Organic Fouling of ion Exchange Resins

I.M. Abrams

DOI: https://doi.org/10.1016/s0166-1116(08)71170-1

1982-01-01

Studies in Environmental Science

Abstract:A variety of organic substances in a water supply can prevent optimum operation of a deionizer. The most frequent problems are caused by humates and fulvates. Anion-exchange resins are more susceptible to these adverse effects than cation exchangers and mixed beds more than multiple beds. The symptoms of “organic fouling” are (a) increased rinse requirement, (b) increased sensitivity to flow rate and temperature, (c) deterioration in effluent quality (increased conductivity), and (d) decrease in operating capacity.Problems are more often encountered with surface waters than with deep well waters, particularly in areas where rainfall is high and vegetation is plentiful. Such waters frequently have yellow or brown colorants which have been identified as polymers of aromatic acids. These weak acids are similar in composition to a number of compounds which sorb irreversibly on strong-base resins.Organic fouling of mixed bed resins is effectively prevented by pretreatment of the water by a column of a granular, porous, phenolic weak-base adsorbent resin. Such resins, regenerated with dilute caustic soda, are more effective than activated carbon. Strong-base resins operated in the chloride cycle can be effective traps in some cases.The need for organic traps can sometimes be obviated by proper choice of ion-exchange system. The use of Type II resins operated counter-flow can often keep organic fouling under control.