrochemistry and mechanics. These coupled electro-chemo-mechanical behaviors could substantially influence the number and kinetics of transferred ions and electrons and ultimately affect the performance of the entire battery system. Furthermore, the emerged surface/interface coating–engineered electrodes in both cathode and anode materials can significantly regulate the performance of batteries, while the underlying mechanism should urgently be unveiled. With the capability of resolving the structure and chemistry, advanced electron microscopy is an ideal technique for directly visualizing the interplay between electrochemistry and mechanics in both neat and modified electrode materials at atomic-to-bulk scale. This review first summaries recent progress in electron microscopy regarding electro-chemo-mechanical behaviors of both anode and cathode materials, which includes techniques of in situ/ex situ (scanning) transmission electron microscopy and scanning electron microscopy. In addition, as a comparison, the electron microscopy of how surface/interface coatings regulated electrodes is further represented. Finally, the major challenges and opportunities of electron microcopy techniques are outlined for rechargeable ion batteries. An in-depth understanding of the electrochemistry-mechanics interaction in electrodes could describe the full mechanism that governs the Li-storage performance and then provide fundamental guidelines for target-oriented LIB design and optimization.
2D/3D Imaging Phase Transformation During Battery Operation with Synchrotron Hard X-Ray Microscopy

Jiajun Wang,Jun Wang

DOI: https://doi.org/10.1149/ma2016-03/2/948

2016-01-01

ECS Meeting Abstracts

Abstract:2D/3D imaging phase transformation during battery operation with synchrotron hard X-ray microscopy Jiajun Wang, Jun Wang* National Synchrotron Light Source II, Brookhaven National Laboratory, Building 743 Ring Road, Upton, NY (USA) Electrochemically driven phase transformation directly influences electrode performance in lithium ion batteries. Advancing our understanding of the mechanism necessitates the development of advanced tools with in situ capability to track the dynamic phase and structural changes of battery materials at 2D and 3D. The synchrotron hard X-ray imaging technique is particularly interesting for applications in battery studies because of its natural characteristics: it is non-destructive, chemically and elementally sensitive, environmentally friendly, and highly penetrative to enable in situ study of a real battery. Considerable progress in this field has been reported recently from our group, beamline X8C at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL), where a new hard X-ray imaging technique, transmission X-ray microscopy (TXM), has been developed and applied to battery microstructure study. TXM is a full-field high resolution x-ray imaging technique with a Fresnel zone plate serving as an objective lens. The newly developed TXM at BNL has offered new opportunities to directly image the interior microstructures of a variety of battery materials in 2D and 3D at nanometer scale.[1-5] A particularly important capability of this new beamline is that it can provide chemical phase mapping information at nano-scale spatial resolution (sub-30 nm for 2D and sub-50 nm for 3D), combining with X-ray absorption near edge structure (XANES) spectroscopy. The absorption mode (5-11 keV) covers most of transition-metal elements (e.g. Zn, Cu, Fe, Co, Ni, Mn, etc), which is particularly interesting for batteries, catalysts and other energy materials studies. The large field of view (40x40 µm) allows observing many particles in the sample at the same time, which will provide more accurate statistic information. In this talk, we will present our recent work using in situ/in operando TXM approach to track phase transformation at 2D and 3D for anode (Tin) and cathode (LiFePO4) battery materials. Challenges and opportunities of TXM technology for energy materials research will be also discussed. This in situ imaging approach has a wide variety of applications in other fields, such as fuel cells, catalysis, environmental science and biological science. Reference [1] Wang, J., Eng, C., Chen-Wiegart, Y. K., Wang, J. Probing three-dimensional sodiation–desodiation equilibrium in sodium-ion batteries by in situ hard X-ray nanotomography. Nat. Commun. 6, 7496 (2015). [2] Wang, J., Chen-Wiegart, Y. K., Wang, J. In operando tracking phase transformation evolution of lithium iron phosphate with hard X-ray microscopy. Nat. Commun. 5, 4570 (2014). [3] Wang, J., Chen-Wiegart, Y. K., Wang, J. In situ three-dimensional synchrotron X-ray nanotomography of the (de)lithiation processes in tin anodes. Angew. Chem. Int. Ed. 126, 4549-4553 (2014). [4] Wang, J. et al. Size-dependent surface phase change of lithium iron phosphate during carbon coating. Nat. Commun. 5, 3145 (2014). [5] Wang, J., Chen-Wiegart, Y. K., Wang, J. In situ chemical mapping of a lithium-ion battery using full-field hard X-ray spectroscopic imaging. Chem. Commun. 49, 6480-6482 (2013). [6] Wang, J. et al. Automated markerless full field hard x-ray microscopic tomography at sub-50 nm 3-dimension spatial resolution. Appl. Phys. Lett. 100, 143107 (2012). Figure 1
Revealing the Design Principles of Ni-Rich Cathodes for All-Solid-State Batteries

