[CYTOLOGIC AND DYNAMIC EXAMINATION OF INFLAMMATORY SKIN EXUDATE IN HEALTHY SUBJECTS AND PATIENTS WITH VARIOUS FORMS OF LEUKEMIA].

J. Aleksandrowicz,J. Blicharski,M. CZY'ZEWSKA WAZEWSKA,T. Cichocki

1965-01-18

Abstract:

What problem does this paper attempt to address?

Hierarchical 3D All-Carbon Composite Structure Modified with N-Doped Graphene Quantum Dots for High-Performance Flexible Supercapacitors

Zhen Li,Xiang Liu,Liang Wang,Fan Bu,Junjie Wei,Dengyu Pan,Minghong Wu

DOI: https://doi.org/10.1002/smll.201801498

IF: 13.3

2018-01-01

Small

Abstract:Flexible supercapacitors have shown enormous potential for portable electronic devices. Herein, hierarchical 3D all-carbon electrode materials are prepared by assembling N-doped graphene quantum dots (N-GQDs) on carbonized MOF materials (cZIF-8) interweaved with carbon nanotubes (CNTs) for flexible all-solid-state supercapacitors. In this ternary electrode, cZIF-8 provides a large accessible surface area, CNTs act as the electrical conductive network, and N-GQDs serve as highly pseudocapactive materials. Due to the synergistic effect and hierarchical assembly of these components, N-GQD@cZIF-8/CNT electrodes exhibit a high specific capacitance of 540 F g(-1) at 0.5 A g(-1) in a 1 m H2SO4 electrolyte and excellent cycle stability with 90.9% capacity retention over 8000 cycles. The assembled supercapacitor possesses an energy density of 18.75 Wh kg(-1) with a power density of 108.7 W kg(-1). Meanwhile, three supercapacitors connected in series can power light-emitting diodes for 20 min. All-solid-state N-GQD@cZIF-8/CNT flexible supercapacitor exhibits an energy density of 14 Wh kg(-1) with a power density of 89.3 W kg(-1), while the capacitance retention after 5000 cycles reaches 82%. This work provides an effective way to construct novel electrode materials with high energy storage density as well as good cycling performance and power density for high-performance energy storage devices via the rational design.
Assembling Nitrogen and Oxygen Co-Doped Graphene Quantum Dots Onto Hierarchical Carbon Networks for All-Solid-state Flexible Supercapacitors

Zhen Li,Yanfeng Li,Liang Wang,Ling Cao,Xiang Liu,Zhiwen Chen,Dengyu Pan,Minghong Wu

DOI: https://doi.org/10.1016/j.electacta.2017.03.147

IF: 6.6

2017-01-01

Electrochimica Acta

Abstract:We present a novel approach for hierarchical fabrication of high-performance, all-solid-state, flexible supercapacitors from environmentally friendly all-carbon materials. Three-dimensional carbon nanotube/carbon cloth network (CNT/CC) is used as a conductive, flexible and free-standing scaffold for the electro-deposition of highly N/O co-doped graphene quantum dots to form the high-activity, all-carbon electrodes. The hierarchical structure of the CNT/CC network with high electrical conductivity and high surface area provides improved conductive pathways for the efficient activation of GQDs with high pseudocapacitance and electrical double layer capacitance. The obtained N-O-GQD/CNT/CC electrodes for all-solid-state flexible supercapacitors exhibit an ultrahigh areal capacitance of up to 461 mF cm (2) at a current density of 0.5 mA cm (2), while keeping high rate and cyclic performances. This work highlights the great potential of highly active GQDs in the construction of high-performance flexible energy-storage devices.(C) 2017 Elsevier Ltd. All rights reserved.
Hierarchical Construction of High-Performance All-Carbon Flexible Fiber Supercapacitors with Graphene Hydrogel and Nitrogen-Doped Graphene Quantum Dots

