Inositol 1,3,4,5-tetrakisphosphate as a mediator of neuronal death in ischemic hippocampus

H. Tsubokawa,K. Oguro,Hugh P. C. Robinson,T. Masuzawa,T.S.G. Rhee,Tadaomi Takenawa,Nobufumi Kawai

DOI: https://doi.org/10.1016/0306-4522(94)90597-5

IF: 3.708

1994-03-01

Neuroscience

Abstract:

What problem does this paper attempt to address?

Development and Control of A Robotic Arm for Percutaneous Surgery

Chunlin Zhou,Huifeng Wu,Xiang Xu,Yong Liu,Qi Zhu,Shuwen Pan

DOI: https://doi.org/10.1108/aa-12-2016-179

IF: 2.373

2017-01-01

Assembly Automation

Abstract:Purpose - The purpose of this paper is to propose a robotic system for percutaneous surgery. The key component in the system, a robotic arm that can manipulate a puncture needle is presented. The mechanical design, the motion control and the force control method of the robotic arm are discussed in the paper.Design/methodology/approach - The arm with an arc mechanism placed on a 3D Cartesian stage is developed as a puncture needle manipulator to locate the position of the needle tip, tune the needle's posture and actuate the puncture motion under the visual guidance of two orthogonal X-ray images of a patient by a surgeon. A focusing method by using two laser spots is proposed to automatically move the needle tip to a surgery entry point on the skin. A dynamics model is developed to control the position of the needle mechanism and an explicit force control strategy is utilized to perform the needle insertion.Findings - With the surgical system, a surgeon can easily perform puncture operation by taking two orthogonal real-time X-ray images as a visual feedback and accurately navigating the needle insertion. The laser-guided focusing method is efficient in placement of the needle tip. The explicit force control strategy is proved to be effective for holding constant and stable puncture force in experiments.Originality/value - The robotic arm has an advantage in easy redirection of the needle because the rotation and the translation are decoupled in the mechanism. By adopting simple laser pens and a well-developed kinematics model, the system can handle the entry point, locating task automatically. The focusing method and the force control method proposed in the paper are useful for the present system and could be intuitive for similar surgical robots.
Haptics-Enabled Forceps with Multi-Modal Force Sensing: Towards Task-Autonomous Surgery

Tangyou Liu,Tinghua Zhang,Jay Katupitiya,Jiaole Wang,Liao Wu

DOI: https://doi.org/10.1109/TMECH.2023.3329564

2024-01-25

Abstract:Many robotic surgical systems have been developed with micro-sized forceps for tissue manipulation. However, these systems often lack force sensing at the tool side and the manipulation forces are roughly estimated and controlled relying on the surgeon's visual perception. To address this challenge, we present a vision-based module to enable the micro-sized forceps' multi-modal force sensing. A miniature sensing module adaptive to common micro-sized forceps is proposed, consisting of a flexure, a camera, and a customised target. The deformation of the flexure is obtained by the camera estimating the pose variation of the top-mounted target. Then, the external force applied to the sensing module is calculated using the flexure's displacement and stiffness matrix. Integrating the sensing module into the forceps, in conjunction with a single-axial force sensor at the proximal end, we equip the forceps with haptic sensing capabilities. Mathematical equations are derived to estimate the multi-modal force sensing of the haptics-enabled forceps, including pushing/pulling forces (Mode-I) and grasping forces (Mode-II). A series of experiments on phantoms and ex vivo tissues are conducted to verify the feasibility of the proposed design and method. Results indicate that the haptics-enabled forceps can achieve multi-modal force estimation effectively and potentially realize autonomous robotic tissue grasping procedures with controlled forces. A video demonstrating the experiments can be found at <a class="link-external link-https" href="https://youtu.be/pi9bqSkwCFQ" rel="external noopener nofollow">this https URL</a>.