Wei Jiang,Xinxin Zhu,Renzhi Huang,Shu Zhao,Xinming Fan,Min Ling,Chengdu Liang,Liguang Wang

DOI: https://doi.org/10.1002/aenm.202103473

IF: 27.8

2022-01-01

Advanced Energy Materials

Abstract:Electrode microstructure is one of the primary factors determining the electrochemical properties of all-solid-state batteries (ASSBs). However, the key principles of electrode design to realize fast ionic/electronic transport pathways are not well elucidated. Herein, the correlation between electrode microstructure and electrochemical behaviors is studied through different electrode design in terms of energy-density-related electrode composition and Ni-rich layered oxides particle size distribution. A positive relation between particle size and mass fraction in electrode design is revealed, that is, as the particle size increases, more cathode materials are required to enable the fast reaction kinetics. The well interconnected active particles and solid electrolytes construct the highly percolated ionic/electronic transfer networks, which determines the overall electrochemical properties. The findings in this work give a new insight into electrode design to promote the development of high-energy and high-power ASSBs.
Application of Operando X-ray Diffraction and Raman Spectroscopies in Elucidating the Behavior of Cathode in Lithium-Ion Batteries

Wen Zhu,Dongqiang Liu,Andrea Paolella,Catherine Gagnon,Vincent Gariépy,Ashok Vijh,Karim Zaghib

DOI: https://doi.org/10.3389/fenrg.2018.00066

IF: 3.4

2018-07-31

Frontiers in Energy Research

Abstract:With the advances in characterization techniques, various operando/in-situ methods were applied in studying rechargeable batteries in order to improve the electrochemical properties of electrode materials, prolonging the battery life and developing new battery materials. In the present review, we focus on the characterization of electrode materials with operando/in-situ X-ray diffraction and Raman spectroscopies. By correlating the results obtained via these two techniques in different electrode chemistry: (a) intercalation materials, such as layered metal oxides and (b) conversion materials, such as elemental sulfur. We demonstrate the importance of using operando/in-situ techniques in examining the microstructural changes of the electrodes under various operating conditions, in both macro and micro-scales. These techniques also reveal the working and the degradation mechanisms of the electrodes and the possible side reactions involved. The comprehension of these mechanisms is fundamental for ameliorating the electrode materials, enhancing the battery performance and lengthening its cycling life.

energy & fuels
Progress of Key Electronic States in Lithium Ion Battery Materials Probed Through Soft X-ray Spectroscopy