Zhen Li,Junjie Wei,Jing Ren,Xiaomin Wu,Liang Wang,Dengyu Pan,Minghong Wu

DOI: https://doi.org/10.1016/j.carbon.2019.08.040

IF: 10.9

2019-01-01

Carbon

Abstract:Carbon-based flexible fiber-based supercapacitors (FFSCs) are promising power sources for portable and wearable electronics, but their applications are limited by low energy density due to a lower specific capacitance of common carbon materials. We fabricated ternary all-carbon fiber electrodes (N-GQD/GH/CF) with improved electrochemical performance. In this structure, graphene hydrogel (GH) was grown on carbon fibers (CFs) to form a 3D interconnected porous network (GH/CF), and nitrogen-doped graphene quantum dots (N-GQDs) with high pseudocapacitive activity were electrodeposited into the GH/CF network. The ternary N-GQD/GH/CF hybrid electrode delivered a volumetric capacitance of 93.7 F cm(-3) at 20 mA cm(-3), which was around 7 times higher than that of the GH/CF, while the capacitance retention after 5000 cycles reached 87.9%, which was only a little lower than that of the GH/CF electrode (90.2%). It indicates the introduction of N-GQDs drastically improves the capacitance of the FFSCs without sacrificing the cycle stability. All-carbon asymmetric FFSCs were assembled using N-GQD/GH/CF as positive electrode and GH/CF as negative electrode. The assembled FFSCs exhibited a high energy density of 3.6 mW h cm(-3) at power density of 35.6 mW cm(-3) owing to the wider potential window (2 V) and the higher volumetric capacitance as well as excellent flexibility and cycling stability. (C) 2019 Elsevier Ltd. All rights reserved.
Flexible Solid‐State Supercapacitors with Enhanced Performance from Hierarchically Graphene Nanocomposite Electrodes and Ionic Liquid Incorporated Gel Polymer Electrolyte

Kai Wang,Xianzhong Sun,X. Ge,Chen Li,Lanxiang Feng,Yanwei Ma,Xiong Zhang

DOI: https://doi.org/10.1002/adfm.201704463

Abstract:High energy density, durability, and flexibility of supercapacitors are required urgently for the next generation of wearable and portable electronic devices. Herein, a novel strategy is introduced to boost the energy density of flexible soild‐state supercapacitors via rational design of hierarchically graphene nanocomposite (GNC) electrode material and employing an ionic liquid gel polymer electrolyte. The hierarchical graphene nanocomposite consisting of graphene and polyaniline‐derived carbon is synthesized as an electrode material via a scalable process. The meso/microporous graphene nanocomposites exhibit a high specific capacitance of 176 F g−1 at 0.5 A g−1 in the ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF4) with a wide voltage window of 3.5 V, good rate capability of 80.7% in the range of 0.5–10 A g−1 and excellent stability over 10 000 cycles, which is attributed to the superior conductivity (7246 S m−1), and quite large specific surface area (2416 m2 g−1) as well as hierarchical meso/micropores distribution of the electrode materials. Furthermore, flexible solid‐state supercapacitor devices based on the GNC electrodes and gel polymer electrolyte film are assembled, which offer high specific capacitance of 180 F g−1 at 1 A g−1, large energy density of 75 Wh Kg−1, and remarkable flexible performance under consecutive bending conditions.

Chemistry,Engineering,Materials Science
Tuning the Electronic and Electrochemical Properties of 3D Porous Laser‐Induced Graphene by Electrochemically Induced Deposition of Polyoxovanadate Nanoclusters for Flexible Supercapacitors

Nikhil Arya,Sirshendu Dinda,Thomas Diemant,Ke Wang,Maximilian Fichtner,Montaha Anjass

DOI: https://doi.org/10.1002/adfm.202410943

IF: 19

2024-08-24

Advanced Functional Materials

Abstract:Electrochemical deposition of polyoxovanadate nanoclusters (K5(CH3CN)3[V12O32Cl] (= K5{V12}) onto the highly porous laser‐induced graphene (LIG) substrats results in tuning the electronic and electrochemical properties of LIG electrodes, and enabled the fabrication of flexible solid‐state supercapacitor with superior electrochemical performance and mechanical stability. The advancement of microelectronic devices mandates the development of flexible energy storage systems to enable the fabrication of miniaturized and wearable electronics. Herein, a sustainable approach is demonstrated for tuning the electronic and electrochemical properties of hierarchically porous laser‐induced graphene (LIG) substrates. The methodology entails the electrochemical deposition of polyoxovanadate nanoclusters (K5(CH3CN)3[V12O32Cl] (= K5{V12}) onto the highly porous LIG matrix. The comprehensive characterization is integrated through micro‐Raman spectroscopy and in‐depth X‐ray photoelectron spectroscopy to elucidate the deposition mechanism and electronic properties of the fabricated electrode. The results indicate a significant correlation between the orientation of the deposited clusters and the non‐crystalline regions of the LIG structure. Additionally, the cluster deposition results in a reduction of grain boundary defects in the nano‐graphite lattice of LIG. The optimized electrode exhibits enhanced areal capacitance (CA) of 125 mF cm−2 at a current density of 0.1 mA cm−2, representing a fivefold improvement compared to the undoped LIG substrate. Furthermore, as a proof of concept, a flexible solid‐state symmetrical supercapacitor device, fabricated with a PVA‐H2SO4 gel electrolyte, demonstrates an areal capacitance of 24.92 mF cm−2 at current density of 0.1 mA cm−2 and exhibits exceptional cycling stability, enduring up to 5000 consecutive galvanostatic charge‐discharge cycles.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Membrane-assisted Assembly Strategy of Flexible Electrodes for Multifunctional Supercapacitors