Robotics
Laser-Profiled Continuum Robot with Integrated Tension Sensing for Simultaneous Shape and Tip Force Estimation

Anzhu Gao,Ning Liu,Mali Shen,Mohamed E.M.K. Abdelaziz,Burak Temelkuran,Guang-Zhong Yang

DOI: https://doi.org/10.1089/soro.2019.0051

IF: 7.784

2020-08-01

Soft Robotics

Abstract:The development of miniaturized continuum robots has a wide range of applications in minimally invasive endoluminal interventions. To navigate inside tortuous lumens without impinging on the vessel wall and causing tissue damage or the risk of perforation, it is necessary to have simultaneous shape sensing of the continuum robot and its tip contact force sensing with the surrounding environment. Miniaturization and size constraint of the device have precluded the use of conventional sensing hardware and embodiment schemes. In this study, we propose the use of optical fibers for both actuation and tension/shape/force sensing. It uses a model-based method with structural compensation, allowing direct measurement of the cable tension near the base of the manipulator without increasing the dimensions. It further structurally filters out disturbances from the flexible shaft. In addition, a model is built by considering segment differences, cable interactions/cross talks, and external forces. The proposed model-based method can simultaneously estimate the shape of the manipulator and external force applied onto the robot tip. Detailed modeling and validation results demonstrate the accuracy and reliability of the proposed method for the miniaturized continuum robot for endoluminal intervention.

robotics
A Tension Sensor Array for Cable-Driven Surgical Robots

Zhangxi Zhou,Jianlin Yang,Mark Runciman,James Avery,Zhijun Sun,George Mylonas

DOI: https://doi.org/10.3390/s24103156

IF: 3.9

2024-05-17

Sensors

Abstract:Tendon–sheath structures are commonly utilized to drive surgical robots due to their compact size, flexibility, and straightforward controllability. However, long-distance cable tension estimation poses a significant challenge due to its frictional characteristics affected by complicated factors. This paper proposes a miniature tension sensor array for an endoscopic cable-driven parallel robot, aiming to integrate sensors into the distal end of long and flexible surgical instruments to sense cable tension and alleviate friction between the tendon and sheath. The sensor array, mounted at the distal end of the robot, boasts the advantages of a small size (16 mm outer diameter) and reduced frictional impact. A force compensation strategy was presented and verified on a platform with a single cable and subsequently implemented on the robot. The robot demonstrated good performance in a series of palpation tests, exhibiting a 0.173 N average error in force estimation and a 0.213 N root-mean-square error. In blind tests, all ten participants were able to differentiate between silicone pads with varying hardness through force feedback provided by a haptic device.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
An Integrated 3D MEMS Force Sensing and Feedback System for Robot-Assisted Minimally Invasive Surgery

Huicong Liu,Tianci Ji,Hanyang Li,Jiangjun Geng,Cheng Hou,Kaiyao Wang,Dongsheng Li,Tao Chen

DOI: https://doi.org/10.1109/jsen.2024.3380594

IF: 4.3

2024-01-01

IEEE Sensors Journal

Abstract:In this paper, a master-slave robotic system with force sensing and feedback function is developed to address the critical issue of lacking haptic information in minimally invasive surgery (MIS). A three-dimensional (3D) micro force sensor with high sensitivity and linearity is designed and integrated into the end gripper of the slave manipulator. Consequently, real-time 3D interaction force between the gripper and tissues can be directly detected. The master manipulator is equipped with a specially designed force feedback grasper. During clamping and suturing operations, the operator can perceive the feedback interaction force from the micro sensor in the end gripper, allowing for timely adjustment of clamping force. Experimental results demonstrate that the incorporation of force sensing and feedback control in the master-slave robotic system reduces the maximum clamping force from 1.2 N to 0.8 N, and the average clamping force from 0.8 N to 0.55 N, representing a significant reduction of about 20%-50%. In needle holding and knotting experiments for suturing, the operator can monitor the real-time 3D operating force within 2 N, ensuring the safety of MIS procedures.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
A Force-Feedback Methodology for Teleoperated Suturing Task in Robotic-Assisted Minimally Invasive Surgery

Armin Ehrampoosh,Bijan Shirinzadeh,Joshua Pinskier,Julian Smith,Randall Moshinsky,Yongmin Zhong