Zhuo Zengqing,Pan Feng

DOI: https://doi.org/10.7503/cjcu20210232

2021-01-01

Abstract:The formidable challenges for developing high energy/power density, low cost, and safe lithium ion battery have necessitated employing advanced tools to understand the intrinsic physical and chemical properties of battery materials. Electronic structure of batteries materials determines the electrochemical performance, e.g., the potential and sequence of cationic and anionic redox, the voltage and capacity decay mechanism upon electrochemical cycling. It is crucial to detect and control the electronic state evolution of battery materials through advanced experimental characterizations. Synchrotron based soft X-ray spectroscopy stands out as one of the most effective way directly measuring both the occupied and unoccupied states in the vicinity of Fermi level, which is relevant to battery comprehensive performance. As core level spectroscopies, soft X-ray spectroscopy provides direct probe of the relevant transition-metal (TM) 3d states and anion p states in battery materials with elemental, chemical, and orbital sensitivity through excitation from core state to shallow unoccupied state. Quantitative analysis of TM L-edge and anion K-edge soft X-ray spectroscopy provides detailed information about local structural effects, valence, and spin states of battery materials. In this work, we review the soft X-ray spectroscopy of the evolution of electronic state in battery materials. We start with an overview of the main experimental aspects of soft X-ray spectroscopy. We subsequently discuss both cationic and anionic redox in battery materials through soft X-ray spectroscopy, which is meaningful in practice for enhancing the performance of a battery. The recently developed mapping of resonant inelastic X-ray scattering (mRIXS) is a powerful probe of battery chemistry with superior sensitivity. The mRIXS is demonstrated as a reliable technique for fingerprinting oxygen redox, and the tool-of-choice to study the fundamental nature of bulk oxygen states.
(Digital Presentation) Chemical Workflow of Characterizing Lithium-Ion Battery Electrodes: From SEM-Eds PCA and FIB Tof-SIMS Analysis to XPS

Chengge Jiao,Fang Zhang,Ruijie Shao,Chris Stephens,Tim Nunney

DOI: https://doi.org/10.1149/ma2023-0283379mtgabs

2023-12-22

ECS Meeting Abstracts

Abstract:Lithium-ion batteries (LIBs) have revolutionized energy storage technology, with cathode materials playing a pivotal role in their performance. Nickel Manganese Cobalt (NMC) cathodes are essential components, where the nickel (Ni) content profoundly influences battery capacity and cycle time. Traditional methods, such as SEM-EDS element mapping, have limitations in resolving distinct NMC phases. To address this, we employ Principal Component Analysis (PCA) phase mapping, unveiling intricate NMC phase distinctions. Furthermore, we investigate into the crucial aspect of lithium-ion distribution within the cathode using Focused Ion Beam Time-of-Flight Secondary Ion Mass Spectrometry (FIB ToF-SIMS). This technique, when integrated a compact SIMS detector with a DualBeam microscope, provides invaluable insights into lithiation and delithiation processes regarding to battery cycling. Our finding on an electrode revealing that discharged cathodes exhibit 7Li+ signal 3.5 times higher than charged cathodes. The SIMS lithium mapping results illustrated the trapped lithium ions in charged cathodes, as well as the uniform return of lithium ions to cathode oxide material upon discharge. Additionally, our results highlight the preservation of oxygen levels in cathode chemistry during charging and discharging, except for its involvement in lithium intercalation. We also address the challenges associated with windowless EDS detectors for lithium detection based on published literatures. Expanding our investigations, we present novel results of FIB-SIMS at cryogenic conditions, unveiling the distribution of lithium and sodium in an anode electrode. Moreover, we illuminate disparities in lithium detection between room temperature and cryogenic temperature acquisitions, providing insights into the behaviour of slow-charged graphite anodes. In this abstract, we extend our presentation to include X-ray Photoelectron Spectroscopy (XPS) for the detection of organic and inorganic matter in battery electrodes. In summary, our work combines SEM-EDS PCA and FIB ToF-SIMS and XPS techniques to provide a comprehensive understanding of lithium-ion battery cathode, anode materials, contributing to advancements in energy storage technology. Keywords : Lithium-ion battery, EDS PCA phase mapping, FIB-ToF-SIMS, XPS, SEM-FIB Reference [1] Ali Eftekhari, Energy Storage Materials, Volume 7, April 2017, Pages 157-180. [2] Chengge Jiao, Lex Pillatsch, Johannes Mulders, David Wall, August 2019, Microscopy and Microanalysis 25(S2):876-877. [3] Mingwei Shang, Xi Chen, Junjie Niu, Cell Reports Physical Science 3, 100767, February 16, 2022 Figure 1
Nanomechanics of Li-ion battery materials