Changda Wang,Chuanqiang Wu,Shuangming Chen,Xiangchen Zhao,Wenjie Xu,Zhiqiang Niu,Li Song

DOI: https://doi.org/10.1016/j.carbon.2017.09.087

IF: 10.9

2017-01-01

Carbon

Abstract:Developing flexible electrode is essential for new generation wearable electronics and energy devices. Combining with membrane-assisted vacuum filtration, highly flexible and stable hybridized electrodes, containing of S-doped graphene, carbon nano-onion (OLC) and Ni3S2 composite (GCNi(3)S(2)) are obtained. X-ray absorption characterizations reveal the transfer of electrons from C to Ni atoms due to the tight interface between Ni3S2 and GO/OLC, indicating the synergistic effect on fast redox reaction and ultra-short ion diffusion pathway among the hybrid electrodes. The assembled flexible symmetrical all-solid-state supercapacitor exhibits high volumetric capacitance of 55.3 F cm(-3), along with an outstanding energy density of 3.63 Wh cm(-3) and excellent stability of 5000 cycles with 97.2% capacitance remaining. The bending tests further confirm outstanding flexible performance in the capacitor device. Moreover, the assembled micro supercapacitor with GCNi(3)S(2) electrode indicates the advantage of this membrane-assisted assembled strategy for easily realizing various flexible films as multitype supercapacitor's electrode which is otherwise difficult for powder-like materials. (C) 2017 Elsevier Ltd. All rights reserved.
Porous Multishelled Nio Hollow Microspheres Encapsulated Within Three-Dimensional Graphene As Flexible Free-Standing Electrodes For High-Performance Supercapacitors

Zhifang Zhang,Xiaorui Su,Yanyan Zhu,Zhonghui Chen,Zebo Fang,Xiaojing Luo

DOI: https://doi.org/10.1039/c9nr05117a

IF: 6.7

2019-01-01

Nanoscale

Abstract:Exploration of electrode materials with well-defined nanostructures and good flexibility is an efficient approach for achieving high-performance and flexible energy storage systems. However, it is still challenging to well integrate active materials into flexible electrodes and simultaneously maintain satisfactory electrochemical performance. Herein, we successfully synthesize novel three-dimensional graphene (3DG)-encapsulated porous multishelled NiO hollow microsphere (3DG/pMS-NiO) composite aerogels via a modified self-templating method and a dopamine (DA)-assisted self-assembly route. The well-designed highly interconnected porous 3DG network and the close contact NiO-graphene structure of the 3DG/pMS-NiO composite aerogels offer multiple advantages such as high porosity and accessible area, improved conductivity, enhanced electrolyte diffusion and a simple electrode preparation process. Thus, the as-prepared flexible 3DG/pMS-NiO electrodes showed significantly improved specific capacitance of 710.4 F g(-1) at 0.5 A g(-1) and excellent rate capability with an ultrahigh capacitance retention of 92.5% at 10 A g(-1). In addition, the fabricated asymmetric supercapacitors (3DG/pMS-NiO//AC) showed a high specific capacitance of 34.4 F g(-1) at 1 A g(-1) with a voltage window of 0-1.6 V, a large energy density of 12.3 W h kg(-1) at a power density of 815.3 W kg(-1), and a decent cycling stability. This work profoundly enlightens the material design and electrode preparation, and even opens up an avenue for the development of high-performance and flexible energy storage systems.
Three-Dimensional Functionalized Graphenes with Systematical Control over the Interconnected Pores and Surface Functional Groups for High Energy Performance Supercapacitors

Weiqian Tian,Qiuming Gao,Yanli Tan,Yunlu Zhang,Jiandong Xu,Zeyu Li,Kai Yang,Lihua Zhu,Zhengping Liu

DOI: https://doi.org/10.1016/j.carbon.2015.01.001

IF: 10.9

2015-01-01

Carbon

Abstract:Three-dimensional functionalized multilayer graphenes (3D FMG) with systematically controllable interconnected pores and surface functional groups are prepared by using combined hydrochloric acid-assisted ultrasonic exfoliation and thermal reduction approach. Electrochemical analyses show that the optimized 3D FMG owns an amazing high specific capacitance of 508Fg−1 at 5mVs−1 in aqueous electrolyte system. The energy density of 15, 32, and 66Whkg−1 has been obtained at the power density of 14, 43, and 52kWkg−1 for the 3D FMG-based supercapacitor in the aqueous, organic and ionic liquid electrolyte system, respectively. 94% of the initial capacitance of the 3D FMG-based supercapacitor is retained after 10,000 cycles at 1Ag−1 in the aqueous system. The outstanding electrochemical performances of the 3D FMG are attributed to the strong synergistic effect of the interconnected pores and surface functional groups. The hierarchical interconnected pore channels can efficiently facilitate the ionic/electronic transports between the electrodes and electrolyte ions and appropriately prevent the restacking of graphene sheets. The rational surface functional groups may improve a facile accessibility of the electrodes with the electrolytes and provide an additional pseudocapacitance.
Flexible Solid-State Supercapacitors Based on Three-Dimensional Graphene Hydrogel Films