DOI: https://doi.org/10.3390/s22207829

2022-10-14

Abstract:With robotic-assisted minimally invasive surgery (RAMIS), patients and surgeons benefit from a reduced incision size and dexterous instruments. However, current robotic surgery platforms lack haptic feedback, which is an essential element of safe operation. Moreover, teleportation control challenges make complex surgical tasks like suturing more time-consuming than those that use manual tools. This paper presents a new force-sensing instrument that semi-automates the suturing task and facilitates teleoperated robotic manipulation. In order to generate the ideal needle insertion trajectory and pass the needle through its curvature, the end-effector mechanism has a rotating degree of freedom. Impedance control was used to provide sensory information about needle-tissue interaction forces to the operator using an indirect force estimation approach based on data-based models. The operator's motion commands were then regulated using a hyperplanar virtual fixture (VF) designed to maintain the desired distance between the end-effector and tissue surface while avoiding unwanted contact. To construct the geometry of the VF, an optoelectronic sensor-based approach was developed. Based on the experimental investigation of the hyperplane VF methodology, improved needle-tissue interaction force, manipulation accuracy, and task completion times were demonstrated. Finally, experimental validation of the trained force estimation models and the perceived interaction forces by the user was conducted using online data, demonstrating the potential of the developed approach in improving task performance.
A Hybrid Method Combining Data-Driven and Model-Based Algorithms for External Force-Sensing and Haptics Control of Cable-Pulley-Driven Surgical Robotic Manipulator

Zhengyu Wang,Xiang Yu,Mingxin Hai,Sen Qian,Daoming Wang,Ziqian Li

DOI: https://doi.org/10.1115/1.4064568

2024-02-27

Journal of Mechanisms and Robotics

Abstract:Abstract The implementation of the high-precision tracking control and external force-sensing ability of a manipulator is important for achieving refined surgical robot operation. In this paper, a hybrid method based on data-driven and model-based algorithms is proposed for the manipulator of a cable-pulley-driven surgical robot. This method integrates an artificial neural network and a dynamic model rotation angle estimation, and a full closed-loop control architecture is further constructed. The algorithm compensates for the hysteresis of the joint angle and effectively improves the tracking control precision. Based on the architecture, the external force estimator (EFE) using a joint torque disturbance observer and the force interaction teleoperation control strategy using a direct force feedback framework (DFF) are implemented. In the force loading experiment, it was shown that the EFE performs well for static and dynamic force estimation, and the teleoperated haptic control experiment showed that the DFF-EFE-based system has a high position-tracking accuracy with real-time external force-sensing ability.

robotics,engineering, mechanical
Multifunctional Robotic Surgical Forceps With Tactile Sensor Array for Tissue Palpation and Clamping Status Detection

Liping Ding,Feng Ju,Xiaodong Luo

DOI: https://doi.org/10.1109/JSEN.2024.3380672

IF: 4.3

2024-05-15

IEEE Sensors Journal

Abstract:Compared with traditional open surgery, robot-assisted minimally invasive surgery (RAMIS) has the significant advantages of smaller incisions, less bleeding, and faster recovery, and has been widely used in the field of surgery. However, existing robot-assisted surgical systems usually suffer from limited motion space and the lack of tactile sensing, which prevent them from correctly evaluating the interaction between surgical instruments and organs during surgery. Applying insufficient or excessive force to surgical instruments may result in failure of the surgical operation or organ damage. Therefore, in this article, a multifunctional robot-assisted surgical forceps with a tactile sensor array is designed, which can be used as a palpation probe and a clamping forceps at the same time. Tactile sensor arrays each containing 32 sensor units are integrated on the upper and lower gripping surfaces of the forceps. The sensor is based on the principle of capacitive sensing with pole pitch variation. Each sensor unit has an area of only 1 mm2, which has an accuracy of 0.1 MPa in the measurement range of 0–3 MPa. Finally, the multifunctional forceps are used to perform tumor palpation detection experiments as a probe and suture needle clamping detection experiments as the forceps to verify the feasibility of these forceps in minimally invasive surgery.