Hugues-Yanis Amanieu

2015-12-14

Abstract:Active materials used in lithium ion batteries consist of micro-metric ceramic particles. Mechanical failure can happen within these brittle particles due to large internal stresses provoked by lithium intercalating in the crystalline structure during charge and discharge. Their mechanical behavior is directly related to some key intrinsic parameters, namely the elastic modulus, the fracture toughness and lithium di usivity. This works deals with the development of new characterization techniques to quantify these parameters at the local scale. Obtaining quantitative measurements is notably challenging for this type of specimen due to the highly heterogeneous structure of battery electrodes. For this, spinel LiMn2O4-based commercial cathodes are proposed as material of investigation. First, composition analysis of cathode materials at di erent states of charge was done. In general it was noticed that commercial cells are not as consistent as laboratory cells: impurities are often present (Ni, Co,...) and particles can be porous agglomerates of nanoparticles as well as large single grains. However only spinel structure was detected by X-ray di raction and Rietveld analysis showed a typical lattice expansion for higher lithium concentrations. A method using nanoindentation was developed. It consists of applying a large number of indents in cathode cross-sections and subsequently ltering the measurements depending on whether they t the set of hypotheses of the Oliver and Pharr method. It was observed that for decreasing lithium concentrations, the elastic modulus and the hardness increase from 87 GPa (0% State of Charge) to 104 GPa (100% SoC) and from 7.0 GPa (0% SoC) to 8.0 Gpa (100%SoC), respectively. With the help of contact-resonance atomic force microscopy, the elastic property could also be qualitatively mapped and it seems that the particles are homogeneous. Added to micro-raman spectroscopy, it was observed that neighboring particles can have di erent lithiation levels. The fracture toughness was estimated by measuring the crack opening displacement by atomic force microscopy and applying Irwin’s near eld theory. A toughness of about 0.9 MPa·m was found but should not be taken at face-value. Irwin’s theory requires a purely elastic-brittle fracture with traction-free crack walls. Unfortunately this condition cannot be met due to the size of the particles and the toughness is surely overestimated. Associated with electron backscattered di raction, cleavage planes were also evaluated on a reference {111} wafer. It was found that cracks always propagate in the <121> direction, corresponding to {101} planes just below the surface. At higher depths (> 100 nm), the crack deviates of 30 to 40◦. The last part of this work consists of developing a model to better comprehend electrochemical strain microscopy “time spectroscopy” (ESM-TS). It is the most promising technique to quantify locally ionic di usion coe cients. An AFM cantilever is used

Chemistry,Engineering,Materials Science
Operando optical tracking of single-particle ion dynamics in batteries

Alice J. Merryweather,Christoph Schnedermann,Quentin Jacquet,Clare P. Grey,Akshay Rao