Yuxi Xu,Zhaoyang Lin,Xiaoqing Huang,Yuan Liu,Yu Huang,Xiangfeng Duan

DOI: https://doi.org/10.1021/nn4000836

IF: 17.1

2013-04-11

ACS Nano

Abstract:Flexible solid-state supercapacitors are of considerable interest as mobile power supply for future flexible electronics. Graphene or carbon nanotubes based thin films have been used to fabricate flexible solid-state supercapacitors with high gravimetric specific capacitances (80-200 F/g), but usually with a rather low overall or areal specific capacitance (3-50 mF/cm(2)) due to the ultrasmall electrode thickness (typically a few micrometers) and ultralow mass loading, which is not desirable for practical applications. Here we report the exploration of a three-dimensional (3D) graphene hydrogel for the fabrication of high-performance solid-state flexible supercapacitors. With a highly interconnected 3D network structure, graphene hydrogel exhibits exceptional electrical conductivity and mechanical robustness to make it an excellent material for flexible energy storage devices. Our studies demonstrate that flexible supercapacitors with a 120 μm thick graphene hydrogel thin film can exhibit excellent capacitive characteristics, including a high gravimetric specific capacitance of 186 F/g (up to 196 F/g for a 42 μm thick electrode), an unprecedented areal specific capacitance of 372 mF/cm(2) (up to 402 mF/cm(2) for a 185 μm thick electrode), low leakage current (10.6 μA), excellent cycling stability, and extraordinary mechanical flexibility. This study demonstrates the exciting potential of 3D graphene macrostructures for high-performance flexible energy storage devices.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Flexible Solid-State Supercapacitor Fabricated by Metal-Organic Framework/graphene Oxide Hybrid Interconnected with PEDOT

Dongying Fu,Haowen Li,Xian-Ming Zhang,Gaoyi Han,Haihan Zhou,Yunzhen Chang

DOI: https://doi.org/10.1016/j.matchemphys.2016.05.024

IF: 4.778

2016-01-01

Materials Chemistry and Physics

Abstract:We have successfully synthesized the Hong Kong University of Science and Technology-1 (HKUST-1) metal organic framework (MOF)-graphene oxide (GO) hybrids (noted as H-G) onto carbon nanotube film (CNTF) and further electrochemically deposited poly(3,4-ethylenedioxythiophene) (PEDOT) to give a flexible conductive porous electrode (noted as PEDOT/H-G-CNTF), which shows excellent electrochemical performance due to the mesoporous structure of H-G in PEDOT/H-15G-CNTF hybrid. Electrochemical studies show that the PEDOT/H-15G-CNTF exhibits an exceptional areal capacitance of 128 mF cm(-2) at 10 mV s(-1) than that of PEDOT/HKUST-1-CNTF (81 mF cm(-2)) in a three-electrode system, indicating that the incorporation of GO into the hybrids effectively boosts the capacitive performance of PEDOT/HKUST-1-CNTF. To further explore the capacitive performance of PEDOT/H-15G-CNTF electrode, a symmetric flexible solid-state supercapacitor has also been assembled and tested. The assembled optimum flexible supercapacitor shows superior areal capacitance (37.8 mF cm(-2)) at the scan rate of 5 mV s(-1), and good charge/discharge capability using PVA/H3PO4 gel electrolyte. The volumetric energy density for this device is calculated to be 0.051 mWh cm(-3), with a volumetric power density is 2.1 mW cm(-3) at current density of 0.4 mA cm(-2). The device exhibits the excellent electrochemical property and mechanical properties under different bending angles. (C) 2016 Elsevier B.V. All rights reserved.
Wet-spun Poly(ionic Liquid)-Graphene Hybrid Fibers for High Performance All-Solid-state Flexible Supercapacitors

Karthikeyan Gopalsamy,Qiuyan Yang,Shengying Cai,Tieqi Huang,Zhengguo Gao,Chao Gao