Engineering,Medicine
A Modular 3-Degree-of-Freedom Force Sensor for Robot-assisted Minimally Invasive Surgery Research

Zonghe Chua,Allison M. Okamura

DOI: https://doi.org/10.48550/arXiv.2211.05428

IF: 3.7

2022-11-10

Robotics

Abstract:Effective force modulation during tissue manipulation is important for ensuring safe robot-assisted minimally invasive surgery (RMIS). Strict requirements for in-vivo distal force sensing have led to prior sensor designs that trade off ease of manufacture and integration against force measurement accuracy along the tool axis. These limitations have made collecting high-quality 3-degree-of-freedom (3-DoF) bimanual force data in RMIS inaccessible to researchers. We present a modular and manufacturable 3-DoF force sensor that integrates easily with an existing RMIS tool. We achieve this by relaxing biocompatibility and sterilizability requirements while utilizing commercial load cells and common electromechanical fabrication techniques. The sensor has a range of +-5 N axially and +-3 N laterally with average root mean square errors(RMSEs) of below 0.15 N in all directions. During teleoperated mock tissue manipulation tasks, a pair of jaw-mounted sensors achieved average RMSEs of below 0.15 N in all directions. For grip force, it achieved an RMSE of 0.156 N. The sensor has sufficient accuracy within the range of forces found in delicate manipulation tasks, with potential use in bimanual haptic feedback and robotic force control. As an open-source design, the sensors can be adapted to suit additional robotic applications outside of RMIS.
Precise and High-Load Capacity Miniature 6-DOF Manipulator for Microsurgery

Liang Li,Heng Li,Chaoye Sui,Hui Ding,Bin Liu,Jianqing Li,Guangzhi Wang

DOI: https://doi.org/10.1109/tmech.2024.3417324

2024-01-01

IEEE/ASME Transactions on Mechatronics

Abstract:Miniaturized manipulators are invaluable for microsurgery; however, they often face limitations in precision, load capacity, and Degrees of Freedom (DOFs) due to size and weight constraints. In this article, we introduce a 6-DOF mini manipulator designed to address these challenges. Powered by cost-effective stepper linear motion modules, the proposed device incorporates a dual-plane mechanism for 4-DOF XY motion. We also innovatively integrated a compliant 2-DOF rod drive system for Z-axis rotation and translation. The manipulator's forward/inverse and remote center of motion kinematics models are provided. Furthermore, we developed a microsurgical platform equipped with microvision sensing and remote-control functions. This manipulator, which weighs less than 72 g, enables precise 6-DOF control for tools with diameters less than 0.5 mm. It delivers more than 3 N of thrust force along the compliant rod drive axis, achieving at least 10 mu m motion resolution and a 9 N maximum output force per DOF. Rigorous testing was performed, demonstrating the system's ability to successfully perform puncture and drilling operations on porcine skin and bone. Additionally, we showed its effectiveness in ocular surgeries, demonstrating its potential for use as a cost-effective, portable device in minimally invasive procedures.
A Laminated Continuum Robot With Gripping Force-Sensing Forceps for Robot-Assisted Minimally Invasive Surgeries

Feng Ju,Yan Hong,Dongming Bai,Zhanpeng Yin,Chengjun Zhu,Wenchao Yue

DOI: https://doi.org/10.1109/jsen.2022.3223044

IF: 4.3

2022-12-31

IEEE Sensors Journal

Abstract:Minimally invasive surgeries (MISs) or natural orifice transluminal endoscopic surgeries (NOTESs), such as the transurethral resection of bladder tumor (TURBT), require the surgical robot to be miniaturized to perform surgical procedures in narrow spaces. However, miniaturization of surgical robots poses problems in its fabrication and sensor integration. In this article, a miniature continuum surgical robot is proposed with force-sensing surgical forceps, which can be fabricated through a 2-D lamination process and converted into 3-D through folding. This multimaterial laminated structure facilitates the integration of photoelectric sensors into the surgical forceps. Then, the gripping force of the surgical forceps is sensed from the change of the output voltage of the integrated photoelectric sensor. The sensitivity of gripping force to the change of output voltage is 3.6 N/V, and the maximum error during calibration is 0.03 N. The proposed robot and the gripping force sensing method are validated through simulations and experiments, such as gripping and releasing objects of various hardness and heights. It is also validated that the gripping force information could also improve the gripping performance in the object handling experiment and ex vivo porcine intestine gripping experiment.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
A Compact 2-DOF Cross-Scale Piezoelectric Robotic Manipulator With Adjustable Force for Biological Delicate Puncture