DOI: https://doi.org/10.1038/s41586-021-03584-2

IF: 64.8

2021-06-23

Nature

Abstract:The key to advancing lithium-ion battery technology—in particular, fast charging—is the ability to follow and understand the dynamic processes occurring in functioning materials under realistic conditions, in real time and on the nano- to mesoscale. Imaging of lithium-ion dynamics during battery operation (operando imaging) at present requires sophisticated synchrotron X-ray<a href="#ref-CR1">1</a>,<a href="#ref-CR2">2</a>,<a href="#ref-CR3">3</a>,<a href="#ref-CR4">4</a>,<a href="#ref-CR5">5</a>,<a href="#ref-CR6">6</a>,<a href="/articles/s41586-021-03584-2#ref-CR7">7</a> or electron microscopy<a href="/articles/s41586-021-03584-2#ref-CR8">8</a>,<a href="/articles/s41586-021-03584-2#ref-CR9">9</a> techniques, which do not lend themselves to high-throughput material screening. This limits rapid and rational materials improvements. Here we introduce a simple laboratory-based, optical interferometric scattering microscope<a href="#ref-CR10">10</a>,<a href="#ref-CR11">11</a>,<a href="#ref-CR12">12</a>,<a href="/articles/s41586-021-03584-2#ref-CR13">13</a> to resolve nanoscopic lithium-ion dynamics in battery materials, and apply it to follow cycling of individual particles of the archetypal cathode material<a href="/articles/s41586-021-03584-2#ref-CR14">14</a>,<a href="/articles/s41586-021-03584-2#ref-CR15">15</a>, LixCoO2, within an electrode matrix. We visualize the insulator-to-metal, solid solution and lithium ordering phase transitions directly and determine rates of lithium diffusion at the single-particle level, identifying different mechanisms on charge and discharge. Finally, we capture the dynamic formation of domain boundaries between different crystal orientations associated with the monoclinic lattice distortion at the Li0.5CoO2 composition<a href="/articles/s41586-021-03584-2#ref-CR16">16</a>. The high-throughput nature of our methodology allows many particles to be sampled across the entire electrode and in future will enable exploration of the role of dislocations, morphologies and cycling rate on battery degradation. The generality of our imaging concept means that it can be applied to study any battery electrode, and more broadly, systems where the transport of ions is associated with electronic or structural changes. Such systems include nanoionic films, ionic conducting polymers, photocatalytic materials and memristors.

multidisciplinary sciences
Dynamic investigation of battery materials via advanced visualization: from particle, electrode to cell level

Cheng Zeng,Jianing Liang,Can Cui,Tianyou Zhai,Huiqiao Li

DOI: https://doi.org/10.1002/adma.202200777

IF: 29.4

2022-04-01

Advanced Materials

Abstract:Li‐ion batteries, the most‐popular secondary battery, are typically electrochemical systems controlled by ion insertion dynamics. The battery dynamics involves mass transport, charge transfer, ion‐electron coupled reaction, electrolyte penetration, ion solvation, and interfacial evolution. However, the traditional electrochemical methods are hard to capture the accurate and individual details of different dynamic processes in the "black box" batteries, instead, only the net result of multi‐factors on whole scale. Recently, different types of advanced visualization techniques are developed, which provide us powerful tools to track and monitor the internal on‐site real‐time dynamic processes inside the "black box" batteries, giving intuitionistic details and fine information at various scales from crystal lattice, single particle, electrode to cell level. Here, we review the recent progress on the investigation of electrochemical dynamics in battery materials via developed techniques across wide timescales and space‐scales, including the dynamic process inside the active particle, kinetics issues at the electrode/electrolyte interface, dynamic inhomogeneity in electrode, and dynamic transportation in cell level. Finally, we summarize the fundamental principles to improve the battery dynamics and highlight new technologies for future more stringent conditions. In prospect, this review opens sight on battery interior for a clearer, deeper and more thorough understanding of dynamics.This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Single particles electrochemistry for batteries

Wei Xu,Ye Tian,Guoqiang Zou,Hongshuai Hou,Xiaobo Ji

DOI: https://doi.org/10.1016/j.jelechem.2020.113935

IF: 4.598

2020-09-01

Journal of Electroanalytical Chemistry

Abstract:Ion migration is the most fundamental process in the field of energy storage and conversion. During the charge-discharge cycle, the (de)intercalation of guest ions in solid host particles as electrode materials change the distribution of element, phase and stress in the particle and give rise to crushing and degradation, which will influence the electrochemical behavior of the particles. New methods are constantly being proposed to probe the electrochemical reactions on individual particle for understanding the mechanism of the process. In this short review, we highlight some pioneer works from two different perspectives, namely direct electrochemical detection methods, such as nano-impact method, nanoprobe detection and flowing particle analysis, and indirect optical analysis methods utilizing X-ray imaging, infrared near-field nanoscopy, Raman microscopy and surface plasmon resonance microscopy.