DOI: https://doi.org/10.1016/j.jechem.2018.10.007

2019-01-01

Abstract:It is crucial to develop flexible and wearable electronic devices that have attracted tremendous interest due to their merits on compactness, flexibility and high capacitive properties. Herein we report the continuously ordered macroscopic poly(ionic liquid)-graphene fibers by wet spinning method via liquid crystal assembly for supercapacitor application. The fabricated all-solid-state supercapacitors exhibited a high areal capacitance (268.2 mF cm(-2)) and volumetric capacitance (204.6 F cm(-3)) with an outstanding areal energy density (9.31 mu Wh cm(-2)) and volumetric energy density (8.28 mWh cm (-3)). The fiber supercapacitors demonstrated exceptional cycle life for straight electrodes of about 10,000 cycles (94.2% capacitance retention) and flexibility at different angles (0 degrees, 45 degrees, 90 degrees, 180 degrees) along with a good flexible cycling stability after 6000 cycles (92.7% capacitance retention). To date, such a novel poly (ionic liquid)-graphene fiber supercapacitors would be a new platform in real-time flexible electronics. (C) 2018 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.
Flexible and Alternately Layered High‐Loading Film Electrode based on 3D Carbon Nanocoils and PEDOT:PSS for High‐Energy‐Density Supercapacitor

Hui Huang,Yongpeng Zhao,Tianze Cong,Chengwei Li,Ningxuan Wen,Xueqing Zuo,Yuan Guo,Hao Zhang,Zeng Fan,Lujun Pan

DOI: https://doi.org/10.1002/adfm.202110777

IF: 19

2022-02-24

Advanced Functional Materials

Abstract:The development of flexible carbon‐based film electrodes with high loading and sufficient electron/ion transport channels is of great significance but still challenging. Herein, a flexible high‐loading (over 15 mg cm–2) film with 3D hierarchical pores is prepared by an alternate deposition of carbon nanocoils (CNCs) and poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The unique alternate architecture of CNC/PEDOT:PSS bilayers possesses porous structure constructed by interconnected CNCs, which serves as transfer channels and storage chambers of ions. Meanwhile, the PEDOT:PSS layers anchoring CNCs function as not only the cement to ensure the stability of the film structure but also the current collectors to improve electron transfer kinetics between interlayers. The film electrode shows excellent flexibility and electrochemical properties. It delivers a high areal capacitance of 1402.5 mF cm–2 at 0.25 mA cm–2 and a superior stability even at an extremely high current density of 50 mA cm–2 after 10 000 cycles. The corresponding solid‐state supercapacitor has great energy storage ability and steady capacitance response under various deformation. The device achieves a superb energy density of 211 μW h cm–2 with a wide potential window of 2 V. This strategy paves a road for the controllable fabrication of high‐performance flexible electrodes and supercapacitors. A flexible and high‐mass‐loading (over 15 mg cm−2) film with 3D connected hierarchical pores is constructed by an alternate layer‐by‐layer deposition of carbon nanocoils (CNCs) and poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The alternatively layered film shows an ideal electrode structure in which electrons transfer along the 3D conductive network of PEDOT:PSS and CNCs, while ions are transported and stored in the connected pores.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Facile fabrication of hierarchically porous graphene/poly(1,5-diaminoanthraquinone) nanocomposite fibers as flexible and robust free-standing electrodes for solid-state supercapacitors

Juanli Liu,Dongshan Wang,Jinmei Li,Peng Liu

DOI: https://doi.org/10.1016/j.jtice.2021.07.017

IF: 5.477

2021-09-01

Journal of the Taiwan Institute of Chemical Engineers

Abstract:Hierarchically porous ErGO/PDAA nanocomposite fibers as electrodes.Integrating micro-/mesopores in PDAA and macropores in spaced ErGO sheets.Excellent comprehensive property were achieved with PDAA nanotubes.Fiber-shaped supercapacitors have attracted more and more interests for portable/wearable electronics. However, the practical application is suffering from their tedious fabrication and limited electrochemical performance.Here, hierarchically porous graphene/poly(1,5-diaminoanthraquinone) nanocomposite (ErGO/PDAA) fibers were fabricated as flexible and robust free-standing electrodes for supercapacitors, via facile coagulation of expanded graphene oxide (EGO) and PDAA nanomaterials with different morphologies, such as nanoparticles (PNPs), nanotubes (PNTs), and nanoribbons (PNRs), in CaCl2 bath, followed by reduction with hydroiodic acid (HI).All the three ErGO/PDAA fibers showed distinctly enhanced electrochemical property than the ErGO fiber. Furthermore, with the same feeding ratio of EGO and PDAA (6:4), the ErGO/PNTs fiber possessed better electrochemical capacitive property than the other two, ErGO/PNPs and ErGO/PNRs fibers, owing to the unique hierarchical pores. The solid-state symmetric supercapacitor (SSC) possessed specific capacitance, energy and power densities of 35.0 mF cm−1, 3.11 mWh cm−1, and 61.4 mW cm−1, respectively, and retained 83.3% of its initial capacitance after 5000 cycles.Download : Download high-res image (172KB)Download : Download full-size image

engineering, chemical
Highly Compressible Three-Dimensional Graphene Hydrogel for Foldable All-Solid-state Supercapacitor

