Distributed opto-mechanical analysis of liquids outside standard fibers coated with polyimide

Hilel Hagai Diamandi,Yosef London,Gil Bashan,Avi Zadok

DOI: https://doi.org/10.48550/arXiv.1904.12486

2019-04-29

Optics

Abstract:The analysis of surrounding media has been a long-standing challenge of optical fiber sensors. Measurements are difficult due to the confinement of light to the inner core of standard fibers. Over the last two years, new sensor concepts have enabled the analysis of liquids outside the cladding boundary, where light does not reach. Sensing is based on opto-mechanical, forward stimulated Brillouin scattering interactions between guided light and sound waves. In most previous works, however, the protective polymer coating of the fiber had to be removed first. In this work, we report the opto-mechanical analysis of liquids outside commercially available, standard single-mode fibers with polyimide coating. The polyimide layer provides mechanical protection but can also transmit acoustic waves from the fiber cladding towards outside media. Comprehensive analysis of opto-mechanical coupling in coated fibers that are immersed in liquid is provided. The model shows that forward stimulated Brillouin scattering spectra in coated fibers are more complex than those of bare fibers, and strongly depend on the exact coating diameter and the choice of acoustic mode. Nevertheless, sensing outside coated fibers is demonstrated experimentally. Integrated measurements over 100 meters of fiber clearly distinguish between air, ethanol and water outside polyimide coating. Measured spectra are in close quantitative agreement with the analytic predictions. Further, distributed opto-mechanical time-domain reflectometry mapping of water and ethanol outside coated fiber is reported, with a spatial resolution of 100 meters. The results represent a large step towards practical opto-mechanical fiber sensors.