chemistry, analytical,electrochemistry
Nanoscale Imaging of Lithium Ion Distribution During In Situ Operation of Battery Electrode and Electrolyte

Megan E. Holtz,Yingchao Yu,Deniz Gunceler,Jie Gao,Ravishankar Sundararaman,Kathleen A. Schwarz,Tomás A. Arias,Héctor D. Abruña,David A. Muller,Tomás A. Arias,Héctor D. Abruña

DOI: https://doi.org/10.1021/nl404577c

IF: 10.8

2014-02-21

Nano Letters

Abstract:A major challenge in the development of new battery materials is understanding their fundamental mechanisms of operation and degradation. Their microscopically inhomogeneous nature calls for characterization tools that provide operando and localized information from individual grains and particles. Here, we describe an approach that enables imaging the nanoscale distribution of ions during electrochemical charging of a battery in a transmission electron microscope liquid flow cell. We use valence energy-loss spectroscopy to track both solvated and intercalated ions, with electronic structure fingerprints of the solvated ions identified using an ab initio nonlinear response theory. Equipped with the new electrochemical cell holder, nanoscale spectroscopy and theory, we have been able to determine the lithiation state of a LiFePO4 electrode and surrounding aqueous electrolyte in real time with nanoscale resolution during electrochemical charge and discharge. We follow lithium transfer between electrode and electrolyte and image charging dynamics in the cathode. We observe competing delithiation mechanisms such as core-shell and anisotropic growth occurring in parallel for different particles under the same conditions. This technique represents a general approach for the operando nanoscale imaging of electrochemically active ions in the electrode and electrolyte in a wide range of electrical energy storage systems.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Digital modeling-assisted mesoscale visualization lights up materials science from liquid- to solid-state batteries

Zhuomin Qiang,Xudong Li,Yanbin Ning,Chaoqun Zhang,Yinyong Sun,Geping Yin,Jiajun Wang,Shuaifeng Lou

DOI: https://doi.org/10.1016/j.ensm.2023.102960

IF: 20.4

2023-09-15

Energy Storage Materials

Abstract:A typical battery electrode is composed of polydisperse particles and porous composite binder domains. The arrangement of these constituent phases into complex mesoscopic structures plays a significant impact on electrochemical reaction and mechanical response, ultimately limiting macroscale battery performance. Limited by the spatial and temporal resolution of current characterization techniques, bridging digital modeling-assisted electrochemical simulation techniques can fully reveal the complicated mesoscale mechanisms in electrodes. The exploitation of digital twin-driven electrode models, visualization of physical and electrochemical behavior has become a prospect with the development of computing technology. This review summarizes the previous and current research focused on the digital model-derived to investigate the performance and the design of electrodes at mesoscale. The typical cases of electrochemical visualization in liquid and solid-state battery electrodes driven by digital modeling are discussed, including statistical characteristics of particles, heterogeneous reactions, and structure design of electrodes, which provide valuable insights into the complicated reaction mechanisms of batteries.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Atomic‐Scale Structure Evolution in a Quasi‐Equilibrated Electrochemical Process of Electrode Materials for Rechargeable Batteries