Xianbin Liu,Shuai Zou,Kaixi Liu,Chao Lv,Ziping Wu,Yanhong Yin,Tongxiang Liang,Zailai Xie

DOI: https://doi.org/10.1016/j.jpowsour.2018.02.087

IF: 9.2

2018-01-01

Journal of Power Sources

Abstract:The fabrication of three-dimensional (3D) graphene-based macroscopic materials with superior mechanical and electrical properties for flexible energy storage devices is still extremely challenging. Here, we report a novel 3D graphene hydrogel decorated by the biomass phytic acid (PAGH) with developed porosity and strengthen mechanical property via hydrothermal and freeze-drying methods. The phytic acid molecules are intercalated into the graphene sheets, enabling robust network structure. This induces the formation of materials with larger specific surface area, lower density and enhanced compressive strength compared with pure GH. When directly employed as an electrode, the PAGH exhibits a high specific capacitance of 248.8 F g(-1) at 1 A g(-1) and excellent rate performance of 67.9% as current density increasing to 20 A g(-1). Furthermore, the all-solid-state super capacitor based PAGH can deliver outstanding cycle life (86.2% after cycling 10,000 times), glorious energy density (26.5 Wh kg(-1)) and power density (5135.1 W kg(-1)). The prepared device shows stable electrochemical behaviors at random bending angles. Therefore, the present work will open a new avenue to design and fabricate new flexible and portable graphene-based electrodes for future applications in energy storage devices.
[Absence of linkage disequilibrium at amyloid precursor protein gene locus in Japanese familial Alzheimer's disease with 717Val-->Ile mutation].

H. Tanaka,S. Naruse,T. Miyatake,S. Tsuji

1993-09-01

Abstract:To date, eleven independent early onset familial Alzheimer's disease (EOFAD) pedigrees with the 717Val-->Ile mutation of amyloid precursor protein (APP) gene have been identified. Interestingly, five pedigrees have been of Japanese origin. The apparent ethnic prediction of this mutation raises the possibility that there is a founder effect in Japan. If the hypothesis holds true, we can expect the presence of linkage disequilibrium at the APP locus. We did not, however, observe any significant linkage disequilibrium at any locus of APP or the adjacent GT12 locus in the five Japanese EOFAD probands with the 717Val-->Ile mutation. The result indicates that a founder effect would probably not be present in Japanese EOFAD pedigrees with the 717Val-->Ile mutation.
Rationally engineered interdigitated electrodes with heteroatom doped porous graphene and improved surface wettability for flexible micro-supercapacitors

Jihong Kim,Sung Min Wi,Sangjun Son,HeeYoung Lim,Yeonsu Park,A-Rang Jang,Jong Bae Park,Younghyun Cho,Young-Chul Song,Sangyeon Pak,Young-Woo Lee

DOI: https://doi.org/10.1016/j.est.2024.111271

IF: 9.4

2024-03-27

Journal of Energy Storage

Abstract:Micro-supercapacitors (mSCs) are crucial components for the miniaturization of electronic devices and the growing demand for portable, wearable, and Internet-of-things (IoT) technology. Among these, electric double-layer mSCs (EDL mSCs) stand out with their rapid charge/discharge capability and extended lifespan. Porous graphene structure has been utilized to EDL-mSCs due to their compatibility with various substrates and ease of integration. However, methods to increase the performance of the EDL-mSCs based on the porous graphene electrode needs to be considered to achieve high performance flexible mSCs. In this study, we introduce rationally designed, heteroatom doped porous graphene electrodes, incorporating highly electrochemical active nitrogen sites (such as pyrrolic-, pyridinic-, and graphitic-N sites), that greatly enhances the performance of the flexible mSCs. The method involves directly laser scribing polyimide film coated with a phthalocyanine-based dopant, resulting in a remarkable 254 % increase in capacitance and an impressive volumetric energy density of 2.5 mWh cm −3 compared pristine EDL-mSC. This heteroatom-doping strategy improves conductivity and surface wettability and creates more active sites for specific capacitance. Additionally, the heteroatom-doped mSCs exhibit excellent capacitance retention under strain and bending tests, demonstrating their suitability for practical circuit applications. This work offers a simple and effective approach to design flexible and high-performance mSCs, meeting the energy-storage demands of modern electronics and IoT devices.

energy & fuels
A Flexible Solid-State Supercapacitor Based on Graphene/polyaniline Paper Electrodes

