Abstract:Semiconductor refrigeration utilizes Peltier effects to achieve cooling, and does not use any refrigerants. Due to its simple and compact structure, semiconductor refrigeration has become one of the most promising cooling technologies. However, as a semiconductor refrigeration system, the interactions among the main external factors that affect its performance are complicated. Based on experimental results and thermodynamic models, deeper insights are presented into semiconductor refrigeration in this study. Broader coupling between performance and main external parameters are analyzed, including the driving voltage of fans at both the hot and cold sides, and the working voltage of the semiconductor refrigeration chip. Optimal external parameters corresponding to a maximum COP and a maximum cooling capacity are obtained. For example, under the optimal working voltage of a semiconductor refrigeration chip with a fan driving voltage of 4 V at the hot side and 6 V at the cold side, Q(c,max) was increased by 60%, and was 326% higher than chips under 2 V and 10 V working voltages. Under the optimal fan driving voltage at the hot side with a 6 V fan driving voltage at the cold side and a 3 V working voltage of the chip, the maximum value of COP was respectively 140.3% and 104.3% larger than those with 0 V and 12 V fan driving voltages at the hot side. It is also found that the driving voltage of fans at the hot side has a greater influence on the optimal working voltage of a semiconductor refrigeration chip. This investigation could be applied in the optimization of the design and operational control of semiconductor refrigeration systems. (C) 2019 Elsevier Ltd and IIR. Allrights reserved.

Cascaded superconducting junction refrigerators: Optimization and performance limits

A cascade electronic refrigerator using superconducting tunnel junctions

Utilization of Ultra-Low Temperature Heat by a Novel Cascade Refrigeration System with Environmentally-Friendly Refrigerants

Investigations on Coupling Between Performance and External Operational Conditions for a Semiconductor Refrigeration System

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Efficient electronic cooling above 2 K by niobium-based superconducting tunnel junctions

High-performance electronic cooling with superconducting tunnel junctions

Superconducting quantum refrigerator: Breaking and rejoining Cooper pairs with magnetic field cycles

A novel low-temperature absorption–compression cascade refrigeration system

Cryogenic Cooling Using Tunneling Structures with Sharp Energy Features.

Micrometre-scale refrigerators

Correlation-induced refrigeration with superconducting single-electron transistors

Radio-Frequency Single-Electron Refrigerator

On-Chip Cooling by Heating with Superconducting Tunnel Junctions

Superconductor-quantum dot hybrid coolers

Observations and modeling of large area normal-metal/insulator/superconductor refrigerator cooling from 300 mK to below 100 mK

Phonon-blocked junction refrigerators for cryogenic quantum devices

Cyclic Superconducting Quantum Refrigerators Using Guided Fluxon Propagation

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Nonlinear chiral refrigerators

Information entropic superconducting microcooler