Lin Gu,Dongdong Xiao,Yong-Sheng Hu,Hong Li,Yuichi Ikuhara

DOI: https://doi.org/10.1002/adma.201404620

IF: 29.4

2015-01-01

Advanced Materials

Abstract:Lithium-ion batteries have proven to be extremely attractive candidates for applications in portable electronics, electric vehicles, and smart grid in terms of energy density, power density, and service life. Further performance optimization to satisfy ever-increasing demands on energy storage of such applications is highly desired. In most of cases, the kinetics and stability of electrode materials are strongly correlated to the transport and storage behaviors of lithium ions in the lattice of the host. Therefore, information about structural evolution of electrode materials at an atomic scale is always helpful to explain the electrochemical performances of batteries at a macroscale. The annular-bright-field (ABF) imaging in aberration-corrected scanning transmission electron microscopy (STEM) allows simultaneous imaging of light and heavy elements, providing an unprecedented opportunity to probe the nearly equilibrated local structure of electrode materials after electrochemical cycling at atomic resolution. Recent progress toward unraveling the atomic-scale structure of selected electrode materials with different charge and/or discharge state to extend the current understanding of electrochemical reaction mechanism with the ABF and high angle annular dark field STEM imaging is presented here. Future research on the relationship between atomic-level structure evolution and microscopic reaction mechanisms of electrode materials for rechargeable batteries is envisaged.
Mutual modulation between surface chemistry and bulk microstructure within secondary particles of nickel-rich layered oxides

Shaofeng Li,Zhisen Jiang,Jiaxiu Han,Zhengrui Xu,Chenxu Wang,Hai Huang,Chang Yu,Sang-Jun Lee,Piero Pianetta,Hendrik Ohldag,Jieshan Qiu,Jun-Sik Lee,Feng Lin,Kejie Zhao,Yijin Liu

DOI: https://doi.org/10.1038/s41467-020-18278-y

IF: 16.6

2020-09-07

Nature Communications

Abstract:Abstract Surface lattice reconstruction is commonly observed in nickel-rich layered oxide battery cathode materials, causing unsatisfactory high-voltage cycling performance. However, the interplay of the surface chemistry and the bulk microstructure remains largely unexplored due to the intrinsic structural complexity and the lack of integrated diagnostic tools for a thorough investigation at complementary length scales. Herein, by combining nano-resolution X-ray probes in both soft and hard X-ray regimes, we demonstrate correlative surface chemical mapping and bulk microstructure imaging over a single charged LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) secondary particle. We reveal that the sub-particle regions with more micro cracks are associated with more severe surface degradation. A mechanism of mutual modulation between the surface chemistry and the bulk microstructure is formulated based on our experimental observations and finite element modeling. Such a surface-to-bulk reaction coupling effect is fundamentally important for the design of the next generation battery cathode materials.

multidisciplinary sciences
Using in situ and operando methods to characterize phase changes in charged lithium nickel cobalt aluminum oxide cathode materials

Sooyeon Hwang,Eric A Stach

DOI: https://doi.org/10.1088/1361-6463/ab60ea

2020-01-06

Abstract:Lithium ion batteries have been extensively explored in recent decades in order to improve their electrochemical performance, address safety concerns, and reduce costs in larger-scale applications. Electrode materials are key components which govern the properties of the battery at the system level. Cathode materials are of particular importance as they are a limiting factor for achieving high energy density. Lithium nickel cobalt aluminum oxide (LiNi0.8Co0.15Al0.05O2, referred to subsequently as NCA) is one of successful cathode materials since it can deliver higher capacity than other cathode materials such as lithium cobalt oxide or lithium iron phosphate. However, structural instabilities that occur NCA during charging or at high temperatures are believed to be the primary reason for performance degradation as well as a possible safety threat. Thus, understanding the structural evolution that occurs in NCA is of importance to acquire fundamental insights for taking full advantage of the high capacity of NCA materials. Beyond static information, in situ and operando characterization approaches allow us to observe structural changes under external stimulus or in a working condition, providing a deeper understanding of the routes by which structure evolve. In this review, we will describe the use of both in situ and operando characterization performed with both synchrotron x-ray based techniques and advanced electron microscopy, as the combination of these techniques have been shown to be particularly effective at providing structural information at complementary length scales.
Spatially Resolved Operando Synchrotron-Based X-Ray Diffraction Measurements of Ni-Rich Cathodes for Li-Ion Batteries