Yingxiang Liu

DOI: https://doi.org/10.1109/tro.2024.3462932/mm2

IF: 7.8

2024-10-11

IEEE Transactions on Robotics

Abstract:Robotic micromanipulation technology plays a fundamental supporting role in biomedical engineering field. However, it is still a challenge for robotic manipulators to meet the puncture performance requirements for complex cells and curved vessels with different sizes, because they are difficult to achieve a comprehensive characteristic of multi-DOF, long stroke, high displacement resolution, large puncture force, and high force resolution for limitations of structures, driving elements, and actuation methods. To addresses this challenge, this article proposes the conceptual design of a piezoelectric robotic manipulator (PERM) driven by a single piezoelectric actuator. A configuration design idea and a new actuation method are elaborated to achieve 2-DOF cross-scale manipulation and adjustable puncture force. Theoretical analyses and simulations are carried out to investigate the influence of key structural parameters on displacement response and puncture force, as well as to determine the parameters. A prototype is fabricated, a dedicated handheld controller is developed, and a robotic micropuncture system is constructed to conduct characteristic testing and application research. Experimental results reveal that the manipulator achieves linear and rotary strokes of 38.5 mm and 360°, displacement resolutions of 48 nm and 0.38 μrad, a puncture force range from 1.70 to 301.34 mN, and a force resolution of 0.13 mN. Additionally, the manipulator successfully performs delicate puncture of silicone capillaries with different sizes and a curved silicone capillary under collaborative manipulation of the piezoelectric platform. This article exhibits a high-performance PERM and verifies its feasibility in micropuncture of tiny and complex-shaped organisms.

robotics
A Highly Integrated 3D MEMS Force Sensing Module With Variable Sensitivity for Robotic‐Assisted Minimally Invasive Surgery

Cheng Hou,Kaiyao Wang,Fengxia Wang,Hanyang Li,Liang Lou,Songsong Zhang,Yuandong Gu,Huicong Liu,Tao Chen,Lining Sun

DOI: https://doi.org/10.1002/adfm.202302812

IF: 19

2023-06-30

Advanced Functional Materials

Abstract:A combined MEMS–based piezoresistive 3D force sensing module, enabling force telepresence for surgeons, is demonstrated. The module features a sensor chip, a replaceable top elastic layer, and an encapsulation cap. This design ensures adjustable sensitivity and measurement range for different surgeries. Its miniature size facilitates integration into various surgical instruments, indicating its potential as a cost–effective, versatile enhancement for intelligent surgical tools. In robotic‐assisted minimally invasive surgery (RMIS), non‐sentient surgical instruments make it impossible for surgeons to perceive operational force during the procedure. To facilitate surgeons with force telepresence during surgery, a highly integrated MEMS‐based piezoresistive 3D force sensing module, which is composed of a MEMS‐based piezoresistive sensor chip, an encapsulation cap with miniature pyramids, and a top elastic layer, is demonstrated. This innovative combined construction allows for rapid replacement of elastic layers with different thicknesses and different Young's modulus, so as to realize an adjustable sensitivity and measurement range for different surgeries. By replacing the elastic layer, the same amount of change in resistance can be achieved for external force of 3 and 10 N in the Z‐axis; the sensitivity in X‐ and Y‐axes can be increased by a maximum of eight and seven times, respectively. Meanwhile, miniature size enables it to be integrated into various surgical instruments' tip. Experimental demonstrations involving palpation simulated nodule detection of kidney, ex vivo puncture, and threading forces estimation of tissue‐mimicking are conducted to validate the effectiveness of adjusting sensitivity and range. This sensing module is potentially a promising solution for low‐cost and versatility to surgical instruments, which can facilitate unification of force‐sensing/intelligent surgical instruments.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Automatic Tissue Traction Using Miniature Force-Sensing Forceps for Minimally Invasive Surgery