Kang Li,Xuanli Liu,Song Chen,Wei Pan,Jintao Zhang

DOI: https://doi.org/10.1016/j.jechem.2018.07.014

IF: 13.1

2019-01-01

Journal of Energy Chemistry

Abstract:The direct coating of graphene sheets obtained by electrochemical exfoliation on commercial paper ren- ders the preparation of highly conductive flexible paper substrate for subsequent deposition of polyani- line (PANi) nanorods via electrochemical polymerization. The deposition of PANi can be well-controlled by adjusting the electrochemical polymerization time, leading to the formation of PANi coated graphene paper (PANi-GP). The as-prepared electrode exhibited high areal capacitance of 176 mF cm ? 2 in three- electrode system at a current density of 0.2 mA cm ? 2 , which is around 10 times larger than that of pris- tine graphene paper due to the pseudocapacitive behavior of PANi. In-situ Raman test was used to de- termine the molecular changes during redox process of PANi. More importantly, all-solid-state symmetric capacitor assembled with two PANi-GP electrodes in a polymer electrolyte delivered an areal capacitance of 123 mF cm ? 2 , corresponding to an areal energy density of 17.1 μWh cm ? 2 and an areal power density of 0.25 mW cm ? 2 . The symmetric capacitor held a capacitive retention of 74.8％ after 500 bending tests from 0 to 120 °, suggesting the good flexibility and mechanical stability. These results showed the great promising application in flexible energy-storage devices.
Three dimensional few layer graphene and carbon nanotube foam architectures for high fidelity supercapacitors

wei wang,shirui guo,miroslav penchev,isaac ruiz,krassimir n bozhilov,dong yan,mihrimah ozkan,cengiz s ozkan

DOI: https://doi.org/10.1016/j.nanoen.2012.10.001

IF: 17.6

2013-01-01

Nano Energy

Abstract:Supercapacitors are promising alternative energy storage systems due to their relatively fast rate of energy storage and delivery. We describe a simple and scalable method to fabricate three-dimensional (3D) few-layer graphene/multi-walled carbon nanotube (MWNT) hybrid nanostructures on industrial grade metal foam foils (nickel foam) via a one-step ambient pressure chemical vapor deposition (APCVD) process. The as-grown few-layer graphene/MWNT nanocarbon foams are in the form of a homogeneous and densely packed hierarchical nanostructures and possess a very large surface area of 743m2g−1. Symmetrical electrochemical double-layer capacitors (EDLCs) of 3D hybrid hierarchical few-layer graphene/MWNT nanostructures show a high specific capacitance of 286Fg−1 which leads to an energy density of 39.72Whkg−1 and a superior power density of up to 154.67kWkg−1. Moreover, the capacitance retention of 99.34% after 85000 charge–discharge cycles demonstrates the very high stability of the electrode architectures for supercapacitors. These merits enable the innovative 3D hierarchical few-layer graphene/MWNT foam to serve as high performance EDLC electrodes, resulting in energy storage devices with very high stability and power density.
Hierarchical graphene oxide/manganese dioxide/cobalt-nickel layered double hydroxide electrodes for high energy density asymmetric flexible supercapacitor

Xue Li,Zhongtai Lin,Chunjin Wang,Haowen Wang,Shixuan Feng,Tingxi Li,Yong Ma

DOI: https://doi.org/10.1016/j.cej.2024.149430

IF: 15.1

2024-03-01

Chemical Engineering Journal

Abstract:Currently, the limited energy density constrains potential applications of flexible supercapacitors. Expanding the voltage window is an effective solution, which is strongly dependent on the design of the electrode material. Herein, hierarchical graphene oxide (GO)/manganese dioxide (MnO2)/cobalt-nickel layered double hydroxide (CoNi-LDH) onto activated carbon cloth (CC/GMCN) electrodes are fabricated through a sequential deposition approach. Density functional theory (DFT) calculations demonstrate that GO, MnO2 and CoNi-LDH can be tightly bound together by electrostatic interactions, declaring the construction of this triple heterogeneous structure is efficient and feasible. The assembled asymmetric supercapacitor, using the CC/GMCN as positive electrode and activated carbon (AC) as negative electrode, exhibits a voltage window of 1.9 V, a specific capacitance of 163.95 F/g at 1 A/g, along with an energy density of 82.12 W h kg−1 at a power density of 949.97 W kg−1. Furthermore, the device displays exceptional bending resistance, with the specific capacitance retaining 94.73 % after undergoing 1000 bending cycles. After 10,000 charging and discharging cycles, the device maintains a capacity retention of 92.62 % and sustains an almost 100 % coulombic efficiency. The prepared device underscores the promising real-world applications, and this research introduces an effective avenue for advancing the field of next-generation flexible supercapacitors.