Andrew Stephen Leach,Alice V. Llewellyn,Chao Xu,Chun Tan,Thomas M. M. Heenan,Alex Dimitrijevic,Karin Kleiner,Clare P. Grey,Dan J. L. Brett,Chiu C. Tang,Paul R. Shearing,Rhodri Jervis

DOI: https://doi.org/10.3389/fceng.2021.794194

2022-01-14

Frontiers in Chemical Engineering

Abstract:Understanding the performance of commercially relevant cathode materials for lithium-ion (Li-ion) batteries is vital to realize the potential of high-capacity materials for automotive applications. Of particular interest is the spatial variation of crystallographic behavior across (what can be) highly inhomogeneous electrodes. In this work, a high-resolution X-ray diffraction technique was used to obtain operando transmission measurements of Li-ion pouch cells to measure the spatial variances in the cell during electrochemical cycling. Through spatially resolved investigations of the crystallographic structures, the distribution of states of charge has been elucidated. A larger portion of the charging is accounted for by the central parts, with the edges and corners delithiating to a lesser extent for a given average electrode voltage. The cells were cycled to different upper cutoff voltages (4.2 and 4.3 V vs. graphite) and C-rates (0.5, 1, and 3C) to study the effect on the structure of the NMC811 cathode. By combining this rapid data collection method with a detailed Rietveld refinement of degraded NMC811, the spatial dependence of the degradation caused by long-term cycling (900 cycles) has also been shown. The variance shown in the pristine measurements is exaggerated in the aged cells with the edges and corners offering an even lower percentage of the charge. Measurements collected at the very edge of the cell have also highlighted the importance of electrode alignment, with a misalignment of less than 0.5 mm leading to significantly reduced electrochemical activity in that area.

[Treatment guidelines in gynecologic malignancies].

High-Spatial-Resolution Quantitative Chemomechanical Mapping of Organic Composite Cathodes for Sulfide-Based Solid-State Batteries

In Situ Probing Multiple-Scale Structures of Energy Materials for Li-Ion Batteries

Probing Battery Electrochemistry with in Operando Synchrotron X‐Ray Imaging Techniques

Electrochemical Processes and Reactions in Rechargeable Battery Materials Revealed Via in Situ Transmission Electron Microscopy

Recent advance into understanding electro-chemo-mechanical behavior of lithium ion batteries by electron microscopy

2D/3D Imaging Phase Transformation During Battery Operation with Synchrotron Hard X-Ray Microscopy

Revealing the Design Principles of Ni-Rich Cathodes for All-Solid-State Batteries

Application of Operando X-ray Diffraction and Raman Spectroscopies in Elucidating the Behavior of Cathode in Lithium-Ion Batteries

Progress of Key Electronic States in Lithium Ion Battery Materials Probed Through Soft X-ray Spectroscopy

(Digital Presentation) Chemical Workflow of Characterizing Lithium-Ion Battery Electrodes: From SEM-Eds PCA and FIB Tof-SIMS Analysis to XPS

Nanomechanics of Li-ion battery materials

Operando optical tracking of single-particle ion dynamics in batteries

Dynamic investigation of battery materials via advanced visualization: from particle, electrode to cell level

Single particles electrochemistry for batteries

Nanoscale Imaging of Lithium Ion Distribution During In Situ Operation of Battery Electrode and Electrolyte

Digital modeling-assisted mesoscale visualization lights up materials science from liquid- to solid-state batteries

Atomic‐Scale Structure Evolution in a Quasi‐Equilibrated Electrochemical Process of Electrode Materials for Rechargeable Batteries

Mutual modulation between surface chemistry and bulk microstructure within secondary particles of nickel-rich layered oxides

Using in situ and operando methods to characterize phase changes in charged lithium nickel cobalt aluminum oxide cathode materials

Spatially Resolved Operando Synchrotron-Based X-Ray Diffraction Measurements of Ni-Rich Cathodes for Li-Ion Batteries