Tangyou Liu,Xiaoyi Wang,Jay Katupitiya,Jiaole Wang,Liao Wu

DOI: https://doi.org/10.1109/TRO.2024.3486177

2024-11-03

Abstract:A common limitation of autonomous tissue manipulation in robotic minimally invasive surgery (MIS) is the absence of force sensing and control at the tool level. Recently, our team has developed miniature force-sensing forceps that can simultaneously measure the grasping and pulling forces during tissue manipulation. Based on this design, here we further present a method to automate tissue traction that comprises grasping and pulling stages. During this process, the grasping and pulling forces can be controlled either separately or simultaneously through force decoupling. The force controller is built upon a static model of tissue manipulation, considering the interaction between the force-sensing forceps and soft tissue. The efficacy of this force control approach is validated through a series of experiments comparing targeted, estimated, and actual reference forces. To verify the feasibility of the proposed method in surgical applications, various tissue resections are conducted on ex vivo tissues employing a dual-arm robotic setup. Finally, we discuss the benefits of multi-force control in tissue traction, evidenced through comparative analyses of various ex vivo tissue resections with and without the proposed method, and the potential generalization with traction on different tissues. The results affirm the feasibility of implementing automatic tissue traction using miniature forceps with multi-force control, suggesting its potential to promote autonomous MIS. A video demonstrating the experiments can be found at <a class="link-external link-https" href="https://youtu.be/f5gXuXe67Ak" rel="external noopener nofollow">this https URL</a>.

Robotics,Human-Computer Interaction,Systems and Control
A Tele-Operated Microsurgical Forceps-Driver With a Variable Stiffness Haptic Feedback Master Device

Keehoon Kim,Sungwook Yang,Donghyun Hwang,Jinwoo Jeong,Y. Ihn,Sehyuk Yim,Sungwoo Park,Namseon Jang,Sang-Rok Oh

DOI: https://doi.org/10.1109/LRA.2020.2969161

IF: 5.2

2020-01-24

IEEE Robotics and Automation Letters

Abstract:We develop a surgical forceps-driver and a haptic feedback master device that could be applied to a tele-operated microsurgical robotic system for peripheral nerve surgery. Considering that the neurological damage could occur to the peripheral nerve when an excessive force is applied to the nerve tissue, we aim to implement the forceps-driver with precision gripping-force control and the master device capable of providing haptic feedback. For this aim, a high-precision tiny force sensor is fabricated and embedded into the forceps-driver for gripping-force measurement. And, we develop a novel master device handled by surgeon's thumb and forefinger. As a kind of a variable stiffness module, it functions to generate the forceps-drive operation command according to a surgeon's pinching motion and to display haptic feedback by varying the stiffness based on the gripping-force measured from the slave device. Thus, the surgeon can tele-operate the forceps-driver intuitively as well as feel the gripped-object by proprioceptive haptic feedback. In the performance evaluation experiments for the master-slave system, the gripping-force measurement capacity of the forceps-driver and the stiffness variation range of the master device are investigated as about 4 N with a resolution of 0.03 N and about 3.6 N/mm with a resolution of 0.025 N/mm, respectively.

Medicine,Computer Science,Engineering
Anaesthetic simulation and lessons to be learned from aviation

R. Helmreich,J. Davies

DOI: https://doi.org/10.1007/BF03011959

1997-09-01

Abstract:
Fiber-reinforced Soft Polymeric Manipulator with Smart Motion Scaling and Stiffness Tunability

Junshi Zhang,Lei Liu,Yuyu Chen,Mingliang Zhu,Liling Tang,Chao Tang,Jun Shintake,Junjie Zhao,Jiankang He,Xiaoyong Ren,Pengfei Li,Qiang Huang,Huichan Zhao,Jian Lu,Dichen Li

