Abstract:The increasing complexity of low-voltage networks poses a growing challenge for the reliable and fail-safe operation of electricity grids. The reasons for this include an increasingly decentralized energy generation (photovoltaic systems, wind power, etc.) and the emergence of new types of consumers (e-mobility, domestic electricity storage, etc.). At the same time, the low-voltage grid is largely unmonitored and local power failures are sometimes hard to detect. To overcome this, power line communication (PLC) has emerged as a potential solution for reliable monitoring of the low-voltage grid. In addition to establishing a communication infrastructure, PLC also offers the possibility of evaluating the cables themselves, as well as the connection quality between individual cable distributors based on their Signal-to-Noise Ratio (SNR). The roll-out of a large-scale PLC infrastructure therefore not only ensures communication, but also introduces a tool for monitoring the entire network. To evaluate the potential of this data, we installed 38 PLC modems in three different areas of a German city with a population of about 150,000 as part of the F\"uhler-im-Netz project. Over a period of 22 months, an SNR spectrum of each connection between adjacent PLC modems was generated every quarter of an hour. % and the voltage was measured every minute. The availability of this real-world PLC data opens up new possibilities to react to the increasingly complex challenges in future smart grids. This paper provides a detailed analysis of the data generation and describes how the data was collected during normal operation of the electricity grid. In addition, we present common anomalies, effects, and trends that could be observed in the PLC data at daily, weekly, or seasonal levels. Finally, we discuss potential use cases and the remote inspection of a cable section is highlighted as an example.

An open data repository for steady state analysis of a 100-node electricity distribution network with moderate connection of renewable energy sources

Automated generation of large-scale distribution grid models based on open data and open source software using an optimization approach

A set of Non-Synthetic test systems of European LV Rural, LV urban and hybrid MV/LV industrial distribution networks

Modelling the High-Voltage Grid Using Open Data for Europe and Beyond

Representation of the German transmission grid for Renewable Energy Sources impact analysis

Comprehensive Dataset on Electrical Load Profiles for Energy Community in Ireland

PyPSA-Eur: An Open Optimisation Model of the European Transmission System

Review of Steady-State Electric Power Distribution System Datasets

FiN: A Smart Grid and Power Line Communication Dataset

Dataset for generating synthetic residential low-voltage grids in Sweden, Germany and the UK

Residential load and rooftop PV generation: an Australian distribution network dataset

Voltage Estimation in Low-Voltage Distribution Grids with Distributed Energy Resources

Distributed power generation: A case study of small scale PV power plant in Greece

Renewable Energy Integration in Distribution System -- Synchrophasor Sensor based Big Data Analysis, Visualization, and System Operation

Data processing of high-rate low-voltage distribution grid recordings for smart grid monitoring and analysis

Analysis of load electricity consumption on a low-voltage distribution system with community energy storages

SimBench: Open source time series of power load, storage and generation for the simulation of electrical distribution grids

Ensembles of Realistic Power Distribution Networks

Modeling and Simulation of Distribution Networks with High Renewable Penetration in Open-Source Software: QGIS and OpenDSS

An Open Source Representation for the NYS Electric Grid to Support Power Grid and Market Transition Studies

Monitoring Energy Flows for Efficient Electricity Control in Low-Voltage Smart Grids