engineering, chemical, environmental
Polyethylene Glycol Wrapped Alginate/Graphene Hollow Microfibers as Flexible Supercapacitors

Vahid Nasirian,Amir Ehsan Niaraki-Asli,Saurabh Aykar,Mehrnoosh Taghavimehr,Reza Montazami,Nicole Hashemi

DOI: https://doi.org/10.33774/chemrxiv-2021-11wh5

2021-11-08

Abstract:Carbon-modified fibrous structures with high biocompatibility have attracted much attention as supercapacitors due to their low cost, sustainability, abundance, and excellent electrochemical performance. However, some of these carbon-based materials suffer from low specific capacitance and electrochemical performance, which have been significant challenges in developing biocompatible electronic devices. In this regard, several studies have been reported on the development of 3D carbon-based micro architectures that provided high conductivity, energy storage potential, and 3D porosity frameworks. This study reports manufacturing of microfluidic Alginate hollow microfiber modified by water-soluble modified Graphene (BSA-Graphene). These architectures successfully exhibited conductivity enhancement conductivity of about 20 times more compared to Alginate hollow microfibers, and without any significant change in the inner-dimension values of hollow region (220.0 ± 10.0 μm) in comparison with pure alginate hollow microfibers. In the presence of Graphene, more obtained specific surface permeability and active ion adsorption sites could successfully provide as shorter pathways. These obtained continuous ion transport networks resulted in improved electrochemical performance. These desired electrochemical properties of the microfibers make Alginate/Graphene hollow fibers an excellent choice for further use in the development of lightweight flexible supercapacitors with scalable potential to be used in intelligent health electronic gadgets.

[CYTOLOGIC AND DYNAMIC EXAMINATION OF INFLAMMATORY SKIN EXUDATE IN HEALTHY SUBJECTS AND PATIENTS WITH VARIOUS FORMS OF LEUKEMIA].

Hierarchical 3D All-Carbon Composite Structure Modified with N-Doped Graphene Quantum Dots for High-Performance Flexible Supercapacitors

Assembling Nitrogen and Oxygen Co-Doped Graphene Quantum Dots Onto Hierarchical Carbon Networks for All-Solid-state Flexible Supercapacitors

Hierarchical Construction of High-Performance All-Carbon Flexible Fiber Supercapacitors with Graphene Hydrogel and Nitrogen-Doped Graphene Quantum Dots

Flexible Solid‐State Supercapacitors with Enhanced Performance from Hierarchically Graphene Nanocomposite Electrodes and Ionic Liquid Incorporated Gel Polymer Electrolyte

Tuning the Electronic and Electrochemical Properties of 3D Porous Laser‐Induced Graphene by Electrochemically Induced Deposition of Polyoxovanadate Nanoclusters for Flexible Supercapacitors

Membrane-assisted Assembly Strategy of Flexible Electrodes for Multifunctional Supercapacitors

Porous Multishelled Nio Hollow Microspheres Encapsulated Within Three-Dimensional Graphene As Flexible Free-Standing Electrodes For High-Performance Supercapacitors

Three-Dimensional Functionalized Graphenes with Systematical Control over the Interconnected Pores and Surface Functional Groups for High Energy Performance Supercapacitors

Flexible Solid-State Supercapacitors Based on Three-Dimensional Graphene Hydrogel Films

Flexible Solid-State Supercapacitor Fabricated by Metal-Organic Framework/graphene Oxide Hybrid Interconnected with PEDOT

Wet-spun Poly(ionic Liquid)-Graphene Hybrid Fibers for High Performance All-Solid-state Flexible Supercapacitors

Flexible and Alternately Layered High‐Loading Film Electrode based on 3D Carbon Nanocoils and PEDOT:PSS for High‐Energy‐Density Supercapacitor

Facile fabrication of hierarchically porous graphene/poly(1,5-diaminoanthraquinone) nanocomposite fibers as flexible and robust free-standing electrodes for solid-state supercapacitors

Highly Compressible Three-Dimensional Graphene Hydrogel for Foldable All-Solid-state Supercapacitor

[Absence of linkage disequilibrium at amyloid precursor protein gene locus in Japanese familial Alzheimer's disease with 717Val-->Ile mutation].

Rationally engineered interdigitated electrodes with heteroatom doped porous graphene and improved surface wettability for flexible micro-supercapacitors

A Flexible Solid-State Supercapacitor Based on Graphene/polyaniline Paper Electrodes

Three dimensional few layer graphene and carbon nanotube foam architectures for high fidelity supercapacitors

Hierarchical graphene oxide/manganese dioxide/cobalt-nickel layered double hydroxide electrodes for high energy density asymmetric flexible supercapacitor

Polyethylene Glycol Wrapped Alginate/Graphene Hollow Microfibers as Flexible Supercapacitors