DOI: https://doi.org/10.1016/j.xcrp.2021.100600

IF: 8.9

2021-01-01

Cell Reports Physical Science

Abstract:Minimally invasive surgery (MIS) is emerging as a burgeoning mode of medical treatment and is widely adopted in practical clinical operations. Here, we report a soft manipulator that can actively deform and navigate through a narrow and constrained environment. Stiffness tunability, tremor filtration, and motion scaling capabilities are incorporated to ensure the position and posture of the manipulator during operation. Based on teleoperation through a handle shank, we demonstrate the capability of navigating through a complex, constrained, and narrow space of the human skeleton. By attaching a camera and syringe needle at the front tip of the soft manipulator, the capability of acupuncture treatment and in vivo drug delivery in a medical mannequin is further demonstrated. Finally, autonomous recognition and tracking systems are developed to ensure the surgeon can effortlessly teleoperate the soft manipulator to enter the human body.
Ex Situ Sensing Method for the End-Effector's Six-Dimensional Force and Link's Contact Force of Cable-Driven Redundant Manipulators

Boyang Lin,Wenfu Xu,Wenshuo Li,Han Yuan,Bin Liang

DOI: https://doi.org/10.1109/tii.2024.3369248

IF: 12.3

2024-01-01

IEEE Transactions on Industrial Informatics

Abstract:The cable-driven redundant manipulator (CDRM) possesses remarkable flexibility and holds substantial potential for application in constrained environments. To ensure both the smooth movement of the end-effector during delicate operations and the safety of interactions with the surrounding environment, real-time sensing of forces acting on both the end and links is imperative. Current in situ sensor-based methods face limitations in their applicability to CDRMs due to size and load capacity constraints. Moreover, these methods fall short in measuring contact force and its location along the entire arm. In this article, we introduce an ex situ sensing approach for capturing the six-dimensional (6-D) force at the end and the contact force on the linkages of a CDRM. First, a multispace recursive dynamic model of the CDRM is established using the Newton–Euler method. This model establishes mapping relationships among cable tensions, joint torques, and operational forces at the end-effector. Then, a simplified dynamic model for the recursive subsystem is derived based on joint motion transmission relationships and recursive equations. This model decouples the dynamic equations and provides a versatile force-sensing model. It enables the realization of 6-D force/torque sensing at the end-effector, as well as the determination of the magnitude and location of external forces acting on the links. Finally, compliant controllers are designed based on different external force-sensing methods to cater to diverse operational requirements. Experimental validation of the proposed methods is conducted on a CDRM prototype. The results demonstrate that the accuracy of end-effector force sensing exceeds 95%, torque sensing surpasses 90%, and the positioning error of the link's contact force sensing is less than 20 mm. Furthermore, the compliance controllers exhibit excellent smoothness in tasks involving human–robot interaction.

automation & control systems,computer science, interdisciplinary applications,engineering, industrial
A new hand-held force-amplifying device for micromanipulation

Guang-Zhong Yang,C. Payne,W. T. Latt

DOI: https://doi.org/10.1109/ICRA.2012.6225306

2012-05-14

Abstract:This paper presents a new hand-held device capable of amplifying delicate micromanipulation forces during minimal invasive surgical tasks. It relays force sensing to the user through a simple sliding feature that is coupled to the surgical tool, which translates relative to the casing of the device held by the operator. This forgoes the need of grounding frames or anchoring mechanisms to the body, allowing the device to be used in general surgical environments without affecting the workflow. The device uses a three-phase linear motor that is compact and capable of generating high forces that allow amplification factors of up to ×15. It features a closed-loop force control scheme to perform the required force amplification in which the force exerted on to the user is measured, forming the feedback in the control loop. The device permits interchangeability of instrumentation through a simple docking feature, and thus can be generalized to a range of surgical instruments for micromanipulation tasks. Detailed bench tests and user trials have been performed to validate the accuracy and practical performance of the device. The results have shown a five times reduction of the minimum force threshold perceived by the subjects and ergonomically sound manipulation advantages.

Engineering,Medicine,Computer Science
A Minimally Invasive Robotic Tissue Palpation Device

Mohammad Mir,Jiawen Chen,Aneri Patel,Meghan R. Pinezich,Brandon A. Guenthart,Gordana Vunjak-Novakovic,Jinho Kim

DOI: https://doi.org/10.1109/tbme.2024.3357293

IF: 4.6

2024-01-01

IEEE Transactions on Biomedical Engineering

Abstract:OBJECTIVE: Robot-assisted minimally invasive surgery remains limited by the absence of haptic feedback, which surgeons routinely rely on to assess tissue stiffness. This limitation hinders surgeons' ability to identify and treat abnormal tissues, such as tumors, during robotic surgery.METHODS: To address this challenge, we developed a robotic tissue palpation device capable of rapidly and noninvasively quantifying the stiffness of soft tissues, allowing surgeons to make objective and data-driven decisions during minimally invasive procedures. We evaluated the effectiveness of our device by measuring the stiffness of phantoms as well as lung, heart, liver, and skin tissues obtained from both rats and swine.RESULTS: Results demonstrated that our device can accurately determine tissue stiffness and identify tumor mimics. Specifically, in swine lung, we determined elastic modulus (E) values of 9.1 ± 2.3, 16.8 ± 1.8, and 26.0 ± 3.6 kPa under different internal pressure of the lungs (PIP) of 2, 25, and 45 cmH2O, respectively. Using our device, we successfully located a 2- cm tumor mimic embedded at a depth of 5 mm in the lung subpleural region. Additionally, we measured E values of 33.0 ± 5.4, 19.2 ± 2.2, 33.5 ± 8.2, and 22.6 ± 6.0 kPa for swine heart, liver, abdominal skin, and muscle, respectively, which closely matched existing literature data.CONCLUSION/SIGNIFICANCE: Results suggest that our robotic palpation device can be utilized during surgery, either as a stand-alone or additional tool integrated into existing robotic surgical systems, to enhance treatment outcomes by enabling accurate intraoperative identification of abnormal tissue.

engineering, biomedical

Inositol 1,3,4,5-tetrakisphosphate as a mediator of neuronal death in ischemic hippocampus

Development and Control of A Robotic Arm for Percutaneous Surgery

Haptics-Enabled Forceps with Multi-Modal Force Sensing: Towards Task-Autonomous Surgery

Laser-Profiled Continuum Robot with Integrated Tension Sensing for Simultaneous Shape and Tip Force Estimation

A Tension Sensor Array for Cable-Driven Surgical Robots

An Integrated 3D MEMS Force Sensing and Feedback System for Robot-Assisted Minimally Invasive Surgery

A Force-Feedback Methodology for Teleoperated Suturing Task in Robotic-Assisted Minimally Invasive Surgery

A Hybrid Method Combining Data-Driven and Model-Based Algorithms for External Force-Sensing and Haptics Control of Cable-Pulley-Driven Surgical Robotic Manipulator

Multifunctional Robotic Surgical Forceps With Tactile Sensor Array for Tissue Palpation and Clamping Status Detection

A Modular 3-Degree-of-Freedom Force Sensor for Robot-assisted Minimally Invasive Surgery Research

Precise and High-Load Capacity Miniature 6-DOF Manipulator for Microsurgery

A Laminated Continuum Robot With Gripping Force-Sensing Forceps for Robot-Assisted Minimally Invasive Surgeries

A Compact 2-DOF Cross-Scale Piezoelectric Robotic Manipulator With Adjustable Force for Biological Delicate Puncture

A Highly Integrated 3D MEMS Force Sensing Module With Variable Sensitivity for Robotic‐Assisted Minimally Invasive Surgery

Automatic Tissue Traction Using Miniature Force-Sensing Forceps for Minimally Invasive Surgery

A Tele-Operated Microsurgical Forceps-Driver With a Variable Stiffness Haptic Feedback Master Device

Anaesthetic simulation and lessons to be learned from aviation

Fiber-reinforced Soft Polymeric Manipulator with Smart Motion Scaling and Stiffness Tunability

Ex Situ Sensing Method for the End-Effector's Six-Dimensional Force and Link's Contact Force of Cable-Driven Redundant Manipulators

A new hand-held force-amplifying device for micromanipulation

A Minimally Invasive Robotic Tissue Palpation Device